Skip to main content

European Network for Alloys Behaviour Law Enhancement

Deliverables

Setting up standard test cases for each studied process

Setting up standard test cases for each studied process

First dissemination of research results (posters, publications, etc.)

First dissemination of research results (posters, publications, etc.)

Report of state of art in modelling of microstructure and deformation behaviour of selected alloys.

Report of state of art in modelling of microstructure and deformation behaviour of selected alloys.

Measuring temperature and kinetic fields during FSW, AM, machining and broaching

Measuring temperature and kinetic fields during FSW, AM, machining and broaching

Material simulation settings for microstructural modelling

Material simulation settings for microstructural modelling

Periodic progress report 1 including the analysis of TTB training research and dissemination questionnaires

Periodic progress report Number 1 including the analysis of TTB training research and dissemination questionnaires

Analysis and characterisation of deformed selected alloys

Analysis and characterisation of deformed selected alloys

Catalogue of all transferable skills available via each local host

Catalogue of all transferable skills available via each local host

Development of a new experimental bench dedicated to oblique cutting monitoring

Development of a new experimental bench dedicated to oblique cutting monitoring

Mechanical field extraction

Mechanical field extraction

Career development plan including individual plans

Career development plan including individual plans

Mahara registration, monitoring and training

Mahara registration, monitoring and training

Workshop organisation (France)

Workshop organisation (France)

ESR Recruitment

ESR Recruitment

Searching for OpenAIRE data...

Publications

Data Treatment of In Situ Monitoring Systems in Selective Laser Melting Machines

Author(s): Pinku Yadav, Olivier Rigo, Corinne Arvieu, Emilie Le Guen, Eric Lacoste
Published in: Advanced Engineering Materials, Issue 23/5, 2021, Page(s) 2001327, ISSN 1438-1656
DOI: 10.1002/adem.202001327

Relationships between welding parameters, aging conditions, and weld properties in AA7075-T6 friction stir welds

Author(s): D. Ambrosio, C. Garnier, V. Wagner, E. Aldanondo, G. Dessein, O. Cahuc
Published in: The International Journal of Advanced Manufacturing Technology, Issue 111/5-6, 2020, Page(s) 1333-1350, ISSN 0268-3768
DOI: 10.1007/s00170-020-06184-y

A Review on Strain Gradient Plasticity Approaches in Simulation of Manufacturing Processes

Author(s): Raffaele Russo, Franck Andrés Girot Mata, Samuel Forest, Dimitri Jacquin
Published in: Journal of Manufacturing and Materials Processing, Issue 4/3, 2020, Page(s) 87, ISSN 2504-4494
DOI: 10.3390/jmmp4030087

Plastic behavior-dependent weldability of heat-treatable aluminum alloys in friction stir welding

Author(s): Danilo Ambrosio, Vincent Wagner, Gilles Dessein, Jean-Yves Paris, Khouloud Jlaiel, Olivier Cahuc
Published in: The International Journal of Advanced Manufacturing Technology, 2021, ISSN 0268-3768
DOI: 10.1007/s00170-021-07754-4

Mechanical behavior and microstructure evolution during deformation of AA7075-T651

Author(s): Biswajit Dalai, Marie Anna Moretti, Paul Åkerström, Corinne Arvieu, Dimitri Jacquin, Lars-Erik Lindgren
Published in: Materials Science and Engineering: A, Issue 822, 2021, Page(s) 141615, ISSN 0921-5093
DOI: 10.1016/j.msea.2021.141615

High Strain Rate Deformation Behavior and Recrystallization of Alloy 718

Author(s): Marie Anna Moretti, Biswajit Dalai, Paul Åkerström, Corinne Arvieu, Dimitri Jacquin, Eric Lacoste, Lars-Erik Lindgren
Published in: Metallurgical and Materials Transactions A, 2021, ISSN 1073-5623
DOI: 10.1007/s11661-021-06463-7

High-Temperature Mechanical Properties of IN718 Alloy: Comparison of Additive Manufactured and Wrought Samples

Author(s): Trunal Bhujangrao, Fernando Veiga, Alfredo Suárez, Edurne Iriondo, Franck Girot Mata
Published in: Crystals, Issue 10/8, 2020, Page(s) 689, ISSN 2073-4352
DOI: 10.3390/cryst10080689

Influence of welding parameters on the microstructure, thermal fields and defect formation in AA7075-T6 friction stir welds

Author(s): D. Ambrosio, V. Wagner, C. Garnier, D. Jacquin, A. Tongne, M. Fazzini, O. Cahuc, G. Dessein
Published in: Welding in the World, 2020, ISSN 0043-2288
DOI: 10.1007/s40194-020-00869-4

In Situ Monitoring Systems of The SLM Process: On the Need to Develop Machine Learning Models for Data Processing

Author(s): Pinku Yadav, Olivier Rigo, Corinne Arvieu, Emilie Le Guen, Eric Lacoste
Published in: Crystals, Issue 10/6, 2020, Page(s) 524, ISSN 2073-4352
DOI: 10.3390/cryst10060524

Review of Intermediate Strain Rate Testing Devices

Author(s): Trunal Bhujangrao, Catherine Froustey, Edurne Iriondo, Fernando Veiga, Philippe Darnis, Franck Girot Mata
Published in: Metals, Issue 10/7, 2020, Page(s) 894, ISSN 2075-4701
DOI: 10.3390/met10070894

Lagrange multiplier based vs micromorphic gradient-enhanced rate-(in)dependent crystal plasticity modelling and simulation

Author(s): Jean-Michel Scherer, Vikram Phalke, Jacques Besson, Samuel Forest, Jérémy Hure, Benoît Tanguy
Published in: Computer Methods in Applied Mechanics and Engineering, Issue 372, 2020, Page(s) 113426, ISSN 0045-7825
DOI: 10.1016/j.cma.2020.113426

Inline Drift Detection Using Monitoring Systems and Machine Learning in Selective Laser Melting

Author(s): Pinku Yadav, Vibhutesh Kumar Singh, Thomas Joffre, Olivier Rigo, Corinne Arvieu, Emilie Le Guen, Eric Lacoste
Published in: Advanced Engineering Materials, 2020, Page(s) 2000660, ISSN 1438-1656
DOI: 10.1002/adem.202000660

Thermomechanics of Cosserat medium: modeling adiabatic shear bands in metals

Author(s): Raffaele Russo, Samuel Forest, Franck Andrés Girot Mata
Published in: Continuum Mechanics and Thermodynamics, 2020, ISSN 0935-1175
DOI: 10.1007/s00161-020-00930-z

Kinematic Fields Measurement during Orthogonal Cutting Using Digital Images Correlation: A Review

Author(s): Haythem Zouabi, Madalina Calamaz, Vincent Wagner, Olivier Cahuc, Gilles Dessein
Published in: Journal of Manufacturing and Materials Processing, Issue 5/1, 2021, Page(s) 7, ISSN 2504-4494
DOI: 10.3390/jmmp5010007

Experimental characterization of the AA7075 aluminum alloy using hot shear compression test

Author(s): Trunal Bhujangrao, Fernando Veiga, Catherine Froustey, Sandra Guérard, Edurne Iriondo, Philippe Darnis, Franck Girot Mata
Published in: Archives of Civil and Mechanical Engineering, Issue 21/2, 2021, ISSN 1644-9665
DOI: 10.1007/s43452-021-00194-7

Drift Detection in Selective Laser Melting (SLM) Using a Machine Learning Approach

Author(s): Pinku Yadav, Olivier Rigo, Corinne Arvieu, Emilie Le Guen, Eric Lacoste
Published in: Industrializing Additive Manufacturing - Proceedings of AMPA2020, 2021, Page(s) 177-191
DOI: 10.1007/978-3-030-54334-1_13

ENABLE (EUROPEAN NETWORK FOR ALLOYS BEHAVIOR LAW ENHANCEMENT), SIMULACIÓN DEL FUTURO PARA PROCESOS DE FABRICACIÓN

Author(s): FRANCK GIROT MATA, JOHAN JANSSON, FERNANDO VEIGA, ALBERTO ECHEVARRIA
Published in: DYNA INGENIERIA E INDUSTRIA, Issue 94/1, 2019, Page(s) 120-121, ISSN 1989-1490
DOI: 10.6036/9105

Thermodynamically consistent Johnson-Cook-like material model in Cosserat media under large deformations for future manufacturing simulation

Author(s): Russo Raffaele; Girot Franck; Forest Samuel
Published in: Issue 2, 2020