Methodology Development and Validation of WEight Optimized Stiffeners Run-Out Design for Future Composite Wings

Informations projet

DOVER

N° de convention de subvention: 785463

DOI

10.3030/785463

Projet clôturé

Date de signature de la CE 12 Février 2018

Date de début 1 Mars 2018

Date de fin 31 Juillet 2021

Financé au titre de

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Coût total

€ 742 430,26

Contribution de l’UE

€ 742 430,00

Coordonné par

UNIVERSIDAD DE SEVILLA
Spain

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Demonstrators, pilots, prototypes (1)

D4.1 Test components manufacturing

This document reports the manufacturing of optimized stiffener runout configurations specimens and multistiffened panel executed by SOFITEC

Documents, reports (6)

D4.2 test report for optimized mono-stiffener run out and multi-stiffened panel

Report on the mechanical tests performed of the different optimized configurations and multistiffened panel established in WP3 This report includes the analysis of the results obtained as well as additional information of the tests equipment and sensors used inspections performed

D5.4 Dissemination and exploitation final report

Dissemination and exploitation final report

D1.1 - Test definition programme

This deliverable acts as a test plan for the initial configurations establish by Topic Manager, the optimized configurations to be performed in WP4 and the Multi-Stiffener panel test.

D3.2 Scale up design solution for multi-stiffener panel

This report will show the scaleup process of the innovative design methodology developed for its future application on multistiffener panels as well as the conclusions achieved

D1.3 Test analysis report

Report on the mechanical tests performed of the different configurations established by the Topic Manager This report includes the analysis of the results obtained as well as additional information of the tests as equipment sensors inspections

D5.2 Dissemination and exploitation plan

Report on exploitation and dissemination actions programmed to be performed during the project.

Open Research Data Pilot (1)

D5.1 Data management Plan

Report includes information: • on handling of research data during and after the end of the project • on data that will be collected, processed and/or generated • which methodology and standards will be applied • on data that will be shared/made open access”

Publications

Peer reviewed articles (3)

Fracture performance of innovative composite runout panels. Part IIConfiguration optimization

Auteurs: G. Pacheco, J. Justo, J. Reinoso, J. Caas, A. Blzquez
Publié dans: Composite structures, 2022, ISSN 0263-8223
Éditeur: Elsevier BV

Fracture performance of innovative composite runout panels. Part IExperimental and global-local FE modeling

Auteurs: J. Reinoso, G. Pacheco, J. Justo, J. Caas, A. Blzquez
Publié dans: Composite structures, 2022, ISSN 0263-8223
Éditeur: Elsevier BV

Experimental study of composite stiffened coupons submitted to impacts under tensile and compression loads

Auteurs: J. Justo, J. Reinoso, G. Pacheco, A. Blzquez, J. Caas
Publié dans: Composites Part B: Engineering, 2022, ISSN 1359-8368
Éditeur: Pergamon Press Ltd.