Objectif
With ARTEM (Aircraft noise Reduction Technologies and related Environmental iMpact), seven EREA members and strategic partners have teamed up with leading European universities and major entities of the European aerospace industry in order to address the technology challenges raised in the call MG-1-2-2017 “Reducing aviation noise”. ARTEM aims at the maturing of promising novel concepts and methods which are directly coupled to new low noise and disruptive 2035 and 2050 aircraft configurations. A core topic of ARTEM is the development of innovative technologies for the reduction of aircraft noise at the source. The approach chosen moves beyond the reduction of isolated sources as pure fan or landing gear noise and addresses the interaction of various components and sources - which often contributes significantly to the overall noise emission of the aircraft.
Secondly, ARTEM addresses innovative concepts for the efficient damping of engine noise and other sources by the investigation of dissipative surface materials and liners. The chosen technology concepts offer the chance to overcome shortcomings (as the narrow band absorption peak or poor low-frequency performance) of current devices. The tasks proposed will mature, and subsequently down select these technologies by comparative testing in a single relevant test setup. Furthermore, noise shielding potential for future aircraft configurations will be investigated. The noise reduction technologies will be coupled to the modelling of future aircraft configurations as the blended wing body (BWB) and other innovative concepts with integrated engines and distributed electrical propulsion. The impact of those new configurations with low noise technology will be assessed in several ways including industry tools, airport scenario predictions, and auralization.
Thereby, ARTEM constitutes a holistic approach for noise reduction for future aircrafts and provides enablers for the expected further increase of air traffic.
Champ scientifique
Programme(s)
Régime de financement
RIA - Research and Innovation actionCoordinateur
51147 Koln
Allemagne
Voir sur la carte
Participants (25)
1921 Martigny Croix
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
31060 Toulouse
Voir sur la carte
81043 Capua
Voir sur la carte
75794 Paris
Voir sur la carte
061126 Bucharest 6
Voir sur la carte
75008 Paris
Voir sur la carte
69134 Ecully
Voir sur la carte
1015 Lausanne
Voir sur la carte
8600 Dubendorf
Voir sur la carte
061126 Bucuresti
Voir sur la carte
1059 CM Amsterdam
Voir sur la carte
91120 Palaiseau
Voir sur la carte
Participation terminée
5270 Ajdovscina
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
15827 Blankenfelde-Mahlow
Voir sur la carte
Entité juridique autre qu’un sous-traitant qui est affiliée ou juridiquement liée à un participant. L’entité réalise des travaux dans les conditions prévues par la convention de subvention, fournit des biens ou des services pour l’action, mais n’a pas signé la convention de subvention. Le tiers respecte les règles applicables au participant qui lui est lié dans le cadre de la convention de subvention en ce qui concerne l’éligibilité des coûts et le contrôle des dépenses.
N1 9FX London
Voir sur la carte
75015 Paris
Voir sur la carte
SO17 1BJ Southampton
Voir sur la carte
Participation terminée
140180 ZHUKOVSKY
Voir sur la carte
38106 Braunschweig
Voir sur la carte
2628 CN Delft
Voir sur la carte
BS8 1QU Bristol
Voir sur la carte
95011 Cergy-Pontoise
Voir sur la carte
00154 Roma
Voir sur la carte
1640 Sint-Genesius-Rode
Voir sur la carte
5270 Ajdovscina
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.