Digital Manufacturing and Design Training Network

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Pros / Cons on the Integration of Agents' Technology in Manufacturing

Pros / Cons on the Integration of Agents’ Technology in Manufacturing

Dissemination plan
Advanced approaches for Diagnosis, Monitoring and Security tasks in CPS
Intermediate coordination report

Summary to commission of all activities of the network. It includes reporting about management, training, recruitment, dissemination/exploitation, as well as scientific activities.

CPS State-of-the-art analysis and requirements specification

Deliverable with the analysis of the state-of-the-art and the requirement specification for CPS

Using agents to perform Control and Configuration roles in Industry
Summary of journal and conference papers published by ESRs
Updated dissemination plan

Review and update dissemination plan

Guide to develop and deploy CPS resources

A comprehensive manual that can guide industrial practitioners in the development and deployment of CPS

State-of-the-art on Integration of cutting edge interoperability approaches in Manufacturing and Cyber Safety and Security requirements
Using Big-Data in Industry - Challenges and Approaches

Using Big-Data in Industry – Challenges and Approaches

Progress report

Progress report as base for the Project check to be held at M14. It includes reporting about management, training, recruitment, dissemination/exploitation, as well as scientific activities.

CPS Architecture

CPS Architecture that provides the necessary framework for the development of CPS

Data Management Plan M30

Updated Data Management Plan M36

Data Management Plan M6

Data Management Plan

"School #4"

"School #4: Mixed Reality systems event"

"School #2"

"School #2: Distributed Agent Control event"

"School #3"

"School #3: Cyber Safety and Security event"

Dissemination and Exploitation conference
Supervisory Board of the network

Supervisory Board of the network formed

Industry Fact Sheets Year 2

Publication of Industry Fact Sheets Year 2

Industry Fact Sheets Year 3

Publication of Industry Fact Sheets Year 3

Project website

Project website established: describing the project, aims and objectives and inviting wider participation

Industry Fact Sheets Year 4

Publication of Industry Fact Sheets Year 4

DiManD newsletter Year 4

Publication of DiManD newsletter Year 4

DiManD newsletter Year 1

Publication of DiManD newsletter Year 1

DiManD newsletter Year 2

Publication of DiManD newsletter Year 2

DiManD newsletter Year 3

Publication of DiManD newsletter Year 3

Services to support analysis, business models

Self-contained and combinable services to support analysis of production performance, monitoring and optimisation activities

Results of Test Cases

A pilot will be developed and tested to integrate the techniques and technologies studied and researched in the previous tasks.

Publicaciones

A Framework for Manufacturing System Reconfiguration Based on Artificial Intelligence and Digital Twin

Autores: Mo, Fan; Chaplin, Jack C.; Sanderson, David; Rehman, Hamood Ur; Monetti, Fabio Marco; Maffei, Antonio; Ratchev, Svetan
Publicado en: Lecture Notes in Mechanical Engineering ISBN: 9783031183256, 2022, ISSN 2195-4364
Editor: Springer, Cham
DOI: 10.1007/978-3-031-18326-3_35

Human-Centred Design in the context of Servitization in Industry 4.0: A Collaborative Approach

Autores: Nguyen Ngoc, Hien Lasa Erle, Ganix Iriarte Azpiazu, Ion
Publicado en: 30th RESER International Congress., Edición 11, 2021
Editor: RESER International Congress

Service Based Approach to Asset Administration Shell for Controlling Testing Processes in Manufacturing

Autores: Hamood Ur Rehman, Jack C. Chaplin, Leszek Zarzycki, Fan Mo, Mark Jones, Svetan Ratchev
Publicado en: 10th IFAC Conference on Manufacturing Modelling, Management and Control, 2022
Editor: IFAC-PapersOnLine / ELSEVEIER

Cloud Based Decision Making for Multi-agent Production Systems

Autores: Hamood Ur Rehman, Terrin Pulikottil, Luis Alberto Estrada-Jimenez, Fan Mo, Jack C. Chaplin, Jose Barata, Svetan Ratchev
Publicado en: Progress in Artificial Intelligence - 20th EPIA Conference on Artificial Intelligence, EPIA 2021, Virtual Event, September 7–9, 2021, Proceedings, Edición 12981, 2021, Página(s) 673-686, ISBN 978-3-030-86229-9
Editor: Springer International Publishing
DOI: 10.1007/978-3-030-86230-5_53

A Bio-inspired and Altruistic-Based Framework to Support Collaborative Healing in a Smart Manufacturing Shop-Floor

Autores: Estrada-Jimenez, L.A., Kalateh, S., Hojjati, S.N., Barata, J.
Publicado en: 14th Advanced Doctoral Conference On Computing, Electrical And Industrial Systems, 2023
Editor: Springer

Towards quasi-static kinematic calibration of serial articulated industrial manipulators

Autores: Nikolas Theissen Fabio Marco Monetti Monica Gonzalez Antonio Maffei
Publicado en: The 30th Mediterranean Conference on Control and Automation, 2022, ISBN 978-1-6654-0674-1
Editor: IEEE
DOI: 10.1109/med54222.2022.9837167

Efficient Decision-Making in SMEs: Leveraging Knowledge Graphs with Neo4j and AI Vision

Autores: Mo, Fan.;Ur Rehman, Hamood;Elshafei, Basem;Chaplin, Jack C.;Sanderson, David;Martínez-Arellano, Giovanna;Ratchev, Svetan
Publicado en: Low-Cost Digital Solutions for Industrial Automation (LoDiSA 2023), 2023, Página(s) 69 - 75, ISBN 978-1-83953-932-9
Editor: IET Conference Proceedings
DOI: 10.1049/icp.2023.1736

Predictive Manufacturing: Enabling Technologies, Frameworks and Applications

Autores: Terrin Pulikottil, Luis Alberto Estrada-Jimenez, Sanaz Nikghadam-Hojjati, Jose Barata
Publicado en: Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2021, 2021
Editor: Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2021
DOI: 10.1007/978-3-030-78288-7_5

Functional information integration in product development by using assembly features

Autores: Nathaly Rea Minangoa, Antonio Maffei
Publicado en: 33rd CIRP Design Conference, 2023
Editor: Elsevier
DOI: 10.1016/j.procir.2023.03.095

Characteristics of Adaptable Control of Production Systems and the Role of Self-Organization towards Smart Manufacturing

Autores: Luis Alberto Estrada-Jimenez, Sanaz Nikghadam-Hojjati, Jose Barata
Publicado en: Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2021, 2021
Editor: Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2021
DOI: 10.1007/978-3-030-78288-7_4

A digital twin framework for the simulation and optimization of production systems

Autores: Itziar Ricondo, Alain Porto, Miriam Ugarte
Publicado en: Procedia CIRP, Edición 104, 2021, Página(s) 762-767, ISSN 2212-8271
Editor: ScienceDirect
DOI: 10.1016/j.procir.2021.11.128

Complexity theory and self-organization in Cyber-Physical Production Systems

Autores: Luis Alberto Estrada-Jimenez, Terrin Pulikottil, Ricardo Silva Peres, Sanaz Nikghadam-Hojjati, Jose Barata
Publicado en: 54th CIRP Conference on Manufacturing Systems, Edición Volume 104, 2021, 2021, Página(s) 1831-1836, ISSN 2212-8271
Editor: ScienceDirect
DOI: 10.1016/j.procir.2021.11.309

Towards a DevOps Approach in Cyber Physical Production Systems Using Digital Twins

Autores: Miriam Ugarte Querejeta, Leire Etxeberria, Goiuria Sagardui
Publicado en: Computer Safety, Reliability, and Security. SAFECOMP 2020 Workshops - DECSoS 2020, DepDevOps 2020, USDAI 2020, and WAISE 2020, Lisbon, Portugal, September 15, 2020, Proceedings, Edición 12235, 2020, Página(s) 205-216, ISBN 978-3-030-55582-5
Editor: Springer International Publishing
DOI: 10.1007/978-3-030-55583-2_15

Identification and Categorization of Assembly Information for Collaborative Product Realization

Autores: Nathaly Rea Minango, Mariam Nafisi, Mikael Hedlind, Antonio Maffei
Publicado en: 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (https://carv2020.com/), 2021
Editor: Andersen AL. et al. (eds) Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems. CARV 2021, MCPC 2021.
DOI: 10.1007/978-3-030-90700-6_65

Towards the assessment of performance-based interactions in collaborative CPPS

Autores: Jose Antonio Mulet Alberola, Irene Fassi
Publicado en: ISM 2021, 2022
Editor: Procedia Computer Science
DOI: 10.1016/j.procs.2022.01.364

Hyperspectral imaging for non-destructive testing of composite materials and defect classification

Autores: Trunal Patil, Claudia Pagano, Roberto Marani, Tiziana D'Orazio, Giacomo Copani, Irene Fassi
Publicado en: Lecture Notes in Mechanical Engineering, Edición Flexible Automation and Intelligent Manufacturing International Conference, 2022, Página(s) 404-412, ISBN 978-3-031-18325-6
Editor: Springer Link
DOI: 10.1007/978-3-031-18326-3_39

A Systematic Literature Review: Key Performance Indicators on Feeding-as-a-Service

Autores: Fabio Marco Monetti, Marco Bertoni, Antonio Maffei
Publicado en: Advances in Transdisciplinary Engineering, 2024., 2024, ISBN 978-1-64368-510-6
Editor: IOS Press
DOI: 10.3233/atde240170

Assessing the relationships between interdigital geometry quality and inkjet printing parameters

Autores: Federico Bertolucci, Nicolò Berdozzi, Lara Rebaioli, Trunal Patil, Rocco Vertechy, Irene Fassi
Publicado en: Micromachines, 2022, ISSN 2072-666X
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi13010057

An experimental study of the impact of virtual reality training on manufacturing operators on industrial robotic tasks

Autores: F.M. Monetti, A. de Giorgio, H.Yu, A. Maffei, M.Romero
Publicado en: Procedia CIRP, 2022
Editor: Elsevier
DOI: 10.1016/j.procir.2022.02.151

Multi-agent based manufacturing: current trends and challenges

Autores: Terrin Pulikottil, Luis Alberto Estrada-Jimenez,Hamood Ur Rehman, Jose Barata, Sanaz Nikghadam-Hojjati, Leszek Zarzycki
Publicado en: ETFA 2021 : 26th IEEE International Conference on Emerging Technologies and Factory Automation, 2021
Editor: ETFA 2021 : 26th IEEE International Conference on Emerging Technologies and Factory Automation

Using physical interfaces for product design: from design to assembly planning

Autores: Nathaly Rea Minango; Antonio Maffei
Publicado en: 56th CIRP Conference on Manufacturing Systems, Edición Volume 120, 2023, Página(s) 1303-1308, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2023.09.167

Search-based Test Case Selection for PLC Systems using Functional Block Diagram Programs

Autores: Miriam Ugarte, Eunkyoung Jee, Lingjun Liu, Pablo Valle, Aitor Arrieta, Miren Illarramendi
Publicado en: 2023 IEEE 34th International Symposium on Software Reliability Engineering (ISSRE), 2023
Editor: IEEE
DOI: 10.1109/issre59848.2023.00040

Exploring the limitations and potential of digital twins for mobile manipulators in industry

Autores: Dario Antonelli, Khurshid Aliev, Marco Soriano, Kousay Samir, Fabio Marco Monetti, Antonio Maffei
Publicado en: 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM 2023), 2023
Editor: Elsevier
DOI: 10.1016/j.procs.2024.01.110

Exploring the transformation of user interactions to Adaptive Human-Machine Interfaces

Autores: Carrera-Rivera, Angela; Reguera-Bakhache, Daniel; Larrinaga, Felix; Lasa, Ganix
Publicado en: Interaccion '23: Proceedings of the XXIII International Conference on Human Computer Interaction, 2024, ISBN 979-8-4007-0790-2
Editor: Association for Computing Machinery
DOI: 10.1145/3612783.3612807

An overview of Industry 4.0 Applications for Advanced Maintenance Services

Autores: Nguyen Ngoc Hien, Ganix Lasaa, Ion Iriarte,, Gorka Unamuno
Publicado en: International Conference on Industry 4.0 and Smart Manufacturing, 2022
Editor: Published by Elsevier B.V
DOI: 10.1016/j.procs.2022.01.277

Optimal Manufacturing Configuration Selection: Sequential Decision Making and Optimization using Reinforcement Learning

Autores: Agajan Torayev, Jose Joaquin Peralta Abadia, Giovanna Martínez-Arellano, Mikel Cuesta, Jack C Chaplin, Felix Larrinaga, David Sanderson, Pedro-José Arrazola, Svetan Ratchev
Publicado en: 56th CIRP Conference on Manufacturing Systems Procedia CIRP, 2023, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2023.09.112

A meta-learning strategy based on deep ensemble learning for tool condition monitoring of machining processes

Autores: Jose Joaquin Peralta Abadia, Mikel Cuesta Zabaljauregui, Felix Larrinaga Barrenechea
Publicado en: 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 2023
Editor: Elsevier

Simulation of corona electrostatic separator for end-of-life management in printed circuit boards

Autores: Trunal Patil, Lara Rebaioli, Irene Fassi
Publicado en: IDETC/CIE 2021 - ASME 2021 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference., 2021
Editor: IDETC/CIE 2021 - ASME 2021 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference.

Feeding-as-a-Service in a cloud manufacturing environment

Autores: Fabio Marco Monetti, Antonio Maffei
Publicado en: 56th CIRP Conference on Manufacturing Systems, CIRP CMS ‘23, 2023
Editor: Elsevier
DOI: 10.1016/j.procir.2023.09.181

Conceptual framework for smart maintenance based on distributed intelligence

Autores: Terrin Pulikottil, Luis A. Estrada-Jimenez, Jose Barata
Publicado en: 5th IFAC Workshop on Advanced Maintenance Engineering, Services and Technology, 26-29 July 2022, Bogota, 2022
Editor: Elsevier
DOI: 10.1016/j.ifacol.2022.09.194

UX- for Smart-PSS: Towards a Context-Aware Framework

Autores: Angela Isabel Carrera-Rivera,Felix Larrinaga, Ganix Lasa, Giovanna Martinez-Arellano
Publicado en: CHIRA - 6th International Conference on Computer-Human Interaction Research and Applications, 2022
Editor: SCITEPRESS
DOI: 10.5220/0011379700003323

Implementation of Digital Twin-based Virtual Commissioning in Machine Tool Manufacturing

Autores: Miriam Ugarte Querejeta, Gorka Unamuno, Jose Luis Bellanco, Eneko Ugalde
Publicado en: 2022
Editor: International Conference on Industry 4.0 and Smart Manufacturing
DOI: 10.1016/j.procs.2022.01.250

Optimal Selection of Manufacturing Configurations using Object-Oriented and Mathematical Data Models

Autores: Agajan Torayev, Zi Wang, Giovanna Martínez-Arellano,, Jack C. Chaplin, David Sanderson, Svetan Ratchev
Publicado en: International Conference on Industrial Engineering and Applications (ICIEA 2023), 2023, ISBN 978-1-64368-408-6
Editor: IOS Press
DOI: 10.3233/atde230025

How-to conduct a systematic literature review: A quick guide for computer science research

Autores: Angela Carrera-Rivera, William Ochoa, Felix Larrinaga, Ganix Lasa.
Publicado en: MethodsX, 2022, ISSN 2405-8963
Editor: Elsevier
DOI: 10.1016/j.mex.2022.101895

A Modular Artificial Intelligence and Asset Administration Shell Approach to Streamline Testing Processes in Manufacturing Services

Autores: Hamood Ur Rehmana, Fan Mo, Jack C. Chaplin, Leszek Zarzycki, Mark Jones, Svetan Ratchev
Publicado en: Journal of Manufacturing Systems, 2023, ISSN 0278-6125
Editor: Elsevier BV
DOI: 10.1016/j.jmsy.2023.12.004

Monitorización de estado de la herramienta en mecanizado mediante redes neuronales residuales robustas

Autores: Jose Joaquin Peralta Abadia, Mikel Cuesta Zabaljauregui, Felix Larrinaga Barrenechea
Publicado en: DYNA Ingeniería e Industria, Edición Accepted but not published yet, 2024, ISSN 0012-7361
Editor: Federacion de Asociaciones de Ingenieros Industriales de Espana

Analysis of interactive manufacturing systems: towards a performance-based assessment methodology

Autores: Jose A. Mulet Alberola, Irene Fassi
Publicado en: IET Collaborative Intelligent Manufacturing, 2022, ISSN 2516-8398
Editor: The Institution of Engineering and Technology.
DOI: 10.1049/cim2.12063

Datasets of skills-rating questionnaires for advanced service design through expert knowledge elicitation

Autores: Hien Nguyen Ngoc, Ganix Lasa, Ion Iriarte, Ariane Atxa, Gorka Unamuno, Gurutz Galfarsoro
Publicado en: Scientific Data, 2022, ISSN 2052-4463
Editor: Scientific Data
DOI: 10.1038/s41597-022-01421-3

Big Data Life Cycle in Shop-floor –Trends and Challenges

Autores: TERRIN PULIKOTTIL, LUIS A. ESTRADA-JIMENEZ, JOSÉ JOAQUÍN PERALTA ABADÍA, ANGELA CARRERA-RIVERA, AGAJAN TORAYEV,HAMOOD UR REHMAN, FAN MO, SANAZ NIKGHADAM-HOJJATI AND JOSE BARATA
Publicado en: IEEE Access Journal, 2023, ISSN 2169-3536
Editor: Institute of Electrical and Electronics Engineers Inc.

VIRTUAL COMMISSIONING IN MACHINE TOOL MANUFACTURING: A SURVEY FROM INDUSTRY

Autores: Miriam Ugarte Querejeta, LEIRE ETXEBERRIA ELORZA, GOIURIA SAGARDUI MENDIETA, GORKA UNAMUNO EGUREN, IÑIGO BEDIAGA ESCUDERO
Publicado en: DYNA, Edición 96/6, 2021, Página(s) 612-619, ISSN 1989-1490
Editor: DYNA
DOI: 10.6036/10244

Towards the definition of assembly-oriented modular product architectures: a systematic review

Autores: Fabio Marco Monetti; Antonio Maffei
Publicado en: Research in Engineering Design Journal, Edición Volume 30, 2024, Página(s) 137–169, ISSN 0934-9839
Editor: Springer Verlag
DOI: 10.1007/s00163-023-00427-1

Cyber-Physical Systems for End-of-Life management of Printed Circuit Boards and Mechatronics products in Home Automation: A review

Autores: Trunal Patil, Lara Rebaioli, Irene Fassi
Publicado en: Sustainable Materials and Technologies, 2022, ISSN 2214-9937
Editor: ScienceDirect
DOI: 10.1016/j.susmat.2022.e00422

Self-organization in Smart Manufacturing - Background, Systematic Review, Challenges and Outlook

Autores: Luis Alberto Estrada-Jimenez, Terrin Babu Pulikottil, Sanaz Nikghadam-Hojjati & Jose Barata
Publicado en: IEEE Access, 2023, ISSN 2169-3536
Editor: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/access.2023.3240433

Development of a new set of Heuristics for the evaluation of Human-Robot Interaction in industrial settings: Heuristics Robots Experience (HEUROBOX)

Autores: Ainhoa Apraiz, Jose Antonio Mulet Alberola, Ganix Lasa, Maitane Mazmela, Hien Ngoc Nguyen
Publicado en: Frontiers in Robotics and AI, Edición Volume 10, 2023, ISSN 2296-9144
Editor: Frontiers
DOI: 10.3389/frobt.2023.1227082

Immune system inspired smart maintenance framework: Tool wear monitoring use case

Autores: Terrin Pulikottil; Giovanna Martínez-Arellano; Jose Barata
Publicado en: The International Journal of Advanced Manufacturing Technology, Edición 132, 2024, Página(s) 4699-4721, ISSN 0268-3768
Editor: Springer Verlag
DOI: 10.1007/s00170-024-13472-4

Semantic models and knowledge graphs as manufacturing system reconfiguration enablers

Autores: Fan Mo, Jack C. Chaplin, David Sanderson, Giovanna Martínez-Arellano, Svetan Ratchev
Publicado en: Robotics and Computer-Integrated Manufacturing, 2024, ISSN 0736-5845
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.rcim.2023.102625

PLC Orchestration Automation to enhance Human-Machine Integration in Adaptive

Autores: Fan Mo, Miriam Ugarte Querejeta, Joseph Hellewell, Hamood Ur Rehman, Miren Illarramendi Rezabal, Jack C. Chaplin, David Sanderson,Svetan Ratchev
Publicado en: Journal of Manufacturing Systems, 2023, ISSN 0278-6125
Editor: Elsevier BV
DOI: 10.1016/j.jmsy.2023.07.015

Implementation of a holistic digital twin solution for design prototyping and virtual commissioning

Autores: Miriam Ugarte, Miren Illarramendi, Gorka Unamuno, Jose Luis Bellanco, Eneko Ugalde, Antonio Valor Valor
Publicado en: IET Collaborative Intelligent Manufacturing, 2022, ISSN 2516-8398
Editor: The Institutionf Engineering and Technology
DOI: 10.1049/cim2.12058

Towards Modular and Plug-and-Produce Manufacturing Apps

Autores: Agajan Torayev, Giovanna Martínez-Arellano, Jack C Chaplin, David Sanderson, Svetan Ratchev
Publicado en: Procedia CIRP, 2022, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2022.05.141

Online and Modular Energy Consumption Optimization of Industrial Robots

Autores: Agajan Torayev, Zi Wang, Giovanna Martínez-Arellano,, Jack C. Chaplin, David Sanderson, Svetan Ratchev
Publicado en: Journal: IEEE Transactions on Industrial Informatics, 2023, ISSN 1941-0050
Editor: IEEE
DOI: 10.1109/tii.2023.3272692

Structured dataset of human-machine interactions enabling adaptive user interfaces

Autores: Carrera-Rivera, A., Reguera-Bakhache, D., Larrinaga, F. , Lasa, G.
Publicado en: Scientific Data 10, 831 (2023). , 2023, ISSN 2052-4463
Editor: Scientific Data
DOI: 10.1038/s41597-023-02741-8

Human-centred design in industry 4.0: case study review and opportunities for future research

Autores: Hien Nguyen Ngoc, Ganix Lasa, Ion Iriarte
Publicado en: Journal of Intelligent Manufacturing, Edición Vol 32, 2021, ISSN 0956-5515
Editor: Kluwer Academic Publishers
DOI: 10.1007/s10845-021-01796-x

A framework for manufacturing system reconfiguration and optimisation utilising digital twins and modular artificial intelligence

Autores: Fan Mo, Hamood Ur Rehman, Fabio Marco Monetti, Jack C. Chaplin, David Sanderson, Atanas Popov, Antonio Maffei, Svetan Ratchev
Publicado en: Robotics and Computer Integrated Manufacturing, 2023, ISSN 1879-2537
Editor: Elsevier
DOI: 10.1016/j.rcim.2022.102524

An Altruistic-Based Framework to Support Collaborative Healing of Manufacturing Resources in a Self-Organized Shop-Floor

Autores: Estrada-Jimenez Luis A, Sepideh Kalateh, Nikghadam-Hojjati Sanaz, Barata Jose.
Publicado en: IEEE Access, Edición Volume 12, 2024, Página(s) 4282-4300, ISSN 2169-3536
Editor: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/access.2024.3349508

Beyond assembly features: Systematic review of the core concepts and perspectives towards a unified approach to assembly information representation

Autores: Nathaly Rea Minango, Antonio Maffei
Publicado en: Research in Engineering Design Journal, 2022, ISSN 1435-6066
Editor: Springer
DOI: 10.1007/s00163-022-00400-4

Cyber-Physical Systems for Micro-/Nano-assembly Operations: a Survey

Autores: Jose A Mulet Alberola, Irene Fassi
Publicado en: Current Robotics Reports, Edición 2/1, 2021, Página(s) 33-41, ISSN 2662-4087
Editor: Springer
DOI: 10.1007/s43154-020-00041-2

Agent-based manufacturing — review and expert evaluation

Autores: Terrin Pulikottil; Luis A. Estrada-Jimenez; Hamood Ur Rehman; Fan Mo; Sanaz Nikghadam-Hojjati; Jose Barata
Publicado en: The International Journal of Advanced Manufacturing Technology, Edición Volume 127, 2023, Página(s) 2151–2180, ISSN 0268-3768
Editor: Springer Verlag
DOI: 10.1007/s00170-023-11517-8

Context-Awareness for the Design of Smart-Product Service Systems: Literature Review

Autores: Angela I. Carrasco, Felix Larrinaga, Ganix Lasa
Publicado en: Computers in Industry, 2022, ISSN 1872-6194
Editor: Elseveier
DOI: 10.1016/j.compind.2022.103730

Human-centered design for advanced services: a multi-dimensional designmethodology

Autores: Hien Nguyen Ngoc, Ganix Lasa, Ion Iriarte, Ariane Atxa, Gorka Unamuno, Gurutz Galfarsoro
Publicado en: Advanced Engineering Informatics, 2022, ISSN 1873-5320
Editor: ScienceDirect
DOI: 10.1016/j.aei.2022.101720

A maturity model for the autonomy of manufacturing systems

Autores: Fan Mo, Fabio Marco Monetti, Agajan Torayev, Hamood Ur Rehman, Jose A. Mulet Alberola, Nathaly Rea Minango, Hien Ngoc Nguyen, Antonio Maffei & Jack C. Chaplin
Publicado en: International Journal of Advanced Manufacturing Technology, 2023, ISSN 1433-3015
Editor: Springer

Integration of Cutting-Edge Interoperability Approaches in Cyber-Physical Production Systems and Industry 4.0

Autores: Luis Alberto Estrada-Jimenez, Terrin Pulikottil, Nguyen Ngoc Hien, Agajan Torayev, Hamood Ur Rehman, Fan Mo, Sanaz Nikghadam Hojjati, José Barata
Publicado en: Design, Applications, and Maintenance of Cyber-Physical Systems, 2021, Página(s) 144-172, ISBN 9781799867210
Editor: IGI Global
DOI: 10.4018/978-1-7998-6721-0.ch007

Buscando datos de OpenAIRE...

Resultado final

Publicaciones

Compartir esta página Compartir esta página en las redes sociales

Descargar Descargar el contenido de la página