HIgh PERformance Journal Bearing Technology for new geared TurboFAN generations

Informazioni relative al progetto

HIPERFAN

ID dell’accordo di sovvenzione: 785414

DOI

10.3030/785414

Progetto chiuso

Data della firma CE 16 Febbraio 2018

Data di avvio 1 Marzo 2018

Data di completamento 28 Febbraio 2022

Finanziato da

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Costo totale

€ 2 999 526,64

Contributo UE

€ 2 999 526,64

Coordinato da

HIGH TECH COATINGS GMBH
Austria

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (2)

Plan for Communication and Dissemination of project results

Plan for Communication, Dissemination of project results

Report on Communication and Dissemination actions

Pubblicazioni

Thesis and dissertations (15)

Kalibrierung einer Virtuellen Maschine (VM) und Abgleich mit dem Experiment anhand von Cu/Sn-Schichten

Autori: Manuel Mandl
Pubblicato in: Bachelor Thesis, Numero 2020, 2020
Editore: TU Wien

Härte- und Eigenspannungsmessung von CuPb und CuPbSn Schichten

Autori: Laura Gollner
Pubblicato in: Bachelor Thesis, Numero 2018, 2018
Editore: TU Wien

Modelscale methodology for the tribological characterization of novel highly stressed journal bearing systems

Autori: Philipp Renhart
Pubblicato in: Dissertation, Numero 2022, 2022, ISSN 1650-0943
Editore: Montanuniversität Leoben

Characterisierung der Sputterraten und Beschichtungsverteilung von Magnetron Sputterquellen

Autori: Thomas Angerler
Pubblicato in: Bachelor Thesis, Numero 2020, 2020
Editore: TU Wien

Charakterisierung einer segmentierten Cu-Pb-Sn Stabkathode

Autori: Christoph Koller
Pubblicato in: Bachelor Thesis, Numero 2019, 2019
Editore: TU Wien

Simulation of the sputtering process of tribology layers in journal bearings

Autori: Fabian Hauser
Pubblicato in: Bachelor Thesis, Numero 2021, 2021
Editore: Donau University Krems

Evaluierung von Strom uns Spannungskennlinien während der Magnetron-Sputter-Reinigung von oxidiertem Stahl

Autori: Michael Tucherl
Pubblicato in: Bachelor Thesis, Numero 2020, 2020
Editore: TU Wien

Rauheitsmessung von geschliffenen und anschließend sputtergeätzten Stahlsubstraten

Autori: Sebastian Eitenberger
Pubblicato in: Bachelor Thesis, Numero 2019, 2019
Editore: TU Wien

Design der Strukturentwicklung in gesputterten Mehrkomponenten-Schichten mit Hilfe einer interaktiven Raytracing-Software

Autori: Böhm David
Pubblicato in: Dissertation, Numero 2023, 2023
Editore: University of Technology Vienna

"Characterisation and temperature dependent composition of copper-lead-tin thin films""Vienna University of Technology"

Autori: Nikolaus Resch
Pubblicato in: Bachelor Thesis, Numero 2019, 2019
Editore: TU Wien

The behavior of sputter rate, island density and island size at different substrate temperatures in the sputter deposition process of lea

Autori: Florian Gruber
Pubblicato in: Bachelor Thesis, Numero 2018, 2018
Editore: TU Wien

Vermessung, Evaluierung und Simulation von Magnetronkonfigurationen

Autori: Matija Kusztrich
Pubblicato in: Bachelor Thesis, Numero 2021, 2021
Editore: TU Wien

Charakterisierung segmentierter Sputtertargets mit Augenmerk auf das Bondingmaterial und die -verarbeitung

Autori: Severin K. J. Ivanka
Pubblicato in: Bachelor Thesis, Numero 2021, 2021
Editore: TU Wien

Entwicklung eines optischen Messverfahrens zum Monitoring von thermisch oxidierten Stahloberflächen während Ionenreinigungsprozessen

Autori: Lukas Thajer
Pubblicato in: Thesis, Numero 2021, 2021, ISSN 1633-5034
Editore: TU Wien

Beurteilung des lokalen Verschleißes bleifreier silberbasierter Gleitlagerbeschichtungen

Autori: Posch Christoph
Pubblicato in: Bachelor thesis, Numero 2022, 2022
Editore: Montan University Leoben

Other (7)

Prediction of composition and crystalline structure of sputtered multi-component coatings by a Virtual Machine

Autori: David Böhm, Thomas Schrefl, Andreas Eder, Christoph Eisenmenger-Sittner
Pubblicato in: 18TH INTERNATIONAL CONFERENCE ON THIN FILMS & 18TH JOINT VACUUM CONFERENCE, Book of Abstracts, Numero 2020, 2019, Pagina/e 78
Editore: 18TH INTERNATIONAL CONFERENCE ON THIN FILMS & 18TH JOINT VACUUM CONFERENC

A baseline study for developing novel coatings for high performance journal bearings in aircraftturbines

Autori: Philipp RENHART, F. GRÜN; F. SUMMER; A. EDER
Pubblicato in: EcoTrib 2019, Numero 2019, 2019
Editore: Ecotrib 2019

Structure and Crystallographic Properties of Multi-Material Coatings Deposited in a Combinatorial Sputter Plant Compared to Simulations from the Machine Level to Microstructure

Autori: David Böhm, T. Schrefl, A. Eder, C. Eisenmenger-Sittner
Pubblicato in: ICMCTF2023, Numero 2023, 2023
Editore: ICMCTF 2023

Prediction of Composition and Properties of Sputtered Multicomponent Coatings by an Interactive Ray

Autori: David Böhm, Thomas Schrefl, Andreas Eder, Christoph Eisenmenger-Sittner1
Pubblicato in: Poster Presentation, Numero 2019, 2019
Editore: IVC 21

Prediction of composition, crystalline structure and microstructure of sputtered multi-component coatings by a Virtual Machine

Autori: Chistoph Eisenmenger-Sittner, Andreas Eder, David Böhm, Thomas Schrefl
Pubblicato in: 47th International Conference on Metalurgical Coatings and Thin Films, Numero 2021, 2021
Editore: "47th International Conference on Metalurgical Coatings and Thin Films ""Prediction of"

High rate magnetron sputtering and computer supported modelling as a tool to create complex materials

Autori: C. Eisenmenger-Sittner, D. Böhm, J. Kirschner
Pubblicato in: 18TH INTERNATIONAL CONFERENCE ON THIN FILMS & 18TH JOINT VACUUM CONFERENCE, Book of Abstracts, Numero 2019, 2019, Pagina/e 12
Editore: 18TH INTERNATIONAL CONFERENCE ON THIN FILMS & 18TH JOINT VACUUM CONFERENCE

Prediction of composition and structural properties of sputtered multi-component coatings by a Virtual Machine

Autori: Christoph Eisenmenger Sittner, Andreas Eder, David Böhm, Thomas Schrefl
Pubblicato in: Seminar der Österreichischen Gesellschaft für Vakuumtechnik 2021, Numero 2021, 2021
Editore: Österreichischen Gesellschaft für Vakuumtechnik 2021

Peer reviewed articles (3)

The tribological performance of silver in aircraft turbine load cases

Autori: Philipp Renhart; Florian Summer; Florian Grün; Christoph Posch; Andreas Eder
Pubblicato in: Tribology International, Numero Volume 163, 2021, ISSN 0301-679X
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.triboint.2021.107184

Monitoring Tribological Events by Acoustic Emission Measurements for Bearing Contacts

Autori: Philipp Renhart; Michael Maier; Christopher Strablegg; Florian Summer; Florian Grün; Andreas Eder
Pubblicato in: Lubricants, Numero 9/11, 2021, ISSN 2075-4442
Editore: MDPI
DOI: 10.3390/lubricants9110109

Close-to-Application Test Methodology Validated by a Baseline Study for Novel Bearing Developments in Aircraft Turbines

Autori: Philipp Renhart, Florian Summer, Florian Grün, Andreas Eder
Pubblicato in: Lubricants, Numero 8/1, 2020, Pagina/e 7, ISSN 2075-4442
Editore: MDPI AG
DOI: 10.3390/lubricants8010007