HIgh PERformance Journal Bearing Technology for new geared TurboFAN generations

Project Information

HIPERFAN

Grant agreement ID: 785414

DOI 10.3030/785414

Project closed

EC signature date 16 February 2018

Start date 1 March 2018

End date 28 February 2022

Funded under

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Total cost € 2 999 526,64

EU contribution € 2 999 526,64

Coordinated by

HIGH TECH COATINGS GMBH
Austria

Deliverables

Documents, reports (2)

Plan for Communication and Dissemination of project results

Plan for Communication, Dissemination of project results

Report on Communication and Dissemination actions

Publications

Thesis and dissertations (15)

Kalibrierung einer Virtuellen Maschine (VM) und Abgleich mit dem Experiment anhand von Cu/Sn-Schichten

Author(s): Manuel Mandl
Published in: Bachelor Thesis, Issue 2020, 2020
Publisher: TU Wien

Härte- und Eigenspannungsmessung von CuPb und CuPbSn Schichten

Author(s): Laura Gollner
Published in: Bachelor Thesis, Issue 2018, 2018
Publisher: TU Wien

Modelscale methodology for the tribological characterization of novel highly stressed journal bearing systems

Author(s): Philipp Renhart
Published in: Dissertation, Issue 2022, 2022, ISSN 1650-0943
Publisher: Montanuniversität Leoben

Characterisierung der Sputterraten und Beschichtungsverteilung von Magnetron Sputterquellen

Author(s): Thomas Angerler
Published in: Bachelor Thesis, Issue 2020, 2020
Publisher: TU Wien

Charakterisierung einer segmentierten Cu-Pb-Sn Stabkathode

Author(s): Christoph Koller
Published in: Bachelor Thesis, Issue 2019, 2019
Publisher: TU Wien

Simulation of the sputtering process of tribology layers in journal bearings

Author(s): Fabian Hauser
Published in: Bachelor Thesis, Issue 2021, 2021
Publisher: Donau University Krems

Evaluierung von Strom uns Spannungskennlinien während der Magnetron-Sputter-Reinigung von oxidiertem Stahl

Author(s): Michael Tucherl
Published in: Bachelor Thesis, Issue 2020, 2020
Publisher: TU Wien

Rauheitsmessung von geschliffenen und anschließend sputtergeätzten Stahlsubstraten

Author(s): Sebastian Eitenberger
Published in: Bachelor Thesis, Issue 2019, 2019
Publisher: TU Wien

Design der Strukturentwicklung in gesputterten Mehrkomponenten-Schichten mit Hilfe einer interaktiven Raytracing-Software

Author(s): Böhm David
Published in: Dissertation, Issue 2023, 2023
Publisher: University of Technology Vienna

"Characterisation and temperature dependent composition of copper-lead-tin thin films""Vienna University of Technology"

Author(s): Nikolaus Resch
Published in: Bachelor Thesis, Issue 2019, 2019
Publisher: TU Wien

The behavior of sputter rate, island density and island size at different substrate temperatures in the sputter deposition process of lea

Author(s): Florian Gruber
Published in: Bachelor Thesis, Issue 2018, 2018
Publisher: TU Wien

Vermessung, Evaluierung und Simulation von Magnetronkonfigurationen

Author(s): Matija Kusztrich
Published in: Bachelor Thesis, Issue 2021, 2021
Publisher: TU Wien

Charakterisierung segmentierter Sputtertargets mit Augenmerk auf das Bondingmaterial und die -verarbeitung

Author(s): Severin K. J. Ivanka
Published in: Bachelor Thesis, Issue 2021, 2021
Publisher: TU Wien

Entwicklung eines optischen Messverfahrens zum Monitoring von thermisch oxidierten Stahloberflächen während Ionenreinigungsprozessen

Author(s): Lukas Thajer
Published in: Thesis, Issue 2021, 2021, ISSN 1633-5034
Publisher: TU Wien

Beurteilung des lokalen Verschleißes bleifreier silberbasierter Gleitlagerbeschichtungen

Author(s): Posch Christoph
Published in: Bachelor thesis, Issue 2022, 2022
Publisher: Montan University Leoben

Other (7)

Prediction of composition and crystalline structure of sputtered multi-component coatings by a Virtual Machine

Author(s): David Böhm, Thomas Schrefl, Andreas Eder, Christoph Eisenmenger-Sittner
Published in: 18TH INTERNATIONAL CONFERENCE ON THIN FILMS & 18TH JOINT VACUUM CONFERENCE, Book of Abstracts, Issue 2020, 2019, Page(s) 78
Publisher: 18TH INTERNATIONAL CONFERENCE ON THIN FILMS & 18TH JOINT VACUUM CONFERENC

A baseline study for developing novel coatings for high performance journal bearings in aircraftturbines

Author(s): Philipp RENHART, F. GRÜN; F. SUMMER; A. EDER
Published in: EcoTrib 2019, Issue 2019, 2019
Publisher: Ecotrib 2019

Structure and Crystallographic Properties of Multi-Material Coatings Deposited in a Combinatorial Sputter Plant Compared to Simulations from the Machine Level to Microstructure

Author(s): David Böhm, T. Schrefl, A. Eder, C. Eisenmenger-Sittner
Published in: ICMCTF2023, Issue 2023, 2023
Publisher: ICMCTF 2023

Prediction of Composition and Properties of Sputtered Multicomponent Coatings by an Interactive Ray

Author(s): David Böhm, Thomas Schrefl, Andreas Eder, Christoph Eisenmenger-Sittner1
Published in: Poster Presentation, Issue 2019, 2019
Publisher: IVC 21

Prediction of composition, crystalline structure and microstructure of sputtered multi-component coatings by a Virtual Machine

Author(s): Chistoph Eisenmenger-Sittner, Andreas Eder, David Böhm, Thomas Schrefl
Published in: 47th International Conference on Metalurgical Coatings and Thin Films, Issue 2021, 2021
Publisher: "47th International Conference on Metalurgical Coatings and Thin Films ""Prediction of"

High rate magnetron sputtering and computer supported modelling as a tool to create complex materials

Author(s): C. Eisenmenger-Sittner, D. Böhm, J. Kirschner
Published in: 18TH INTERNATIONAL CONFERENCE ON THIN FILMS & 18TH JOINT VACUUM CONFERENCE, Book of Abstracts, Issue 2019, 2019, Page(s) 12
Publisher: 18TH INTERNATIONAL CONFERENCE ON THIN FILMS & 18TH JOINT VACUUM CONFERENCE

Prediction of composition and structural properties of sputtered multi-component coatings by a Virtual Machine

Author(s): Christoph Eisenmenger Sittner, Andreas Eder, David Böhm, Thomas Schrefl
Published in: Seminar der Österreichischen Gesellschaft für Vakuumtechnik 2021, Issue 2021, 2021
Publisher: Österreichischen Gesellschaft für Vakuumtechnik 2021

Peer reviewed articles (3)

The tribological performance of silver in aircraft turbine load cases

Author(s): Philipp Renhart; Florian Summer; Florian Grün; Christoph Posch; Andreas Eder
Published in: Tribology International, Issue Volume 163, 2021, ISSN 0301-679X
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.triboint.2021.107184

Monitoring Tribological Events by Acoustic Emission Measurements for Bearing Contacts

Author(s): Philipp Renhart; Michael Maier; Christopher Strablegg; Florian Summer; Florian Grün; Andreas Eder
Published in: Lubricants, Issue 9/11, 2021, ISSN 2075-4442
Publisher: MDPI
DOI: 10.3390/lubricants9110109

Close-to-Application Test Methodology Validated by a Baseline Study for Novel Bearing Developments in Aircraft Turbines

Author(s): Philipp Renhart, Florian Summer, Florian Grün, Andreas Eder
Published in: Lubricants, Issue 8/1, 2020, Page(s) 7, ISSN 2075-4442
Publisher: MDPI AG
DOI: 10.3390/lubricants8010007