Metal Microstructures in Four Dimensions

Livrables

Complete data management plan formulated.

Publications

Influence of shielding gas flow on the uniformity of additively manufactured martensitic stainless steel

Auteurs: Z Pan, V K Nadimpalli, T L Christiansen, S A Andersen, M B Kjer, O V Mishin and Y Zhang
Publié dans: 2022
Éditeur: I O P Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/1249/1/012026

Texture in cold rolled and high-temperature annealed Cu foils

Auteurs: J. Guo, X. Li, G. L. Wu, R. Q. Zhang, T. L. Huang, H. F. Shi, C. L. Zhang, D. Juul Jensen, X. Huang
Publié dans: 2022
Éditeur: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1249/1/012052

Deformation Mechanisms in Tool–Workpiece Asperity Contact in Metal Forming

Auteurs: Chris Valentin Nielsen, Xiaodan Zhang, Marcel Moghadam, Niels Hansen, Niels Bay
Publié dans: The Minerals, Metals & Materials Series, Forming the Future, 2021, Page(s) 127-137, ISBN 978-3-030-75381-8
Éditeur: Springer Link
DOI: 10.1007/978-3-030-75381-8_10

In-situ X-ray microtomography of interface between additively manufactured aluminium bronze and H13 tool steel

Auteurs: Håkon Linga, Yubin Zhang, Vegard Brøtan, Xiaobo Ren, Ida Westermann and Bjørn Holmedal
Publié dans: 2022
Éditeur: I O P Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/1249/1/012042

Stored energy calculation in AA 1050 based on deformation microstructure from electron backscatter diffraction data

Auteurs: Y. Han, H. Pan, A. Godfrey, D. Juul Jensen, X. Zhang
Publié dans: 2022
Éditeur: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1249/1/012064

Effects of alloying, microstructure and texture on the strength–ductility trade-off in layered aluminum

Auteurs: Y. P. Xia, H. Wu, K. S. Miao, L. Geng, G. H. Fan, T. Yu, D. Juul Jensen
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 1249, 2022
Éditeur: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1249/1/012037

Registration of data from a multimodal investigation of particle stimulated nucleation in aluminum

Auteurs: E. F. F. Knipschildt, X. Lei, Y. B. Zhang, T. Yu, S. Fæster, W. Liu, R. E. Sanders, D. Juul Jensen
Publié dans: IOP Conference Series: Materials Science and Engineering, 2022
Éditeur: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1249/1/012049

Recovery of small prientation gradients in a ercystallized grain observed in 3D during ex-situ annealing

Auteurs: C. Hong, Y. Zhang, T. Yu, W. Liu, D. Juul Jensen
Publié dans: IOP Conference Series: Materials Science and Engineering, 2022
Éditeur: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1249/1/012050

Effect of annealing on microstructure in railway wheel steel

Auteurs: Dimitrios Nikas, Yubin Zhang and Johan Ahlström
Publié dans: 2022
Éditeur: I O P Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/1249/1/012059

Recrystallization kinetics of the AA5xxx series aluminum alloys - revisited

Auteurs: R. Vandermeer, F. Lin, X. Lei, R. E. Sanders, D. Juul Jensen
Publié dans: 2022
Éditeur: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1249/1/012060

Microstructural evolution during recovery of deformed aluminium—Effect of deformation strain

Auteurs: Tianbo Yu
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 1249, 2022
Éditeur: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/1249/1/012001

Enhancement of an additive-manufactured austenitic stainless steel by post-manufacture heat-treatment

Auteurs: Nan Chen, Guoqiang Ma, Wanquan Zhu, Andrew Godfrey, Zhijian Shen, Guilin Wu, Xiaoxu Huang
Publié dans: Materials Science and Engineering: A, Numéro 759, 2019, Page(s) 65-69, ISSN 0921-5093
Éditeur: Elsevier BV
DOI: 10.1016/j.msea.2019.04.111

Particle stimulated nucleation revisited in three dimensions: a laboratory-based multimodal X-ray tomography investigation

Auteurs: Robert E. Sanders; Florian Bachmann; Yubin Zhang; Jun Sun; Xiaofang Yang; Dorte Juul Jensen; Xiuchuan Lei
Publié dans: Materials Research Letters, Vol 9, Iss 1, Pp 65-70 (2021), Numéro 9/1, 2021, Page(s) 65-70, ISSN 2166-3831
Éditeur: Materials Research Letters
DOI: 10.1080/21663831.2020.1822455

Recrystallization boundary migration in the 3D heterogeneous microstructure near a hardness indent

Auteurs: Chuanshi Hong, Yubin Zhang, Adam Lindkvist, Wenjun Liu, Jon Tischler, Ruqing Xu, Dorte Juul Jensen
Publié dans: Scripta Materialia, Numéro 205, 2021, Page(s) 114187, ISSN 1359-6462
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2021.114187

Importance of deformation-induced local orientation distributions for nucleation of recrystallisation

Auteurs: Romain Quey, Guo-Hua Fan, Yubin Zhang, Dorte Juul Jensen
Publié dans: Acta Materialia, Numéro 210, 2021, Page(s) 116808, ISSN 1359-6454
Éditeur: Elsevier BV
DOI: 10.1016/j.actamat.2021.116808

Indexing of superimposed Laue diffraction patterns using a dictionary-branch-bound approach

Auteurs: Seret, A., Gao, W., Jensen, D. J., Godfrey, A. & Zhang, Y.
Publié dans: Journal of Applied Crystallography, 2022, ISSN 1600-5767
Éditeur: Journal of Applied Crystallography
DOI: 10.1107/s1600576722006021

Cryogenic toughness in a low-cost austenitic steel

Auteurs: Yuhui Wang, Yubin Zhang, Andrew Godfrey, Jianmei Kang, Yan Peng, Tiansheng Wang, Niels Hansen, Xiaoxu Huang
Publié dans: Communications Materials, Numéro 2, 2021, ISSN 2662-4443
Éditeur: Nature Portfolio
DOI: 10.1038/s43246-021-00149-8

Deep learning for improving non-destructive grain mapping in 3D

Auteurs: H. Fang, E. Hovad, Y. Zhang, L. K. H. Clemmensen, B. Kjaer Ersbøll, D. Juul Jensen
Publié dans: IUCrJ, Numéro 8/5, 2021, Page(s) 719-731, ISSN 2052-2525
Éditeur: IUCr Journals
DOI: 10.1107/s2052252521005480

Unsupervised Deep Learning for Laboratory-Based Diffraction Contrast Tomography

Auteurs: Emil Hovad, Haixing Fang, Yubin Zhang, Line Katrine Harder Clemmensen, Bjarne Kjær Ersbøll, Dorte Juul Jensen
Publié dans: Integrating Materials and Manufacturing Innovation, Numéro 9/4, 2020, Page(s) 315-321, ISSN 2193-9764
Éditeur: SpringerLink
DOI: 10.1007/s40192-020-00189-x

The effect of voids on boundary migration during recrystallization in additive manufactured samples—a phase field study

Auteurs: Chunlei Zhang, Vishal Yadav, Nele Moelans, Dorte Juul Jensen, Tianbo Yu
Publié dans: Scripta Materialia, 2022, ISSN 1359-6462
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2022.114675

Microstructure and strengthening mechanisms of nanolamellar structures in ultrastrong drawn iron wires

Auteurs: Hanchen Feng, Linfeng Wang, Shiyun Cui, Niels Hansen, Feng Fang, Xiaodan Zhang
Publié dans: Scripta Materialia, Numéro 200, 2021, Page(s) 113906, ISSN 1359-6462
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2021.113906

Relationships between 3D grain structure and local inhomogeneous deformation: A laboratory-based multimodal X-ray tomography investigation

Auteurs: Kobayashi, M., Zhang, Y., Ishikawa, H., Sun, J., Oddershede, J., Jensen, D. J. & Miura, H.
Publié dans: Acta Materialia, 2022, ISSN 1873-2453
Éditeur: Acta Materialia
DOI: 10.1016/j.actamat.2022.118357

Dislocation density in fine grain-size spark-plasma sintered aluminum measured using high brightness synchrotron radiation

Auteurs: C.L. Zhang, A. Godfrey, Y Zhang, G.L. Wu, R. Xu, W. Liu, D. Juul Jensen
Publié dans: Materials Letters, Numéro 269, 2020, Page(s) 127653, ISSN 0167-577X
Éditeur: Elsevier BV
DOI: 10.1016/j.matlet.2020.127653

Tuning mechanical behavior and deformation mechanisms in high-manganese steels via carbon content modification

Auteurs: J Xiong, E Liu, C Zhang, L Kong, H Yang, X Zhang, Y Wang
Publié dans: Materials Science and Engineering A, Numéro 881, 2023, ISSN 0921-5093
Éditeur: Elsevier BV
DOI: 10.1016/j.msea.2023.145401

Microstructure and strength of a tantalum-tungsten alloy after cold rolling from small to large strains

Auteurs: Guoqiang Ma, Darcy A. Hughes, Andrew W. Godfrey, Qiang Chen, Niels Hansen, Guilin Wu
Publié dans: Journal of Materials Science and Technology, Numéro 83, 2021, Page(s) 34-48, ISSN 1005-0302
Éditeur: Allerton Press Inc.
DOI: 10.1016/j.jmst.2020.12.036

Effects of dislocation boundary spacings and stored energy on boundary migration during recrystallization: A phase-field analysis

Auteurs: Vishal Yadav, Nele Moelans, Yubin Zhang, Dorte Juul Jensen
Publié dans: Acta Materialia, Numéro 221, 2021, Page(s) 117377, ISSN 1359-6454
Éditeur: Elsevier BV
DOI: 10.1016/j.actamat.2021.117377

Microstructure and rolling contact fatigue behavior of martensitic nodular cast irons with different graphite sizes and densities

Auteurs: J Bai, Z Cao, H Xu, C Wang, X Chen, W Cao, X Zhang, Y Xu
Publié dans: Fatigue Fracture of Engineering Materials Structures, Numéro 46, 2023, Page(s) 2966-2981, ISSN 8756-758X
Éditeur: Blackwell Publishing Inc.
DOI: 10.1111/ffe.14060

Recrystallization kinetics of cold rolled Gum Metal

Auteurs: Lindkvist, A., Holm Johansen, T., Kørup Pedersen, L., Zhang, Y. & Juul Jensen, D.
Publié dans: IOP Conference Series: Materials Science and Engineering, 2022, ISSN 1757-899X
Éditeur: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/1249/1/012022

A flexible and standalone forward simulation model for laboratory X-ray diffraction contrast tomography

Auteurs: H. Fang, D. Juul Jensen, Y. Zhang
Publié dans: Acta Crystallographica Section A Foundations and Advances, Numéro 76/6, 2020, Page(s) 652-663, ISSN 2053-2733
Éditeur: John Wiley and Sons Inc.
DOI: 10.1107/s2053273320010852

Characterization of Pt-coated twin paraboloidal laboratory capillary high energy x-ray optics

Auteurs: Seret A, Kehres J, Gundlach C, Olsen UL, Poulsen HF, Juul Jensen D, Cordier M, Stripe B, Yun W, Zhang Y
Publié dans: Optics Express, Numéro 13, 2023, Page(s) 38840-38853, ISSN 1094-4087
Éditeur: Optical Society of America
DOI: 10.1364/oe.499829

3D mapping of residual stresses in growing grains of partially recrystallized Gum Metal

Auteurs: Adam Lindkvist, Wenjun Liu, Dorte Juul Jensen, Yubin Zhang
Publié dans: Materials Research Letters, Numéro 11, 2023, Page(s) 942-948, ISSN 2166-3831
Éditeur: Taylor & Francis Open
DOI: 10.1080/21663831.2023.2267094

Optimizing laboratory X-ray diffraction contrast tomography for grain structure characterization of pure iron

Auteurs: Adam Lindkvist, Haixing Fang, Dorte Juul Jensen, Yubin Zhang
Publié dans: Journal of Applied Crystallography, Numéro 54/1, 2021, ISSN 1600-5767
Éditeur: JOURNAL OF APPLIED CRYSTALLOGRAPHY
DOI: 10.1107/s1600576720014673

Multi-axial Fatigue of Head-Hardened Pearlitic and Austenitic Manganese Railway Steels: A Comparative Study

Auteurs: S. Dhar, J. Ahlström, X. Zhang, H. K. Danielsen, D. Juul Jensen
Publié dans: Metallurgical and Materials Transactions A, Numéro 51/11, 2020, Page(s) 5639-5652, ISSN 1073-5623
Éditeur: ASM International
DOI: 10.1007/s11661-020-05941-8

Investigation of Relationships between Grain Structure and Inhomogeneous Deformation by Means of Laboratory-Based Multimodal X-Ray Tomography: Strain Accuracy Analysis

Auteurs: M. Kobayashi, Y. Zhang, H. Ishikawa, J. Sun, J. Oddershede, D. Juul Jensen, H. Miura
Publié dans: Experimental Mechanics, 2021, ISSN 0014-4851
Éditeur: Sage Science Press
DOI: 10.1007/s11340-021-00701-0

In-situ synchrotron X-ray micro-diffraction investigation of ultra-low-strain deformation microstructure in laminated Ti-Al composites

Auteurs: Tianbo Yu, Yan Du, Guohua Fan, Ruqing Xu, Rozaliya Barabash, Niels Hansen, Xiaoxu Huang, Yubin Zhang
Publié dans: Acta Materialia, Numéro 202, 2021, Page(s) 149-158, ISSN 1359-6454
Éditeur: Elsevier BV
DOI: 10.1016/j.actamat.2020.10.050

Microstructure and strength in ultrastrong cold-drawn medium carbon steel

Auteurs: Hanchen Feng, Lei Cai, Linfeng Wang, Xiaodan Zhang, Feng Fang
Publié dans: Journal of Materials Science & Technology, 2022, ISSN 1941-1162
Éditeur: Elsivier
DOI: 10.1016/j.jmst.2021.04.027

Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd

Auteurs: Xuan Luo, Zongqiang Feng, Tianbo Yu, Junqian Luo, Tianlin Huang, Guilin Wu, Niels Hansen, Xiaoxu Huang
Publié dans: Acta Materialia, Numéro 183, 2020, Page(s) 398-407, ISSN 1359-6454
Éditeur: Elsevier BV
DOI: 10.1016/j.actamat.2019.11.034

Variant selection of primary–secondary extension twin pairs in magnesium: an analytical calculation study

Auteurs: H. Liu; Fengxiang Lin; Fengxiang Lin; Pei Liu; Yuan Yue; Kwang Seon Shin; Liming Peng; Laurent Delannay; Jian Feng Nie; Nele Moelans
Publié dans: Acta Materialia, Numéro 5, 2021, ISSN 1359-6454
Éditeur: Elsevier BV
DOI: 10.1016/j.actamat.2021.117221

Residual strain–stress in manganese steel railway crossing determined by synchrotron and laboratory X-rays

Auteurs: Somrita Dhar, Hilmar K. Danielsen, Ruqing Xu, Yubin Zhang, Flemming Bjerg Grumsen, Carsten Rasmussen, Dorte Juul Jensen
Publié dans: Materials Science and Technology, Numéro 37/1, 2021, Page(s) 6-13, ISSN 0267-0836
Éditeur: Maney Publishing
DOI: 10.1080/02670836.2020.1852749

Recovery of deformation microstructure in the bulk interior revealed by synchrotron X-ray micro-diffraction

Auteurs: Tianbo Yu, Chuanshi Hong, Yubin Zhang, Adam Lindkvist, Wenjun Liu, Jon Tischler, Dorte Juul Jensen
Publié dans: Materials Characterization, Numéro 202, 2023, ISSN 1044-5803
Éditeur: Elsevier BV
DOI: 10.1016/j.matchar.2023.112997

Carburization induced extra-long rolling contact fatigue life of high carbon bearing steel

Auteurs: Zhaoxi Cao, Tianqi Liu, Feng Yu, Wenquan Cao, Xiaodan Zhang, Yuqing Weng
Publié dans: International Journal of Fatigue, Numéro 131, 2020, Page(s) 105351, ISSN 0142-1123
Éditeur: Elsevier BV
DOI: 10.1016/j.ijfatigue.2019.105351

Evolution of microstructure and mechanical properties during annealing of heavily rolled AlCoCrFeNi2.1 eutectic high-entropy alloy

Auteurs: Adrianna Lozinko, Reza Gholizadeh, Yubin Zhang, Uta Klement, Nobuhiro Tsuji, Oleg V. Mishin, Sheng Guo
Publié dans: Mater. Sci. Eng., 2022, ISSN 0921-5093
Éditeur: Elsevier BV
DOI: 10.1016/j.msea.2021.142558

Tailoring the microstructure to enhance the cryogenic mechanical properties of a Fe–34.5Mn–0.04C steel

Auteurs: Jianchao Xiong, Yuhui Wang*, Yubin Zhang*, Tiansheng Wang, Yan Peng, Andrew Godfrey, Niels Hansen, Xiaoxu Huang
Publié dans: Materials Science and Engineering: A, 2022, ISSN 0921-5093
Éditeur: Elsevier BV
DOI: 10.1016/j.msea.2022.143769

Heavily cold drawn iron wires: Role of nano-lamellae in enhancing the tensile strength

Auteurs: Hanchen Feng, Feng Fang, Xuefeng Zhou, Xiaodan Zhang, Zonghan Xie, Jianqing Jiang
Publié dans: Materials Science and Engineering: A, Numéro 796, 2020, Page(s) 140017, ISSN 0921-5093
Éditeur: Elsevier BV
DOI: 10.1016/j.msea.2020.140017

Independent effects of laser power and scanning speed on IN718's precipitation and mechanical properties produced by LBPF plus heat treatment

Auteurs: Hongjiang Pan, Thomas Dahmen, Mohamad Bayat, Kang Lin, Xiaodan Zhang
Publié dans: Materials Science and Engineering: A, Volume 849, 143530, 2022, ISSN 0921-5093
Éditeur: Elsevier BV
DOI: 10.1016/j.msea.2022.143530

Improve fatigue and mechanical properties of high carbon bearing steel by a new double vacuum melting route

Auteurs: Zhiyue Shi, Hui Wang, Yuanhang Gao, Yutong Wang, Feng Yu, Haifeng Xu, Xiaodan Zhang,Chengjia Shang, Wenquan Cao
Publié dans: Fatigue & Fracture of Engineering Materials & Structures, 2022, ISSN 1460-2695
Éditeur: Wiley
DOI: 10.1111/ffe.13716

Effects of initial 3D printed microstructures on subsequent microstructural evolution in 316L stainless steel

Auteurs: Chunlei Zhang; Dorte Juul Jensen; Tianbo Yu
Publié dans: Acta Materialia, Numéro 5, 2023, ISSN 1359-6454
Éditeur: Elsevier BV
DOI: 10.1016/j.actamat.2022.118481

Impact of 3D/4D methods on the understanding of recrystallization

Auteurs: D. Juul Jensen, Y.B. Zhang
Publié dans: Current Opinion in Solid State and Materials Science, Numéro 24/2, 2020, Page(s) 100821, ISSN 1359-0286
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.cossms.2020.100821

Segregation and precipitation stabilizing an ultrafine lamellar-structured Al-0.3%Cu alloy

Auteurs: Linfei Shuai, Tianlin Huang, Tianbo Yu, Guilin Wu, Niels Hansen, Xiaoxu Huang
Publié dans: Acta Materialia, Numéro 206, 2021, Page(s) 116595, ISSN 1359-6454
Éditeur: Elsevier BV
DOI: 10.1016/j.actamat.2020.116595

Application of Mask R-CNN for lab-based X-ray diffraction contrast tomography

Auteurs: H. Fang, E. Hovad, Y. Zhang, D. Juul Jensen
Publié dans: Materials Characterization, Numéro 201, 2023, ISSN 1044-5803
Éditeur: Elsevier BV
DOI: 10.1016/j.matchar.2023.112983

Microstructural characterization of eutectic and near-eutectic AlCoCrFeNi high-entropy alloys

Auteurs: Adrianna Lozinko, Yubin Zhang, Oleg V. Mishin, Uta Klement, Sheng Guo
Publié dans: Journal of Alloys and Compounds, Numéro 822, 2020, Page(s) 153558, ISSN 0925-8388
Éditeur: Elsevier BV
DOI: 10.1016/j.jallcom.2019.153558

Heterogeneous lamellar-structured high manganese steel with excellent tensile properties

Auteurs: JC Xiong, JF Zhao, L Kong, HK Yang, XD Zhang, YH Wang
Publié dans: IOP Conference Series: Materials Science and Engineering, 2022, ISSN 1757-899X
Éditeur: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/1249/1/012036

Microstructure and Texture Evolution During Cold Rolling of 316L Stainless Steel

Auteurs: Chunlei Zhang, Dorte Juul Jensen, Tianbo Yu
Publié dans: Metallurgical and Materials Transactions A, Numéro 52/9, 2021, Page(s) 4100-4111, ISSN 1073-5623
Éditeur: ASM International
DOI: 10.1007/s11661-021-06367-6

In Situ Synchrotron X-ray Micro-Diffraction Investigation of Elastic Strains in Laminated Ti-Al Composites

Auteurs: Tianbo Yu, Yan Du, Guohua Fan, Rozaliya Barabash, Dorte Juul Jensen, Yubin Zhang
Publié dans: Metals, Numéro 11/4, 2021, Page(s) 668, ISSN 2075-4701
Éditeur: Metals
DOI: 10.3390/met11040668

Effect of inclusion type on the rotating bending fatigue properties of a high carbon chromium bearing steel

Auteurs: Z Shi, W Cao, C Shang, X Zhang
Publié dans: IOP Conference Series: Materials Science and Engineering, 2022, ISSN 1757-899X
Éditeur: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/1249/1/012032

Visualization of low-misorientation dislocation structures from orientation data using customized All-Euler maps

Auteurs: Chuanshi Hong
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 580, 2019, Page(s) 012033, ISSN 1757-899X
Éditeur: IOP Publishing Ltd
DOI: 10.1088/1757-899x/580/1/012033

Grain boundary wetting correlated to the grain boundary properties: A laboratory-based multimodal X-ray tomography investigation

Auteurs: J. Sun, Y. Zhang, A. Lyckegaard, F. Bachmann, E.M. Lauridsen, D. Juul Jensen
Publié dans: Scripta Materialia, Numéro 163, 2019, Page(s) 77-81, ISSN 1359-6462
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2019.01.007

Aging of 3D-printed maraging steel

Auteurs: E G Thorsteinsdóttir, D S Primdahl, Y B Zhang, D Juul Jensen, T Yu
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 580, 2019, Page(s) 012047, ISSN 1757-899X
Éditeur: I O P Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/580/1/012047

Alignment of sample position and rotation during in situ synchrotron X-ray micro-diffraction experiments using a Laue cross-correlation approach

Auteurs: Chenglu Zhang, Yubin Zhang, Guilin Wu, Wenjun Liu, Ruqing Xu, Dorte Juul Jensen, Andrew Godfrey
Publié dans: Journal of Applied Crystallography, Numéro 52/5, 2019, Page(s) 1119-1127, ISSN 1600-5767
Éditeur: JOURNAL OF APPLIED CRYSTALLOGRAPHY
DOI: 10.1107/s1600576719010562

An efficient method to improve the spatial resolution of laboratory X-ray diffraction contrast tomography

Auteurs: H Fang, D Juul Jensen, Y Zhang
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 580, 2019, Page(s) 012030, ISSN 1757-899X
Éditeur: I O P Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/580/1/012030

Investigation of plastic yielding in near-micrometer grain size aluminum using synchrotron microdiffraction

Auteurs: C.L. Zhang, A Godfrey, W.Q. Gao, Y.B. Zhang, G.L. Wu, W. Liu, R.Q. Xu, D. Juul Jensen
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 580, 2019, Page(s) 012056, ISSN 1757-899X
Éditeur: I O P Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/580/1/012056

Quantification of recrystallization kinetics in industrially processed 5xxx aluminum alloy sheet

Auteurs: X C Lei, R E Sanders, X F Yang, D Juul Jensen
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 580, 2019, Page(s) 012037, ISSN 1757-899X
Éditeur: I O P Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/580/1/012037

Integral mean curvature analysis of 3D grain growth: Linearity of dV/dt and grain volume

Auteurs: BR Patterson, RT DeHoff, CA Sahi, J Sun, J Oddershede, F Bachmann, E Lauridsen, D Juul Jensen
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 580, 2019, Page(s) 012020, ISSN 1757-899X
Éditeur: I O P Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/580/1/012020

Pt-20Rh dispersion strengthened by ZrO2 - Microstructure and strength

Auteurs: Faping Hu, Tianbo Yu, Weiting Liu, Yan Yang, Guobing Wei, Xuan Luo, Huiyi Tang, Niels Hansen, Xiaoxu Huang, Weidong Xie
Publié dans: Materials Science and Engineering: A, Numéro 765, 2019, Page(s) 138305, ISSN 0921-5093
Éditeur: Elsevier BV
DOI: 10.1016/j.msea.2019.138305

Grain size effect on deformation mechanisms in Mg-3Gd

Auteurs: X Luo, J Q Luo, Z Q Feng, F P Hu, T Yu, C Berggreen, G L Wu, N Hansen, X Huang
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 580, 2019, Page(s) 012040, ISSN 1757-899X
Éditeur: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/580/1/012040

A unified model for microstructural coarsening of deformed metals

Auteurs: T Yu
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 580, 2019, Page(s) 012054, ISSN 1757-899X
Éditeur: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/580/1/012054

Quantification of microstructure in a eutectic high entropy alloy AlCoCrFeNi 2.1

Auteurs: Adrianna Lozinko, Oleg V. Mishin, Tianbo Yu, Uta Klement, Sheng Guo, Yubin Zhang
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 580, 2019, Page(s) 012039, ISSN 1757-899X
Éditeur: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/580/1/012039

Recovery kinetics in Al-0.3%Cu after heavy rolling

Auteurs: L F Shuai, T L Huang, G L Wu, N Hansen, X Huang, T Yu
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 580, 2019, Page(s) 012044, ISSN 1757-899X
Éditeur: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/580/1/012044

Microstructure and strength of weldment in Pt20Rh alloys dispersion-strengthened by ZrO 2 particles

Auteurs: Faping Hu, Ziyang Wang, Tianbo Yu, Zonglun Yang, Guobing Wei, Xuan Luo, Niels Hansen, Xiaoxu Huang, Weidong Xie
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 580, 2019, Page(s) 012035, ISSN 1757-899X
Éditeur: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/580/1/012035

Strong pinning of triple junction migration for robust high strain nanostructures

Auteurs: Tianbo Yu, Darcy A. Hughes
Publié dans: Philosophical Magazine, Numéro 99/7, 2019, Page(s) 869-886, ISSN 1478-6435
Éditeur: Taylor & Francis
DOI: 10.1080/14786435.2018.1562282

Comparison of local stress and strain in a heterogeneouslycompressed AA 1050 ring by electron microscopy, microhardness and finite element modelling

Auteurs: C V Nielsen, N Hansen, X Zhang
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 580, 2019, Page(s) 012042, ISSN 1757-899X
Éditeur: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/580/1/012042

Effect of strain gradient on the microstructure and mechanical properties of pearlitic steel

Auteurs: Johan Ahlström, Xiaodan Zhang
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 580, 2019, Page(s) 012027, ISSN 1757-899X
Éditeur: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/580/1/012027

Exploring high strength metallic materials: a lesson from pearlitic steel wire

Auteurs: X Zhang
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 580, 2019, Page(s) 012058, ISSN 1757-899X
Éditeur: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/580/1/012058

Quantification of local boundary migration in 2D/3D

Auteurs: Yubin Zhang
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 580, 2019, Page(s) 012015, ISSN 1757-899X
Éditeur: I O P Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/580/1/012015

Subgrain dynamics during recovery of partly recrystallized aluminum

Auteurs: S.R. Ahl, H. Simons, C. Detlefs, D. Juul Jensen, H.F. Poulsen
Publié dans: Acta Materialia, Numéro 185, 2020, Page(s) 142-148, ISSN 1359-6454
Éditeur: Elsevier BV
DOI: 10.1016/j.actamat.2019.10.042

Influence Mechanisms of Inclusion Types on Rotating Bending Fatigue Properties of SAE52100 Bearing Steel

Auteurs: Z Shi, J Li, X Zhang, C Shang, W Cao
Publié dans: Materials 15, 2022, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma15145037

Nucleation of rebrystallization

Auteurs: Elisabeth Filippa Ferdinand Knipschildt
Publié dans: Crossref, Numéro 38, 2022, Page(s) 765-779, ISSN 0267-0836
Éditeur: Maney Publishing
DOI: 10.1080/02670836.2022.2065054

Quantitative Comparison of the Recrystallization Kinetics of Two Industrially Processed 5xxx Aluminum Alloys

Auteurs: Xiuchuan Lei, Robert Edward Sanders, Xiaofang Yang, Fengxiang Lin, Dorte Juul Jensen
Publié dans: Metallurgical and Materials Transactions A, Numéro 52/11, 2021, Page(s) 4827-4840, ISSN 1073-5623
Éditeur: ASM International
DOI: 10.1007/s11661-021-06427-x

A CPFEM based theoretical analysis of strains resolved by the microstructural feature tracking method

Auteurs: R. Li, R. Quey, Y. Zhang, M. Kobayashi, J. Oddershede, D. Jul Jensen
Publié dans: IOP Publishing Ltd, 2022, ISSN 1757-899X
Éditeur: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1249/1/012056

Interactions between Dislocations and Boundaries during Deformation

Auteurs: Hongjiang Pan, Yue He, Xiaodan Zhang
Publié dans: Materials, Numéro 14/4, 2021, Page(s) 1012, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma14041012

Local residual stresses and microstructure within recrystallizing grains in iron

Auteurs: Yubin Zhang*, Tianbo Yu, Ruqing Xu, Jesper Thorborg, Wenjun Liu, Jon Tischler, Andy Godfrey, Dorte Juul Jensen
Publié dans: Materials Characterization, 2022, ISSN 1044-5803
Éditeur: Elsevier BV
DOI: 10.1016/j.matchar.2022.112113

Microstructure Evolution and Tensile Properties of Cold-Rolled and Annealed Fe-30Mn-0.14C-7Cr-0.26Ni Steel

Auteurs: Xiaoman Chen, Jiaxin Zhang, Jianchao Xiong, Yuhui Wang, Yubin Zhang, Tiansheng Wang, Yan Peng
Publié dans: Metallurgical and Materials Transactions A, Numéro 52/9, 2021, Page(s) 3839-3848, ISSN 1073-5623
Éditeur: ASM International
DOI: 10.1007/s11661-021-06345-y

"""Effect of Aging Treatment on the Microstructureand Mechanical Properties of Fe-Mn-Al-C Low Density Steel"""

Auteurs: GY Li, L Kong, EZ Liu, XD Zhang, WQ Cao, YH Wang
Publié dans: IOP Conference Series: Materials Science and Engineering, 2022, ISSN 1757-899X
Éditeur: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/1249/1/012053

Effect of tempering temperature on the wear behaviour of martensitic ductile iron

Auteurs: Jiaojiao Bai; Haifeng Xu; Xingpin Chen; Wenquan Cao; Xiaodan Zhang; Yang Xu
Publié dans: Materials Science and Technology, Numéro 39, 2023, ISSN 0267-0836
Éditeur: Maney Publishing
DOI: 10.1080/02670836.2022.2139008

Surface patterning for combined digital image correlation and electron backscatter diffraction in-situ deformation experiments

Auteurs: Shiqi Zhang, Andrew Godfrey, Chenglu Zhang, Wei Liu, Dorte Juul Jensen
Publié dans: Materials Characterization, Numéro 164, 2020, Page(s) 110332, ISSN 1044-5803
Éditeur: Elsevier BV
DOI: 10.1016/j.matchar.2020.110332

Unusual through-thickness variations of microstructure and texture in heavily rolled and annealed Al–0.3%Cu

Auteurs: L.F. Shuai, T.L. Huang, G.L. Wu, G. Winther, X. Huang, O.V. Mishin
Publié dans: Materials Characterization, Numéro 162, 2020, Page(s) 110173, ISSN 1044-5803
Éditeur: Elsevier BV
DOI: 10.1016/j.matchar.2020.110173

Finite element modelling of indentation testing in an AA1050 microstructure

Auteurs: S Goutianos, H Pan, X Zhang
Publié dans: IOP Conference Series: Materials Science and Engineering, 2022, ISSN 1757-899X
Éditeur: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/1249/1/012031

Dislocation Mechanisms and Local Strength with a View towards Sleeper Screw Failures

Auteurs: Kang Lin, Lichu Zhou, Dorte Juul Jensen, Xiaodan Zhang
Publié dans: Crystals, 2023, ISSN 2073-4352
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/cryst13040656

Strain distribution and lattice rotations during in-situ tension of aluminum with a transmodal grain structure

Auteurs: W.Q. Gao, C.L. Zhang, M.X. Yang, S.Q. Zhang, D. Juul Jensen, A. Godfrey
Publié dans: Materials Science and Engineering: A, Numéro 828, 2021, Page(s) 142010, ISSN 0921-5093
Éditeur: Elsevier BV
DOI: 10.1016/j.msea.2021.142010

Improved grain mapping by laboratory X-ray diffraction contrast tomography

Auteurs: H. Fang, D. Juul Jensen, Y. Zhang
Publié dans: IUCrJ, Numéro 8/4, 2021, Page(s) 559-573, ISSN 2052-2525
Éditeur: IUCr Journals
DOI: 10.1107/s2052252521003730

Quantification of room temperature strengthening of laser shock peened Ni-based superalloy using synchrotron microdiffraction

Auteurs: Guangni Zhou, Yubin Zhang*, Wolfgang Pantleon, Jiawei Kou, Upadrasta Ramamurty, Xipeng Tan, Sihai Luo, Weifeng He, Ching-Shun Ku, Ching-Yu Chiang, Nobumichi Tamura, Kai Chen
Publié dans: Materials & Design, 2022, ISSN 0264-1275
Éditeur: Elsevier BV
DOI: 10.1016/j.matdes.2022.110948

Melting route effects on the rotatory bending fatigue and rolling contact fatigue properties of high carbon bearing steel SAE52100

Auteurs: Zhaoxi Cao, Zhiyue Shi, Bo Liang, Xiaodan Zhang, Wenquan Cao, Yuqing Weng
Publié dans: International Journal of Fatigue, Numéro 140, 2020, Page(s) 105854, ISSN 0142-1123
Éditeur: Elsevier BV
DOI: 10.1016/j.ijfatigue.2020.105854

Influence of geometrical alignment of the deformation microstructure on local migration of grain boundaries during recrystallization: A phase-field study

Auteurs: Vishal Yadav, Nele Moelans, Yubin Zhang, Dorte Juul Jensen
Publié dans: Scripta Materialia, Numéro 191, 2021, Page(s) 116-119, ISSN 1359-6462
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2020.09.028

Enhanced strength in pure Ti via design of alternating coarse- and fine-grain layers

Auteurs: Danyang Li, Guohua Fan, Xiaoxu Huang, Dorte Juul Jensen, Kesong Miao, Chao Xu, Lin Geng, Yubin Zhang, Tianbo Yu
Publié dans: Acta Materialia, Numéro 206, 2021, Page(s) 116627, ISSN 1359-6454
Éditeur: Elsevier BV
DOI: 10.1016/j.actamat.2021.116627

3D mapping of orientation variation and local residual stress within individual grains of pearlitic steel using synchrotron dark field X-ray microscopy

Auteurs: C. Yildirim, C. Jessop, J. Ahlström, C. Detlefs, Y. Zhang
Publié dans: Scripta Materialia, Numéro 197, 2021, Page(s) 113783, ISSN 1359-6462
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2021.113783

Tensile deformation-induced twinning in an austenitic low density steel over a wide range of temperature

Auteurs: Wang, H., Liang, J., Shi, Z., Wang, C., Zhang, X. & Cao, W
Publié dans: IOP Conference Series: Materials Science and Engineering, 2022, ISSN 1757-899X
Éditeur: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/1249/1/012011

Twinning during recrystallization and its correlation with the deformation microstructure

Auteurs: Lin, F., Zhang, Y., Godfrey, A., Jensen, D. J.
Publié dans: Scripta Materialia, 2022, ISSN 1359-6462
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2022.114852

A phase-field investigation of recrystallization boundary migration into heterogeneous deformation energy fields: Effects of dislocation boundary sharpness

Auteurs: R Li, V Yadav, N Moelans, Y Zhang, D Juul Jensen
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 1121/1, 2021, Page(s) 012013, ISSN 1757-8981
Éditeur: I O P Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/1121/1/012013

Microstructure and strengthening mechanisms of 90W–7Ni–3Fe alloys prepared using laser melting deposition

Auteurs: Y.P. Wang, S.Y. Ma, X.S. Yang, Y.Z. Zhou, X. Liu, J.F. Li, J.J. Zhang, C. Li, X.Y. Wang, G.M. Le, Y. Zhang
Publié dans: Journal of Alloys and Compounds, Numéro 838, 2020, Page(s) 155545, ISSN 0925-8388
Éditeur: Elsevier BV
DOI: 10.1016/j.jallcom.2020.155545

An experimentally-based molecular dynamics analysis of grain boundary migration during recrystallization in aluminum

Auteurs: R. Li, E.R. Homer, C. Hong, Y. Zhang, D. Juul Jensen,
Publié dans: Scripta Materialia, 2022, ISSN 1872-8456
Éditeur: Scripta Materialia
DOI: 10.1016/j.scriptamat.2021.114489

Analysis of Sleeper Screw Failures

Auteurs: Xiaodan Zhang, Yubin Zhang, Carsten Jørn Rasmussen, Martin Tandrup Lange, Dorte Juul Jensen
Publié dans: Intelligent Quality Assessment of Railway Switches and Crossings, 2021, Page(s) 93-105, ISBN 978-3-030-62471-2
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-030-62472-9_6

Deformation Microstructure and Recovery

Auteurs: Tianbo Yu
Publié dans: 2020
Éditeur: Nova Science Publishers

Recherche de données OpenAIRE...

Livrables

Publications

Partager cette page

Télécharger