Description du projet
Les revêtements anti-insectes pour avions améliorent le rendement énergétique
Les matériaux de l’avion doivent être conçus de manière à assurer un écoulement régulier de l’air. Cependant, le collage des insectes provoque une rugosité de la surface et peut augmenter la traînée de l’avion et la consommation de carburant. Le projet CHOPIN, financé par l’UE, vise à résoudre ce problème en mettant au point des revêtements hydrophobes durables qui contribuent à réduire l’adhésion des insectes. Les chercheurs utiliseront différentes méthodologies chimiques pour déposer les formulations de revêtement générées sur l’avion. Des simulations et des essais de drones permettront d’évaluer leur performance face à la contamination par les insectes lors du décollage, du vol et de l’atterrissage. Les connaissances générées seront précieuses pour comprendre et réduire la contamination dans divers contextes, ce qui permettra d’étendre les applications de ce type de revêtement dans les trains et les véhicules automobiles.
Objectif
The aircraft industry has long been concerned with the increase of drag impacting directly the fuel consumption of airplanes. Different researches have shown that the insect sticking causes a surface roughness disrupting the laminar flow. Several methods have been used to solve the problem and the most important parameter playing a role in the reduction of insect adhesion on aircraft wings is the surface energy. Indeed, during the last 60 years different modifications of the wing leading edges such as elastic surfaces, soluble films or fluid covers have been proposed. The use of coatings to mitigate the insect contamination shows great potential but critical issues still remain due to lack of durability. The objectives of CHOPIN are the development of highly durable hydrophobic coatings which can be applied to micro-perforated surfaces typically used for drag reduction and the validation of the technology and the coating process proposed by using tests clearly assessing the mitigation of insect contamination under realistic conditions. Different technologies are considered in the project which presently allows to obtain hydrophobic surfaces : wet-chemistry deposition and dry technologies (plasma and spray).
To meet the application requirement these coatings will be optimized. Furthermore, the application process needs to preserve the holes and keep the efficiency of the HLFC leading edges. The efficiency of the proposed technologies will be compared to the commercial products and the coatings will be characterized by lab and simulated tests. Indeed, firstly, a classification considering the adherence to the substrates, the hardness, the flexibility, UV resistance, rain and sand erosion resistance and the resistance to aircrafts liquids will be done.
The insect contamination and cleaning behaviour of the best coatings will be then demonstrated both, during simulated environment and during representative environment. Test under real condition will be done using drones which will allow a statistical evaluation of the insect impact and contamination behaviour of typical A/C leading edges under realistic A/C environment during take-off, landing and flight.
Champ scientifique
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraft
- engineering and technologymaterials engineeringcoating and films
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringroboticsautonomous robotsdrones
- natural sciencesbiological scienceszoologyentomology
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaeronautical engineering
Programme(s)
Régime de financement
CS2-IA - Innovation actionCoordinateur
7000 Mons
Belgique