Development of new Competitive and Sustainable Bio-Based Plastics

Informations projet

NEWPACK

N° de convention de subvention: 792261

DOI

10.3030/792261

Projet clôturé

Date de signature de la CE 4 Mai 2018

Date de début 1 Juin 2018

Date de fin 31 Août 2021

Financé au titre de

• SOCIETAL CHALLENGES - Food security, sustainable agriculture and forestry, marine, maritime and inland water research, and the bioeconomy

Coût total

€ 5 234 340,82

Contribution de l’UE

€ 4 197 929,94

Coordonné par

OULUN YLIOPISTO
Finland

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Documents, reports (12)

Project platform on-line

NEWPACK Website available in the internet.

Market analysis

Market analysis of whole value network including packaging material producers, retailers, food companies, consumers including the current demand and market volume of food packaging plastic materials and analysis of the competitive environment and substitutes will also be conducted.

Report on the strategy for dissemination, communication and exploitation

Guidance document on dissemination, communication and exploitation activities as well as procedures

Public final report

The final report will consists of a technical and a financial report for the whole project The technical part will include a summary of the project results furthermore their socioeconomic impact

Report on events

Protocols regarding performed project events

Report on Screening Life Cycle Assessment (Hot spot analysis)

In view of integrated eco-design, identify the hotspots and provide recommendations to be fed back to partners on the most promising configurations from a sustainability point of view.

Report on the value chain analysis

The report will include an identification and analysis of existing value networks in plastics and related industry sectors and the core actors and the relevant business models in the current situation of the industry Also an analysis of the existing industry data using the interview data obtained previously among relevant actors of the value chains will contribute to the understanding of the market potential And finally study of the existing value networks and formation of new value networks will be included

Final Report on Life Cycle Assessment

Full life cycle analysis of NEWPACK solutions compared to alternative food packaging solutions baseline in terms of environmental performance over the entire life cycle

Report on economic analysis.

The economic analysis of a full commercial scale of the processes developed in NEWPACK will include the calculation of the investment needed including equipment the fixed and variable operational costs a discounted cash flow analysis and the minimum selling price of the products and a cost sensibility analysis It will conclude with the potential economic feasibility of the manufacturing process

Dissemination portfolio

Compilation of all dissemination and communication tools designed and activities performed during the project

Customer perception of new biobased food packaging materials

The report will summarize the customer perception about the consumption of food packed in novel biobased materials with enhanced conservation properties but also safer for the environment

Availability of feedstock resources in Europe

Study of the feedstock necessary for the bioplastic production in Europe.

Publications

Conference proceedings (2)

Restructuring value networks to enable sustainable innovations in food packaging plastic industry

Auteurs: Keränen, O. (Outi); Komulainen, H. (Hanna); Ulkuniemi, P. (Pauliina)
Publié dans: Online proceedings of the 35th Annual IMP Conference, Paris, France, Numéro 2019, 2019
Éditeur: IMP Group

Mobilizing change in an industry network for commercializing a sustainable innovation

Auteurs: Outi Keränen, Tuula Lehtimäki, Hanna Komulainen, Pauliina Ulkuniemi
Publié dans: Online proceedings of the 36th Annual IMP Conference, Örebro, Sweden, 2020
Éditeur: Öerbro University

Peer reviewed articles (11)

Bioplastics and Carbon-Based Sustainable Materials, Components, and Devices: Toward Green Electronics

Auteurs: Éva Bozó, Henri Ervasti, Niina Halonen, Seyed Hossein Hosseini Shokouh, Jarkko Tolvanen, Olli Pitkänen, Topias Järvinen, Petra S. Pálvölgyi, Ákos Szamosvölgyi, András Sápi, Zoltan Konya, Marta Zaccone, Luana Montalbano, Laurens De Brauwer, Rakesh Nair, Vanesa Martínez-Nogués, Leire San Vicente Laurent, Thomas Dietrich, Laura Fernández de Castro, Krisztian Kordas
Publié dans: ACS Applied Materials & Interfaces, Numéro 13/41, 2021, Page(s) 49301-49312, ISSN 1944-8244
Éditeur: American Chemical Society
DOI: 10.1021/acsami.1c13787

Ultra-low permittivity porous silica-cellulose nanocomposite substrates for 6G telecommunication

Auteurs: Petra S Pálvölgyi, Mikko Nelo, Olli Pitkänen, Jani Peräntie, Henrikki Liimatainen, Sami Myllymäki, Heli Jantunen, Krisztian Kordas
Publié dans: Nanotechnology, Numéro 31/43, 2020, Page(s) 435203, ISSN 0957-4484
Éditeur: Institute of Physics Publishing
DOI: 10.1088/1361-6528/aba4cc

Grid-type transparent conductive thin films of carbon nanotubes as capacitive touch sensors

Auteurs: Ronja Valasma, Eva Bozo, Olli Pitkänen, Topias Järvinen, Aron Dombovari, Melinda Mohl, Gabriela Simone Lorite, Janos Kiss, Zoltan Konya, Krisztian Kordas
Publié dans: Nanotechnology, Numéro 31/30, 2020, Page(s) 305303, ISSN 0957-4484
Éditeur: Institute of Physics Publishing
DOI: 10.1088/1361-6528/ab8590

Implementation of auto-hydrolysis process for the recovery of antioxidants and cellulose from wheat straw

Auteurs: Andrea Bassani, Cecilia Fiorentini, Vellingiri Vadivel, Alessandro Moncalvo and Giorgia Spigno
Publié dans: Applied Sciences, 2020, ISSN 2076-3417
Éditeur: MDPI
DOI: 10.3390/app10176112

Kinetic Model of Wheat Straw Autohydrolysis Considering Heating and Cooling Phases

Auteurs: Andrea Bassani, Cecilia Fiorentini, Guillermo Duserm Garrido, Daniele Carullo, Giorgia Spigno
Publié dans: CHEMICAL ENGINEERING TRANSACTIONS, Numéro Volume 87, 2021, Page(s) 199-204, ISSN 2283-9216
Éditeur: Italian Association of Chemical Engineering - AIDIC
DOI: 10.3303/cet2187034

Incorporation of Waste Orange Peels Extracts Into PLA Films

Auteurs: Bassani, A., Montes, S., Jubete, E., Palenzuela, J., Sanjuan, A. P., & Spigno, G.
Publié dans: Chemical Engineering Transactions, Numéro 74, 2019, Page(s) 1063-1068, ISSN 2283-9216
Éditeur: The Italian Association of Chemical Engineering
DOI: 10.3303/cet1974178

Piezoresistive Carbon Foams in Sensing Applications

Auteurs: Krisztian Kordas, Olli Pitkänen
Publié dans: Frontiers in Materials, Numéro 6, 2019, Page(s) 1-9, ISSN 2296-8016
Éditeur: Frontiers Media SA
DOI: 10.3389/fmats.2019.00093

Cu-Pd Bimetal and CuPt Alloy Nanotubes Derived From Cu Nanowires: Novel Amplification Media for Surface-Enhanced Raman Spectroscopy

Auteurs: Eva Bozo, Aron Dombovari, Melinda Mohl, Vesa K. Virtanen, Simo Saarakkala, Robert Vajtai, Krisztian Kordas
Publié dans: IEEE Sensors Journal, Numéro 20/1, 2020, Page(s) 143-148, ISSN 1530-437X
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsen.2019.2939677

Restructuring existing value networks to diffuse sustainable innovations in food packaging

Auteurs: Outi Keränen, Hanna Komulainen, Tuula Lehtimäki, Pauliina Ulkuniemi
Publié dans: Industrial Marketing Management, 2020, ISSN 0019-8501
Éditeur: Elsevier BV
DOI: 10.1016/j.indmarman.2020.10.011

Bio-Based Smart Materials for Food Packaging and Sensors – A Review

Auteurs: Niina Halonen, Petra S. Pálvölgyi, Andrea Bassani, Cecilia Fiorentini, Rakesh Nair, Giorgia Spigno, Krisztian Kordas
Publié dans: Frontiers in Materials, Numéro 7, 2020, Page(s) 14, ISSN 2296-8016
Éditeur: Frontiers in Materials
DOI: 10.3389/fmats.2020.00082

Hydrothermal treatment of grape skins for sugars, antioxidants and soluble fibers production

Auteurs: Andrea Bassani, Noemi Alberici, Cecilia Fiorentini, Gianluca Giuberti, Roberta Dordoni, Giorgia Spigno
Publié dans: CHEMICAL ENGINEERING TRANSACTIONS, 2020, ISSN 2283-9216
Éditeur: Italian Association of Chemical Engineering - AIDIC
DOI: 10.3303/cet2079022