Deliverables Open Research Data Pilot (1) Data management plan Complete data management plan formulated. Publications Conference proceedings (11) Influence of shielding gas flow on the uniformity of additively manufactured martensitic stainless steel Author(s): Z Pan, V K Nadimpalli, T L Christiansen, S A Andersen, M B Kjer, O V Mishin and Y Zhang Published in: 2022 Publisher: I O P Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/1249/1/012026 Texture in cold rolled and high-temperature annealed Cu foils Author(s): J. Guo, X. Li, G. L. Wu, R. Q. Zhang, T. L. Huang, H. F. Shi, C. L. Zhang, D. Juul Jensen, X. Huang Published in: 2022 Publisher: IOP Publishing Ltd DOI: 10.1088/1757-899x/1249/1/012052 Deformation Mechanisms in Tool–Workpiece Asperity Contact in Metal Forming Author(s): Chris Valentin Nielsen, Xiaodan Zhang, Marcel Moghadam, Niels Hansen, Niels Bay Published in: The Minerals, Metals & Materials Series, Forming the Future, 2021, Page(s) 127-137, ISBN 978-3-030-75381-8 Publisher: Springer Link DOI: 10.1007/978-3-030-75381-8_10 In-situ X-ray microtomography of interface between additively manufactured aluminium bronze and H13 tool steel Author(s): Håkon Linga, Yubin Zhang, Vegard Brøtan, Xiaobo Ren, Ida Westermann and Bjørn Holmedal Published in: 2022 Publisher: I O P Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/1249/1/012042 Stored energy calculation in AA 1050 based on deformation microstructure from electron backscatter diffraction data Author(s): Y. Han, H. Pan, A. Godfrey, D. Juul Jensen, X. Zhang Published in: 2022 Publisher: IOP Publishing Ltd DOI: 10.1088/1757-899x/1249/1/012064 Effects of alloying, microstructure and texture on the strength–ductility trade-off in layered aluminum Author(s): Y. P. Xia, H. Wu, K. S. Miao, L. Geng, G. H. Fan, T. Yu, D. Juul Jensen Published in: 2022 Publisher: IOP Publishing Ltd DOI: 10.1088/1757-899x/1249/1/012037 Registration of data from a multimodal investigation of particle stimulated nucleation in aluminum Author(s): E. F. F. Knipschildt, X. Lei, Y. B. Zhang, T. Yu, S. Fæster, W. Liu, R. E. Sanders, D. Juul Jensen Published in: IOP Conference Series: Materials Science and Engineering, 2022 Publisher: IOP Publishing Ltd DOI: 10.1088/1757-899x/1249/1/012049 Recovery of small prientation gradients in a ercystallized grain observed in 3D during ex-situ annealing Author(s): C. Hong, Y. Zhang, T. Yu, W. Liu, D. Juul Jensen Published in: IOP Conference Series: Materials Science and Engineering, 2022 Publisher: IOP Publishing Ltd DOI: 10.1088/1757-899x/1249/1/012050 Effect of annealing on microstructure in railway wheel steel Author(s): Dimitrios Nikas, Yubin Zhang and Johan Ahlström Published in: 2022 Publisher: I O P Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/1249/1/012059 Recrystallization kinetics of the AA5xxx series aluminum alloys - revisited Author(s): R. Vandermeer, F. Lin, X. Lei, R. E. Sanders, D. Juul Jensen Published in: 2022 Publisher: IOP Publishing Ltd DOI: 10.1088/1757-899x/1249/1/012060 Microstructural evolution during recovery of deformed aluminium—Effect of deformation strain Author(s): Tianbo Yu Published in: 2022 Publisher: IOP Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/1249/1/012001 Peer reviewed articles (89) Enhancement of an additive-manufactured austenitic stainless steel by post-manufacture heat-treatment Author(s): Nan Chen, Guoqiang Ma, Wanquan Zhu, Andrew Godfrey, Zhijian Shen, Guilin Wu, Xiaoxu Huang Published in: Materials Science and Engineering: A, Issue 759, 2019, Page(s) 65-69, ISSN 0921-5093 Publisher: Elsevier BV DOI: 10.1016/j.msea.2019.04.111 Particle stimulated nucleation revisited in three dimensions: a laboratory-based multimodal X-ray tomography investigation Author(s): Robert E. Sanders; Florian Bachmann; Yubin Zhang; Jun Sun; Xiaofang Yang; Dorte Juul Jensen; Xiuchuan Lei Published in: Materials Research Letters, Vol 9, Iss 1, Pp 65-70 (2021), Issue 9/1, 2021, Page(s) 65-70, ISSN 2166-3831 Publisher: Materials Research Letters DOI: 10.1080/21663831.2020.1822455 Recrystallization boundary migration in the 3D heterogeneous microstructure near a hardness indent Author(s): Chuanshi Hong, Yubin Zhang, Adam Lindkvist, Wenjun Liu, Jon Tischler, Ruqing Xu, Dorte Juul Jensen Published in: Scripta Materialia, Issue 205, 2021, Page(s) 114187, ISSN 1359-6462 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.scriptamat.2021.114187 Importance of deformation-induced local orientation distributions for nucleation of recrystallisation Author(s): Romain Quey, Guo-Hua Fan, Yubin Zhang, Dorte Juul Jensen Published in: Acta Materialia, Issue 210, 2021, Page(s) 116808, ISSN 1359-6454 Publisher: Elsevier BV DOI: 10.1016/j.actamat.2021.116808 Indexing of superimposed Laue diffraction patterns using a dictionary-branch-bound approach Author(s): Seret, A., Gao, W., Jensen, D. J., Godfrey, A. & Zhang, Y. Published in: Journal of Applied Crystallography, 2022, ISSN 1600-5767 Publisher: Journal of Applied Crystallography DOI: 10.1107/s1600576722006021 Cryogenic toughness in a low-cost austenitic steel Author(s): Yuhui Wang, Yubin Zhang, Andrew Godfrey, Jianmei Kang, Yan Peng, Tiansheng Wang, Niels Hansen, Xiaoxu Huang Published in: Communications Materials, Issue 2, 2021, ISSN 2662-4443 Publisher: Nature Portfolio DOI: 10.1038/s43246-021-00149-8 Deep learning for improving non-destructive grain mapping in 3D Author(s): H. Fang, E. Hovad, Y. Zhang, L. K. H. Clemmensen, B. Kjaer Ersbøll, D. Juul Jensen Published in: IUCrJ, Issue 8/5, 2021, Page(s) 719-731, ISSN 2052-2525 Publisher: IUCr Journals DOI: 10.1107/s2052252521005480 Unsupervised Deep Learning for Laboratory-Based Diffraction Contrast Tomography Author(s): Emil Hovad, Haixing Fang, Yubin Zhang, Line Katrine Harder Clemmensen, Bjarne Kjær Ersbøll, Dorte Juul Jensen Published in: Integrating Materials and Manufacturing Innovation, Issue 9/4, 2020, Page(s) 315-321, ISSN 2193-9764 Publisher: SpringerLink DOI: 10.1007/s40192-020-00189-x The effect of voids on boundary migration during recrystallization in additive manufactured samples—a phase field study Author(s): Chunlei Zhang, Vishal Yadav, Nele Moelans, Dorte Juul Jensen, Tianbo Yu Published in: Scripta Materialia, 2022, ISSN 1359-6462 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.scriptamat.2022.114675 Microstructure and strengthening mechanisms of nanolamellar structures in ultrastrong drawn iron wires Author(s): Hanchen Feng, Linfeng Wang, Shiyun Cui, Niels Hansen, Feng Fang, Xiaodan Zhang Published in: Scripta Materialia, Issue 200, 2021, Page(s) 113906, ISSN 1359-6462 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.scriptamat.2021.113906 Relationships between 3D grain structure and local inhomogeneous deformation: A laboratory-based multimodal X-ray tomography investigation Author(s): Kobayashi, M., Zhang, Y., Ishikawa, H., Sun, J., Oddershede, J., Jensen, D. J. & Miura, H. Published in: Acta Materialia, 2022, ISSN 1873-2453 Publisher: Acta Materialia DOI: 10.1016/j.actamat.2022.118357 Dislocation density in fine grain-size spark-plasma sintered aluminum measured using high brightness synchrotron radiation Author(s): C.L. Zhang, A. Godfrey, Y Zhang, G.L. Wu, R. Xu, W. Liu, D. Juul Jensen Published in: Materials Letters, Issue 269, 2020, Page(s) 127653, ISSN 0167-577X Publisher: Elsevier BV DOI: 10.1016/j.matlet.2020.127653 Tuning mechanical behavior and deformation mechanisms in high-manganese steels via carbon content modification Author(s): J Xiong, E Liu, C Zhang, L Kong, H Yang, X Zhang, Y Wang Published in: Materials Science and Engineering A, Issue 881, 2023, ISSN 0921-5093 Publisher: Elsevier BV DOI: 10.1016/j.msea.2023.145401 Microstructure and strength of a tantalum-tungsten alloy after cold rolling from small to large strains Author(s): Guoqiang Ma, Darcy A. Hughes, Andrew W. Godfrey, Qiang Chen, Niels Hansen, Guilin Wu Published in: Journal of Materials Science and Technology, Issue 83, 2021, Page(s) 34-48, ISSN 1005-0302 Publisher: Allerton Press Inc. DOI: 10.1016/j.jmst.2020.12.036 Effects of dislocation boundary spacings and stored energy on boundary migration during recrystallization: A phase-field analysis Author(s): Vishal Yadav, Nele Moelans, Yubin Zhang, Dorte Juul Jensen Published in: Acta Materialia, Issue 221, 2021, Page(s) 117377, ISSN 1359-6454 Publisher: Elsevier BV DOI: 10.1016/j.actamat.2021.117377 Microstructure and rolling contact fatigue behavior of martensitic nodular cast irons with different graphite sizes and densities Author(s): J Bai, Z Cao, H Xu, C Wang, X Chen, W Cao, X Zhang, Y Xu Published in: Fatigue Fracture of Engineering Materials Structures, Issue 46, 2023, Page(s) 2966-2981, ISSN 8756-758X Publisher: Blackwell Publishing Inc. DOI: 10.1111/ffe.14060 Recrystallization kinetics of cold rolled Gum Metal Author(s): Lindkvist, A., Holm Johansen, T., Kørup Pedersen, L., Zhang, Y. & Juul Jensen, D. Published in: IOP Conference Series: Materials Science and Engineering, 2022, ISSN 1757-899X Publisher: IOP Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/1249/1/012022 A flexible and standalone forward simulation model for laboratory X-ray diffraction contrast tomography Author(s): H. Fang, D. Juul Jensen, Y. Zhang Published in: Acta Crystallographica Section A Foundations and Advances, Issue 76/6, 2020, Page(s) 652-663, ISSN 2053-2733 Publisher: John Wiley and Sons Inc. DOI: 10.1107/s2053273320010852 Characterization of Pt-coated twin paraboloidal laboratory capillary high energy x-ray optics Author(s): Seret A, Kehres J, Gundlach C, Olsen UL, Poulsen HF, Juul Jensen D, Cordier M, Stripe B, Yun W, Zhang Y Published in: Optics Express, Issue 13, 2023, Page(s) 38840-38853, ISSN 1094-4087 Publisher: Optical Society of America DOI: 10.1364/oe.499829 3D mapping of residual stresses in growing grains of partially recrystallized Gum Metal Author(s): Adam Lindkvist, Wenjun Liu, Dorte Juul Jensen, Yubin Zhang Published in: Materials Research Letters, Issue 11, 2023, Page(s) 942-948, ISSN 2166-3831 Publisher: Taylor & Francis Open DOI: 10.1080/21663831.2023.2267094 Optimizing laboratory X-ray diffraction contrast tomography for grain structure characterization of pure iron Author(s): Adam Lindkvist, Haixing Fang, Dorte Juul Jensen, Yubin Zhang Published in: Journal of Applied Crystallography, Issue 54/1, 2021, ISSN 1600-5767 Publisher: JOURNAL OF APPLIED CRYSTALLOGRAPHY DOI: 10.1107/s1600576720014673 Multi-axial Fatigue of Head-Hardened Pearlitic and Austenitic Manganese Railway Steels: A Comparative Study Author(s): S. Dhar, J. Ahlström, X. Zhang, H. K. Danielsen, D. Juul Jensen Published in: Metallurgical and Materials Transactions A, Issue 51/11, 2020, Page(s) 5639-5652, ISSN 1073-5623 Publisher: ASM International DOI: 10.1007/s11661-020-05941-8 Investigation of Relationships between Grain Structure and Inhomogeneous Deformation by Means of Laboratory-Based Multimodal X-Ray Tomography: Strain Accuracy Analysis Author(s): M. Kobayashi, Y. Zhang, H. Ishikawa, J. Sun, J. Oddershede, D. Juul Jensen, H. Miura Published in: Experimental Mechanics, 2021, ISSN 0014-4851 Publisher: Sage Science Press DOI: 10.1007/s11340-021-00701-0 In-situ synchrotron X-ray micro-diffraction investigation of ultra-low-strain deformation microstructure in laminated Ti-Al composites Author(s): Tianbo Yu, Yan Du, Guohua Fan, Ruqing Xu, Rozaliya Barabash, Niels Hansen, Xiaoxu Huang, Yubin Zhang Published in: Acta Materialia, Issue 202, 2021, Page(s) 149-158, ISSN 1359-6454 Publisher: Elsevier BV DOI: 10.1016/j.actamat.2020.10.050 Microstructure and strength in ultrastrong cold-drawn medium carbon steel Author(s): Hanchen Feng, Lei Cai, Linfeng Wang, Xiaodan Zhang, Feng Fang Published in: Journal of Materials Science & Technology, 2022, ISSN 1941-1162 Publisher: Elsivier DOI: 10.1016/j.jmst.2021.04.027 Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd Author(s): Xuan Luo, Zongqiang Feng, Tianbo Yu, Junqian Luo, Tianlin Huang, Guilin Wu, Niels Hansen, Xiaoxu Huang Published in: Acta Materialia, Issue 183, 2020, Page(s) 398-407, ISSN 1359-6454 Publisher: Elsevier BV DOI: 10.1016/j.actamat.2019.11.034 Variant selection of primary–secondary extension twin pairs in magnesium: an analytical calculation study Author(s): H. Liu; Fengxiang Lin; Fengxiang Lin; Pei Liu; Yuan Yue; Kwang Seon Shin; Liming Peng; Laurent Delannay; Jian Feng Nie; Nele Moelans Published in: Acta Materialia, Issue 5, 2021, ISSN 1359-6454 Publisher: Elsevier BV DOI: 10.1016/j.actamat.2021.117221 Residual strain–stress in manganese steel railway crossing determined by synchrotron and laboratory X-rays Author(s): Somrita Dhar, Hilmar K. Danielsen, Ruqing Xu, Yubin Zhang, Flemming Bjerg Grumsen, Carsten Rasmussen, Dorte Juul Jensen Published in: Materials Science and Technology, Issue 37/1, 2021, Page(s) 6-13, ISSN 0267-0836 Publisher: Maney Publishing DOI: 10.1080/02670836.2020.1852749 Recovery of deformation microstructure in the bulk interior revealed by synchrotron X-ray micro-diffraction Author(s): Tianbo Yu, Chuanshi Hong, Yubin Zhang, Adam Lindkvist, Wenjun Liu, Jon Tischler, Dorte Juul Jensen Published in: Materials Characterization, Issue 202, 2023, ISSN 1044-5803 Publisher: Elsevier BV DOI: 10.1016/j.matchar.2023.112997 Carburization induced extra-long rolling contact fatigue life of high carbon bearing steel Author(s): Zhaoxi Cao, Tianqi Liu, Feng Yu, Wenquan Cao, Xiaodan Zhang, Yuqing Weng Published in: International Journal of Fatigue, Issue 131, 2020, Page(s) 105351, ISSN 0142-1123 Publisher: Elsevier BV DOI: 10.1016/j.ijfatigue.2019.105351 Evolution of microstructure and mechanical properties during annealing of heavily rolled AlCoCrFeNi2.1 eutectic high-entropy alloy Author(s): Adrianna Lozinko, Reza Gholizadeh, Yubin Zhang, Uta Klement, Nobuhiro Tsuji, Oleg V. Mishin, Sheng Guo Published in: Mater. Sci. Eng., 2022, ISSN 0921-5093 Publisher: Elsevier BV DOI: 10.1016/j.msea.2021.142558 Tailoring the microstructure to enhance the cryogenic mechanical properties of a Fe–34.5Mn–0.04C steel Author(s): Jianchao Xiong, Yuhui Wang*, Yubin Zhang*, Tiansheng Wang, Yan Peng, Andrew Godfrey, Niels Hansen, Xiaoxu Huang Published in: Materials Science and Engineering: A, 2022, ISSN 0921-5093 Publisher: Elsevier BV DOI: 10.1016/j.msea.2022.143769 Heavily cold drawn iron wires: Role of nano-lamellae in enhancing the tensile strength Author(s): Hanchen Feng, Feng Fang, Xuefeng Zhou, Xiaodan Zhang, Zonghan Xie, Jianqing Jiang Published in: Materials Science and Engineering: A, Issue 796, 2020, Page(s) 140017, ISSN 0921-5093 Publisher: Elsevier BV DOI: 10.1016/j.msea.2020.140017 Independent effects of laser power and scanning speed on IN718's precipitation and mechanical properties produced by LBPF plus heat treatment Author(s): Hongjiang Pan, Thomas Dahmen, Mohamad Bayat, Kang Lin, Xiaodan Zhang Published in: Materials Science and Engineering: A, Volume 849, 143530, 2022, ISSN 0921-5093 Publisher: Elsevier BV DOI: 10.1016/j.msea.2022.143530 Improve fatigue and mechanical properties of high carbon bearing steel by a new double vacuum melting route Author(s): Zhiyue Shi, Hui Wang, Yuanhang Gao, Yutong Wang, Feng Yu, Haifeng Xu, Xiaodan Zhang,Chengjia Shang, Wenquan Cao Published in: Fatigue & Fracture of Engineering Materials & Structures, 2022, ISSN 1460-2695 Publisher: Wiley DOI: 10.1111/ffe.13716 Effects of initial 3D printed microstructures on subsequent microstructural evolution in 316L stainless steel Author(s): Chunlei Zhang; Dorte Juul Jensen; Tianbo Yu Published in: Zhang , C , Juul Jensen , D & Yu , T 2023 , ' Effects of initial 3D printed microstructures on subsequent microstructural evolution in 316L stainless steel ' , Acta Materialia , vol. 242 , 118481 . https://doi.org/10.1016/j.actamat.2022.118481, Issue 5, 2023, ISSN 1359-6454 Publisher: Elsevier BV DOI: 10.1016/j.actamat.2022.118481 Impact of 3D/4D methods on the understanding of recrystallization Author(s): D. Juul Jensen, Y.B. Zhang Published in: Current Opinion in Solid State and Materials Science, Issue 24/2, 2020, Page(s) 100821, ISSN 1359-0286 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.cossms.2020.100821 Segregation and precipitation stabilizing an ultrafine lamellar-structured Al-0.3%Cu alloy Author(s): Linfei Shuai, Tianlin Huang, Tianbo Yu, Guilin Wu, Niels Hansen, Xiaoxu Huang Published in: Acta Materialia, Issue 206, 2021, Page(s) 116595, ISSN 1359-6454 Publisher: Elsevier BV DOI: 10.1016/j.actamat.2020.116595 Application of Mask R-CNN for lab-based X-ray diffraction contrast tomography Author(s): H. Fang, E. Hovad, Y. Zhang, D. Juul Jensen Published in: Materials Characterization, Issue 201, 2023, ISSN 1044-5803 Publisher: Elsevier BV DOI: 10.1016/j.matchar.2023.112983 Microstructural characterization of eutectic and near-eutectic AlCoCrFeNi high-entropy alloys Author(s): Adrianna Lozinko, Yubin Zhang, Oleg V. Mishin, Uta Klement, Sheng Guo Published in: Journal of Alloys and Compounds, Issue 822, 2020, Page(s) 153558, ISSN 0925-8388 Publisher: Elsevier BV DOI: 10.1016/j.jallcom.2019.153558 Heterogeneous lamellar-structured high manganese steel with excellent tensile properties Author(s): JC Xiong, JF Zhao, L Kong, HK Yang, XD Zhang, YH Wang Published in: IOP Conference Series: Materials Science and Engineering, 2022, ISSN 1757-899X Publisher: IOP Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/1249/1/012036 Microstructure and Texture Evolution During Cold Rolling of 316L Stainless Steel Author(s): Chunlei Zhang, Dorte Juul Jensen, Tianbo Yu Published in: Metallurgical and Materials Transactions A, Issue 52/9, 2021, Page(s) 4100-4111, ISSN 1073-5623 Publisher: ASM International DOI: 10.1007/s11661-021-06367-6 In Situ Synchrotron X-ray Micro-Diffraction Investigation of Elastic Strains in Laminated Ti-Al Composites Author(s): Tianbo Yu, Yan Du, Guohua Fan, Rozaliya Barabash, Dorte Juul Jensen, Yubin Zhang Published in: Metals, Issue 11/4, 2021, Page(s) 668, ISSN 2075-4701 Publisher: Metals DOI: 10.3390/met11040668 Effect of inclusion type on the rotating bending fatigue properties of a high carbon chromium bearing steel Author(s): Z Shi, W Cao, C Shang, X Zhang Published in: IOP Conference Series: Materials Science and Engineering, 2022, ISSN 1757-899X Publisher: IOP Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/1249/1/012032 Visualization of low-misorientation dislocation structures from orientation data using customized All-Euler maps Author(s): Chuanshi Hong Published in: IOP Conference Series: Materials Science and Engineering, Issue 580, 2019, Page(s) 012033, ISSN 1757-899X Publisher: IOP Publishing Ltd DOI: 10.1088/1757-899x/580/1/012033 Grain boundary wetting correlated to the grain boundary properties: A laboratory-based multimodal X-ray tomography investigation Author(s): J. Sun, Y. Zhang, A. Lyckegaard, F. Bachmann, E.M. Lauridsen, D. Juul Jensen Published in: Scripta Materialia, Issue 163, 2019, Page(s) 77-81, ISSN 1359-6462 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.scriptamat.2019.01.007 Aging of 3D-printed maraging steel Author(s): E G Thorsteinsdóttir, D S Primdahl, Y B Zhang, D Juul Jensen, T Yu Published in: IOP Conference Series: Materials Science and Engineering, Issue 580, 2019, Page(s) 012047, ISSN 1757-899X Publisher: I O P Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/580/1/012047 Alignment of sample position and rotation during in situ synchrotron X-ray micro-diffraction experiments using a Laue cross-correlation approach Author(s): Chenglu Zhang, Yubin Zhang, Guilin Wu, Wenjun Liu, Ruqing Xu, Dorte Juul Jensen, Andrew Godfrey Published in: Journal of Applied Crystallography, Issue 52/5, 2019, Page(s) 1119-1127, ISSN 1600-5767 Publisher: JOURNAL OF APPLIED CRYSTALLOGRAPHY DOI: 10.1107/s1600576719010562 An efficient method to improve the spatial resolution of laboratory X-ray diffraction contrast tomography Author(s): H Fang, D Juul Jensen, Y Zhang Published in: IOP Conference Series: Materials Science and Engineering, Issue 580, 2019, Page(s) 012030, ISSN 1757-899X Publisher: I O P Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/580/1/012030 Investigation of plastic yielding in near-micrometer grain size aluminum using synchrotron microdiffraction Author(s): C.L. Zhang, A Godfrey, W.Q. Gao, Y.B. Zhang, G.L. Wu, W. Liu, R.Q. Xu, D. Juul Jensen Published in: IOP Conference Series: Materials Science and Engineering, Issue 580, 2019, Page(s) 012056, ISSN 1757-899X Publisher: I O P Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/580/1/012056 Quantification of recrystallization kinetics in industrially processed 5xxx aluminum alloy sheet Author(s): X C Lei, R E Sanders, X F Yang, D Juul Jensen Published in: IOP Conference Series: Materials Science and Engineering, Issue 580, 2019, Page(s) 012037, ISSN 1757-899X Publisher: I O P Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/580/1/012037 Integral mean curvature analysis of 3D grain growth: Linearity of dV/dt and grain volume Author(s): BR Patterson, RT DeHoff, CA Sahi, J Sun, J Oddershede, F Bachmann, E Lauridsen, D Juul Jensen Published in: IOP Conference Series: Materials Science and Engineering, Issue 580, 2019, Page(s) 012020, ISSN 1757-899X Publisher: I O P Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/580/1/012020 Pt-20Rh dispersion strengthened by ZrO2 - Microstructure and strength Author(s): Faping Hu, Tianbo Yu, Weiting Liu, Yan Yang, Guobing Wei, Xuan Luo, Huiyi Tang, Niels Hansen, Xiaoxu Huang, Weidong Xie Published in: Materials Science and Engineering: A, Issue 765, 2019, Page(s) 138305, ISSN 0921-5093 Publisher: Elsevier BV DOI: 10.1016/j.msea.2019.138305 Grain size effect on deformation mechanisms in Mg-3Gd Author(s): X Luo, J Q Luo, Z Q Feng, F P Hu, T Yu, C Berggreen, G L Wu, N Hansen, X Huang Published in: IOP Conference Series: Materials Science and Engineering, Issue 580, 2019, Page(s) 012040, ISSN 1757-899X Publisher: IOP Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/580/1/012040 A unified model for microstructural coarsening of deformed metals Author(s): T Yu Published in: IOP Conference Series: Materials Science and Engineering, Issue 580, 2019, Page(s) 012054, ISSN 1757-899X Publisher: IOP Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/580/1/012054 Quantification of microstructure in a eutectic high entropy alloy AlCoCrFeNi 2.1 Author(s): Adrianna Lozinko, Oleg V. Mishin, Tianbo Yu, Uta Klement, Sheng Guo, Yubin Zhang Published in: IOP Conference Series: Materials Science and Engineering, Issue 580, 2019, Page(s) 012039, ISSN 1757-899X Publisher: IOP Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/580/1/012039 Recovery kinetics in Al-0.3%Cu after heavy rolling Author(s): L F Shuai, T L Huang, G L Wu, N Hansen, X Huang, T Yu Published in: IOP Conference Series: Materials Science and Engineering, Issue 580, 2019, Page(s) 012044, ISSN 1757-899X Publisher: IOP Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/580/1/012044 Microstructure and strength of weldment in Pt20Rh alloys dispersion-strengthened by ZrO 2 particles Author(s): Faping Hu, Ziyang Wang, Tianbo Yu, Zonglun Yang, Guobing Wei, Xuan Luo, Niels Hansen, Xiaoxu Huang, Weidong Xie Published in: IOP Conference Series: Materials Science and Engineering, Issue 580, 2019, Page(s) 012035, ISSN 1757-899X Publisher: IOP Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/580/1/012035 Strong pinning of triple junction migration for robust high strain nanostructures Author(s): Tianbo Yu, Darcy A. Hughes Published in: Philosophical Magazine, Issue 99/7, 2019, Page(s) 869-886, ISSN 1478-6435 Publisher: Taylor & Francis DOI: 10.1080/14786435.2018.1562282 Comparison of local stress and strain in a heterogeneouslycompressed AA 1050 ring by electron microscopy, microhardness and finite element modelling Author(s): C V Nielsen, N Hansen, X Zhang Published in: IOP Conference Series: Materials Science and Engineering, Issue 580, 2019, Page(s) 012042, ISSN 1757-899X Publisher: IOP Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/580/1/012042 Effect of strain gradient on the microstructure and mechanical properties of pearlitic steel Author(s): Johan Ahlström, Xiaodan Zhang Published in: IOP Conference Series: Materials Science and Engineering, Issue 580, 2019, Page(s) 012027, ISSN 1757-899X Publisher: IOP Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/580/1/012027 Exploring high strength metallic materials: a lesson from pearlitic steel wire Author(s): X Zhang Published in: IOP Conference Series: Materials Science and Engineering, Issue 580, 2019, Page(s) 012058, ISSN 1757-899X Publisher: IOP Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/580/1/012058 Quantification of local boundary migration in 2D/3D Author(s): Yubin Zhang Published in: IOP Conference Series: Materials Science and Engineering, Issue 580, 2019, Page(s) 012015, ISSN 1757-899X Publisher: I O P Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/580/1/012015 Subgrain dynamics during recovery of partly recrystallized aluminum Author(s): S.R. Ahl, H. Simons, C. Detlefs, D. Juul Jensen, H.F. Poulsen Published in: Acta Materialia, Issue 185, 2020, Page(s) 142-148, ISSN 1359-6454 Publisher: Elsevier BV DOI: 10.1016/j.actamat.2019.10.042 Influence Mechanisms of Inclusion Types on Rotating Bending Fatigue Properties of SAE52100 Bearing Steel Author(s): Z Shi, J Li, X Zhang, C Shang, W Cao Published in: Materials 15, 2022, ISSN 1996-1944 Publisher: MDPI Open Access Publishing DOI: 10.3390/ma15145037 Nucleation of rebrystallization Author(s): Elisabeth Filippa Ferdinand Knipschildt Published in: Crossref, Issue 38, 2022, Page(s) 765-779, ISSN 0267-0836 Publisher: Maney Publishing DOI: 10.1080/02670836.2022.2065054 Quantitative Comparison of the Recrystallization Kinetics of Two Industrially Processed 5xxx Aluminum Alloys Author(s): Xiuchuan Lei, Robert Edward Sanders, Xiaofang Yang, Fengxiang Lin, Dorte Juul Jensen Published in: Metallurgical and Materials Transactions A, Issue 52/11, 2021, Page(s) 4827-4840, ISSN 1073-5623 Publisher: ASM International DOI: 10.1007/s11661-021-06427-x A CPFEM based theoretical analysis of strains resolved by the microstructural feature tracking method Author(s): R. Li, R. Quey, Y. Zhang, M. Kobayashi, J. Oddershede, D. Jul Jensen Published in: IOP Publishing Ltd, 2022, ISSN 1757-899X Publisher: IOP Publishing Ltd DOI: 10.1088/1757-899x/1249/1/012056 Interactions between Dislocations and Boundaries during Deformation Author(s): Hongjiang Pan, Yue He, Xiaodan Zhang Published in: Materials, Issue 14/4, 2021, Page(s) 1012, ISSN 1996-1944 Publisher: MDPI Open Access Publishing DOI: 10.3390/ma14041012 Local residual stresses and microstructure within recrystallizing grains in iron Author(s): Yubin Zhang*, Tianbo Yu, Ruqing Xu, Jesper Thorborg, Wenjun Liu, Jon Tischler, Andy Godfrey, Dorte Juul Jensen Published in: Materials Characterization, 2022, ISSN 1044-5803 Publisher: Elsevier BV DOI: 10.1016/j.matchar.2022.112113 Microstructure Evolution and Tensile Properties of Cold-Rolled and Annealed Fe-30Mn-0.14C-7Cr-0.26Ni Steel Author(s): Xiaoman Chen, Jiaxin Zhang, Jianchao Xiong, Yuhui Wang, Yubin Zhang, Tiansheng Wang, Yan Peng Published in: Metallurgical and Materials Transactions A, Issue 52/9, 2021, Page(s) 3839-3848, ISSN 1073-5623 Publisher: ASM International DOI: 10.1007/s11661-021-06345-y """Effect of Aging Treatment on the Microstructureand Mechanical Properties of Fe-Mn-Al-C Low Density Steel""" Author(s): GY Li, L Kong, EZ Liu, XD Zhang, WQ Cao, YH Wang Published in: IOP Conference Series: Materials Science and Engineering, 2022, ISSN 1757-899X Publisher: IOP Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/1249/1/012053 Effect of tempering temperature on the wear behaviour of martensitic ductile iron Author(s): Jiaojiao Bai; Haifeng Xu; Xingpin Chen; Wenquan Cao; Xiaodan Zhang; Yang Xu Published in: https://www.tandfonline.com/doi/full/10.1080/02670836.2022.2139008, 2023, ISSN 0267-0836 Publisher: Maney Publishing DOI: 10.1080/02670836.2022.2139008 Surface patterning for combined digital image correlation and electron backscatter diffraction in-situ deformation experiments Author(s): Shiqi Zhang, Andrew Godfrey, Chenglu Zhang, Wei Liu, Dorte Juul Jensen Published in: Materials Characterization, Issue 164, 2020, Page(s) 110332, ISSN 1044-5803 Publisher: Elsevier BV DOI: 10.1016/j.matchar.2020.110332 Unusual through-thickness variations of microstructure and texture in heavily rolled and annealed Al–0.3%Cu Author(s): L.F. Shuai, T.L. Huang, G.L. Wu, G. Winther, X. Huang, O.V. Mishin Published in: Materials Characterization, Issue 162, 2020, Page(s) 110173, ISSN 1044-5803 Publisher: Elsevier BV DOI: 10.1016/j.matchar.2020.110173 Finite element modelling of indentation testing in an AA1050 microstructure Author(s): S Goutianos, H Pan, X Zhang Published in: IOP Conference Series: Materials Science and Engineering, 2022, ISSN 1757-899X Publisher: IOP Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/1249/1/012031 Dislocation Mechanisms and Local Strength with a View towards Sleeper Screw Failures Author(s): Kang Lin, Lichu Zhou, Dorte Juul Jensen, Xiaodan Zhang Published in: Crystals, 2023, ISSN 2073-4352 Publisher: Multidisciplinary Digital Publishing Institute (MDPI) DOI: 10.3390/cryst13040656 Strain distribution and lattice rotations during in-situ tension of aluminum with a transmodal grain structure Author(s): W.Q. Gao, C.L. Zhang, M.X. Yang, S.Q. Zhang, D. Juul Jensen, A. Godfrey Published in: Materials Science and Engineering: A, Issue 828, 2021, Page(s) 142010, ISSN 0921-5093 Publisher: Elsevier BV DOI: 10.1016/j.msea.2021.142010 Improved grain mapping by laboratory X-ray diffraction contrast tomography Author(s): H. Fang, D. Juul Jensen, Y. Zhang Published in: IUCrJ, Issue 8/4, 2021, Page(s) 559-573, ISSN 2052-2525 Publisher: IUCr Journals DOI: 10.1107/s2052252521003730 Quantification of room temperature strengthening of laser shock peened Ni-based superalloy using synchrotron microdiffraction Author(s): Guangni Zhou, Yubin Zhang*, Wolfgang Pantleon, Jiawei Kou, Upadrasta Ramamurty, Xipeng Tan, Sihai Luo, Weifeng He, Ching-Shun Ku, Ching-Yu Chiang, Nobumichi Tamura, Kai Chen Published in: Materials & Design, 2022, ISSN 0264-1275 Publisher: Elsevier BV DOI: 10.1016/j.matdes.2022.110948 Melting route effects on the rotatory bending fatigue and rolling contact fatigue properties of high carbon bearing steel SAE52100 Author(s): Zhaoxi Cao, Zhiyue Shi, Bo Liang, Xiaodan Zhang, Wenquan Cao, Yuqing Weng Published in: International Journal of Fatigue, Issue 140, 2020, Page(s) 105854, ISSN 0142-1123 Publisher: Elsevier BV DOI: 10.1016/j.ijfatigue.2020.105854 Influence of geometrical alignment of the deformation microstructure on local migration of grain boundaries during recrystallization: A phase-field study Author(s): Vishal Yadav, Nele Moelans, Yubin Zhang, Dorte Juul Jensen Published in: Scripta Materialia, Issue 191, 2021, Page(s) 116-119, ISSN 1359-6462 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.scriptamat.2020.09.028 Enhanced strength in pure Ti via design of alternating coarse- and fine-grain layers Author(s): Danyang Li, Guohua Fan, Xiaoxu Huang, Dorte Juul Jensen, Kesong Miao, Chao Xu, Lin Geng, Yubin Zhang, Tianbo Yu Published in: Acta Materialia, Issue 206, 2021, Page(s) 116627, ISSN 1359-6454 Publisher: Elsevier BV DOI: 10.1016/j.actamat.2021.116627 3D mapping of orientation variation and local residual stress within individual grains of pearlitic steel using synchrotron dark field X-ray microscopy Author(s): C. Yildirim, C. Jessop, J. Ahlström, C. Detlefs, Y. Zhang Published in: Scripta Materialia, Issue 197, 2021, Page(s) 113783, ISSN 1359-6462 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.scriptamat.2021.113783 Tensile deformation-induced twinning in an austenitic low density steel over a wide range of temperature Author(s): Wang, H., Liang, J., Shi, Z., Wang, C., Zhang, X. & Cao, W Published in: IOP Conference Series: Materials Science and Engineering, 2022, ISSN 1757-899X Publisher: IOP Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/1249/1/012011 Twinning during recrystallization and its correlation with the deformation microstructure Author(s): Lin, F., Zhang, Y., Godfrey, A., Jensen, D. J. Published in: Scripta Materialia, 2022, ISSN 1359-6462 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.scriptamat.2022.114852 A phase-field investigation of recrystallization boundary migration into heterogeneous deformation energy fields: Effects of dislocation boundary sharpness Author(s): R Li, V Yadav, N Moelans, Y Zhang, D Juul Jensen Published in: IOP Conference Series: Materials Science and Engineering, Issue 1121/1, 2021, Page(s) 012013, ISSN 1757-8981 Publisher: I O P Conference Series: Materials Science and Engineering DOI: 10.1088/1757-899x/1121/1/012013 Microstructure and strengthening mechanisms of 90W–7Ni–3Fe alloys prepared using laser melting deposition Author(s): Y.P. Wang, S.Y. Ma, X.S. Yang, Y.Z. Zhou, X. Liu, J.F. Li, J.J. Zhang, C. Li, X.Y. Wang, G.M. Le, Y. Zhang Published in: Journal of Alloys and Compounds, Issue 838, 2020, Page(s) 155545, ISSN 0925-8388 Publisher: Elsevier BV DOI: 10.1016/j.jallcom.2020.155545 An experimentally-based molecular dynamics analysis of grain boundary migration during recrystallization in aluminum Author(s): R. Li, E.R. Homer, C. Hong, Y. Zhang, D. Juul Jensen, Published in: Scripta Materialia, 2022, ISSN 1872-8456 Publisher: Scripta Materialia DOI: 10.1016/j.scriptamat.2021.114489 Book chapters (2) Analysis of Sleeper Screw Failures Author(s): Xiaodan Zhang, Yubin Zhang, Carsten Jørn Rasmussen, Martin Tandrup Lange, Dorte Juul Jensen Published in: Intelligent Quality Assessment of Railway Switches and Crossings, 2021, Page(s) 93-105, ISBN 978-3-030-62471-2 Publisher: Springer International Publishing DOI: 10.1007/978-3-030-62472-9_6 Deformation Microstructure and Recovery Author(s): Tianbo Yu Published in: 2020 Publisher: Nova Science Publishers Searching for OpenAIRE data... There was an error trying to search data from OpenAIRE No results available