3D micro-supercapacitors for embedded electronics

Informazioni relative al progetto

3D-CAP

ID dell’accordo di sovvenzione: 771793

DOI

10.3030/771793

Progetto chiuso

Data della firma CE 28 Marzo 2018

Data di avvio 1 Aprile 2018

Data di completamento 30 Settembre 2023

Finanziato da

• EXCELLENT SCIENCE - European Research Council (ERC)

Costo totale

€ 1 673 438,00

Contributo UE

€ 1 673 438,00

Coordinato da

CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE CNRS
France

Periodic Reporting for period 4 - 3D-CAP (3D micro-supercapacitors for embedded electronics)

Periodo di rendicontazione: 2022-10-01 al 2023-09-30

Sintesi del contesto e degli obiettivi generali del progetto

The realization of high-performance micro-supercapacitors remains a significant challenge, despite the growing demand for miniaturized energy storage devices in applications ranging from wearable electronic gadgets to wireless sensor networks and the Internet of Things. While micro-supercapacitors offer rapid charge and discharge capabilities with a quasi-unlimited lifetime, their energy storage capacity has been a limiting factor. In the 3D-CAP project, we introduce a paradigm shift in micro-supercapacitor design, aiming to enhance energy storage capacities.

As a significant achievement, the project successfully developed micro-supercapacitor electrodes using hydrous ruthenium dioxide (RuO2), a pseudocapacitive material known for its high capacitance. A thin film of ruthenium oxide was conformally deposited onto a high-surface-area 3D current collector, prepared using an innovative dynamic template constructed with hydrogen bubbles. The structural features of these 3D architectures were precisely tailored through advanced processing methodologies, employing deposition methods such as Atomic Layer Deposition (ALD) or electrodeposition for the ruthenium oxide. The electrodes were combined with a groundbreaking solid electrolyte (protic ionogel) capable of operating over an extended cell voltage. Notably, prototypes demonstrate a huge electrode areal capacitance of 24 F/cm2, showcasing a significant leap in performance.

Lavoro eseguito dall’inizio del progetto fino alla fine del periodo coperto dalla relazione e principali risultati finora ottenuti

The project unfolded through four main tasks: the fabrication of 3D current collectors, modeling and deposition of pseudocapacitive material, development of a protic ionogel electrolyte, and realization of all-solid-state microsupercapacitor prototypes. All work packages were successfully implemented, resulting in highly porous metallic current collectors and 3D microsupercapacitor electrodes with exceptional capacitance. Notably, prototypes with diverse designs were invevestigated.
Additionally, a better understanding of the pseudocapacitance mechanisms in hydrous ruthenium dioxide electrodes was achieved through ab initio Molecular Dynamics Simulations, providing valuable insights into the electrochemical reactions occurring in these materials.

Progressi oltre lo stato dell’arte e potenziale impatto previsto (incluso l’impatto socioeconomico e le implicazioni sociali più ampie del progetto fino ad ora)

The anticipated outcome of the 3D-CAP project is the creation of 3D micro-supercapacitors exhibiting exceptionally high power and extended lifetime. A major breakthrough has been achieved, with electrode areal capacitance reaching an impressive 24 F/cm2, surpassing previous expectations. The project envisions pushing these boundaries further, with ongoing efforts to optimize the design and characteristics of prototypes. These achievements mark a significant advancement beyond the current state of the art in micro-supercapacitor technology.
The project aims to contribute valuable insights into the field of energy storage and micro-supercapacitor development. Exploitation and dissemination efforts are underway to share these advancements with the scientific community and industry stakeholders. The better understanding of pseudocapacitance mechanisms through ab initio Molecular Dynamics Simulations further enhances the project's scientific impact. The project team looks forward to the next phase, building upon the knowledge gained and technological innovations to unlock new possibilities in micro-supercapacitor applications.

Micro-supercapacitor device based on porous RuO2 for on-chip electronics