3D micro-supercapacitors for embedded electronics

Informations projet

3D-CAP

N° de convention de subvention: 771793

DOI

10.3030/771793

Projet clôturé

Date de signature de la CE 28 Mars 2018

Date de début 1 Avril 2018

Date de fin 30 Septembre 2023

Financé au titre de

• EXCELLENT SCIENCE - European Research Council (ERC)

Coût total

€ 1 673 438,00

Contribution de l’UE

€ 1 673 438,00

Coordonné par

CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE CNRS
France

Periodic Reporting for period 4 - 3D-CAP (3D micro-supercapacitors for embedded electronics)

Période du rapport: 2022-10-01 au 2023-09-30

Résumé du contexte et des objectifs généraux du projet

The realization of high-performance micro-supercapacitors remains a significant challenge, despite the growing demand for miniaturized energy storage devices in applications ranging from wearable electronic gadgets to wireless sensor networks and the Internet of Things. While micro-supercapacitors offer rapid charge and discharge capabilities with a quasi-unlimited lifetime, their energy storage capacity has been a limiting factor. In the 3D-CAP project, we introduce a paradigm shift in micro-supercapacitor design, aiming to enhance energy storage capacities.

As a significant achievement, the project successfully developed micro-supercapacitor electrodes using hydrous ruthenium dioxide (RuO2), a pseudocapacitive material known for its high capacitance. A thin film of ruthenium oxide was conformally deposited onto a high-surface-area 3D current collector, prepared using an innovative dynamic template constructed with hydrogen bubbles. The structural features of these 3D architectures were precisely tailored through advanced processing methodologies, employing deposition methods such as Atomic Layer Deposition (ALD) or electrodeposition for the ruthenium oxide. The electrodes were combined with a groundbreaking solid electrolyte (protic ionogel) capable of operating over an extended cell voltage. Notably, prototypes demonstrate a huge electrode areal capacitance of 24 F/cm2, showcasing a significant leap in performance.

Travail effectué depuis le début du projet jusqu’à la fin de la période considérée dans le rapport et principaux résultats atteints jusqu’à présent

The project unfolded through four main tasks: the fabrication of 3D current collectors, modeling and deposition of pseudocapacitive material, development of a protic ionogel electrolyte, and realization of all-solid-state microsupercapacitor prototypes. All work packages were successfully implemented, resulting in highly porous metallic current collectors and 3D microsupercapacitor electrodes with exceptional capacitance. Notably, prototypes with diverse designs were invevestigated.
Additionally, a better understanding of the pseudocapacitance mechanisms in hydrous ruthenium dioxide electrodes was achieved through ab initio Molecular Dynamics Simulations, providing valuable insights into the electrochemical reactions occurring in these materials.

Progrès au-delà de l’état des connaissances et impact potentiel prévu (y compris l’impact socio-économique et les conséquences sociétales plus larges du projet jusqu’à présent)

The anticipated outcome of the 3D-CAP project is the creation of 3D micro-supercapacitors exhibiting exceptionally high power and extended lifetime. A major breakthrough has been achieved, with electrode areal capacitance reaching an impressive 24 F/cm2, surpassing previous expectations. The project envisions pushing these boundaries further, with ongoing efforts to optimize the design and characteristics of prototypes. These achievements mark a significant advancement beyond the current state of the art in micro-supercapacitor technology.
The project aims to contribute valuable insights into the field of energy storage and micro-supercapacitor development. Exploitation and dissemination efforts are underway to share these advancements with the scientific community and industry stakeholders. The better understanding of pseudocapacitance mechanisms through ab initio Molecular Dynamics Simulations further enhances the project's scientific impact. The project team looks forward to the next phase, building upon the knowledge gained and technological innovations to unlock new possibilities in micro-supercapacitor applications.

Micro-supercapacitor device based on porous RuO2 for on-chip electronics