Methodology Development and Validation of WEight Optimized Stiffeners Run-Out Design for Future Composite Wings

Informazioni relative al progetto

DOVER

ID dell’accordo di sovvenzione: 785463

DOI

10.3030/785463

Progetto chiuso

Data della firma CE 12 Febbraio 2018

Data di avvio 1 Marzo 2018

Data di completamento 31 Luglio 2021

Finanziato da

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Costo totale

€ 742 430,26

Contributo UE

€ 742 430,00

Coordinato da

UNIVERSIDAD DE SEVILLA
Spain

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Demonstrators, pilots, prototypes (1)

D4.1 Test components manufacturing

This document reports the manufacturing of optimized stiffener runout configurations specimens and multistiffened panel executed by SOFITEC

Documents, reports (6)

D4.2 test report for optimized mono-stiffener run out and multi-stiffened panel

Report on the mechanical tests performed of the different optimized configurations and multistiffened panel established in WP3 This report includes the analysis of the results obtained as well as additional information of the tests equipment and sensors used inspections performed

D5.4 Dissemination and exploitation final report

Dissemination and exploitation final report

D1.1 - Test definition programme

This deliverable acts as a test plan for the initial configurations establish by Topic Manager, the optimized configurations to be performed in WP4 and the Multi-Stiffener panel test.

D3.2 Scale up design solution for multi-stiffener panel

This report will show the scaleup process of the innovative design methodology developed for its future application on multistiffener panels as well as the conclusions achieved

D1.3 Test analysis report

Report on the mechanical tests performed of the different configurations established by the Topic Manager This report includes the analysis of the results obtained as well as additional information of the tests as equipment sensors inspections

D5.2 Dissemination and exploitation plan

Report on exploitation and dissemination actions programmed to be performed during the project.

Open Research Data Pilot (1)

D5.1 Data management Plan

Report includes information: • on handling of research data during and after the end of the project • on data that will be collected, processed and/or generated • which methodology and standards will be applied • on data that will be shared/made open access”

Pubblicazioni

Peer reviewed articles (3)

Fracture performance of innovative composite runout panels. Part IIConfiguration optimization

Autori: G. Pacheco, J. Justo, J. Reinoso, J. Caas, A. Blzquez
Pubblicato in: Composite structures, 2022, ISSN 0263-8223
Editore: Elsevier BV

Fracture performance of innovative composite runout panels. Part IExperimental and global-local FE modeling

Autori: J. Reinoso, G. Pacheco, J. Justo, J. Caas, A. Blzquez
Pubblicato in: Composite structures, 2022, ISSN 0263-8223
Editore: Elsevier BV

Experimental study of composite stiffened coupons submitted to impacts under tensile and compression loads

Autori: J. Justo, J. Reinoso, G. Pacheco, A. Blzquez, J. Caas
Pubblicato in: Composites Part B: Engineering, 2022, ISSN 1359-8368
Editore: Pergamon Press Ltd.