Digital Manufacturing and Design Training Network

CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.

Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .

Rezultaty

Pros / Cons on the Integration of Agents' Technology in Manufacturing

Pros / Cons on the Integration of Agents’ Technology in Manufacturing

Dissemination plan
Advanced approaches for Diagnosis, Monitoring and Security tasks in CPS
Intermediate coordination report

Summary to commission of all activities of the network. It includes reporting about management, training, recruitment, dissemination/exploitation, as well as scientific activities.

CPS State-of-the-art analysis and requirements specification

Deliverable with the analysis of the state-of-the-art and the requirement specification for CPS

Using agents to perform Control and Configuration roles in Industry
Summary of journal and conference papers published by ESRs
Updated dissemination plan

Review and update dissemination plan

Guide to develop and deploy CPS resources

A comprehensive manual that can guide industrial practitioners in the development and deployment of CPS

State-of-the-art on Integration of cutting edge interoperability approaches in Manufacturing and Cyber Safety and Security requirements
Using Big-Data in Industry - Challenges and Approaches

Using Big-Data in Industry – Challenges and Approaches

Progress report

Progress report as base for the Project check to be held at M14. It includes reporting about management, training, recruitment, dissemination/exploitation, as well as scientific activities.

CPS Architecture

CPS Architecture that provides the necessary framework for the development of CPS

Data Management Plan M30

Updated Data Management Plan M36

Data Management Plan M6

Data Management Plan

"School #4"

"School #4: Mixed Reality systems event"

"School #2"

"School #2: Distributed Agent Control event"

"School #3"

"School #3: Cyber Safety and Security event"

Dissemination and Exploitation conference
Supervisory Board of the network

Supervisory Board of the network formed

Industry Fact Sheets Year 2

Publication of Industry Fact Sheets Year 2

Industry Fact Sheets Year 3

Publication of Industry Fact Sheets Year 3

Project website

Project website established: describing the project, aims and objectives and inviting wider participation

Industry Fact Sheets Year 4

Publication of Industry Fact Sheets Year 4

DiManD newsletter Year 4

Publication of DiManD newsletter Year 4

DiManD newsletter Year 1

Publication of DiManD newsletter Year 1

DiManD newsletter Year 2

Publication of DiManD newsletter Year 2

DiManD newsletter Year 3

Publication of DiManD newsletter Year 3

Services to support analysis, business models

Self-contained and combinable services to support analysis of production performance, monitoring and optimisation activities

Results of Test Cases

A pilot will be developed and tested to integrate the techniques and technologies studied and researched in the previous tasks.

Publikacje

A Framework for Manufacturing System Reconfiguration Based on Artificial Intelligence and Digital Twin

Autorzy: Mo, Fan; Chaplin, Jack C.; Sanderson, David; Rehman, Hamood Ur; Monetti, Fabio Marco; Maffei, Antonio; Ratchev, Svetan
Opublikowane w: Lecture Notes in Mechanical Engineering ISBN: 9783031183256, 2022, ISSN 2195-4364
Wydawca: Springer, Cham
DOI: 10.1007/978-3-031-18326-3_35

Human-Centred Design in the context of Servitization in Industry 4.0: A Collaborative Approach

Autorzy: Nguyen Ngoc, Hien Lasa Erle, Ganix Iriarte Azpiazu, Ion
Opublikowane w: 30th RESER International Congress., Numer 11, 2021
Wydawca: RESER International Congress

Service Based Approach to Asset Administration Shell for Controlling Testing Processes in Manufacturing

Autorzy: Hamood Ur Rehman, Jack C. Chaplin, Leszek Zarzycki, Fan Mo, Mark Jones, Svetan Ratchev
Opublikowane w: 10th IFAC Conference on Manufacturing Modelling, Management and Control, 2022
Wydawca: IFAC-PapersOnLine / ELSEVEIER

Cloud Based Decision Making for Multi-agent Production Systems

Autorzy: Hamood Ur Rehman, Terrin Pulikottil, Luis Alberto Estrada-Jimenez, Fan Mo, Jack C. Chaplin, Jose Barata, Svetan Ratchev
Opublikowane w: Progress in Artificial Intelligence - 20th EPIA Conference on Artificial Intelligence, EPIA 2021, Virtual Event, September 7–9, 2021, Proceedings, Numer 12981, 2021, Strona(/y) 673-686, ISBN 978-3-030-86229-9
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-030-86230-5_53

A Bio-inspired and Altruistic-Based Framework to Support Collaborative Healing in a Smart Manufacturing Shop-Floor

Autorzy: Estrada-Jimenez, L.A., Kalateh, S., Hojjati, S.N., Barata, J.
Opublikowane w: 14th Advanced Doctoral Conference On Computing, Electrical And Industrial Systems, 2023
Wydawca: Springer

Towards quasi-static kinematic calibration of serial articulated industrial manipulators

Autorzy: Nikolas Theissen Fabio Marco Monetti Monica Gonzalez Antonio Maffei
Opublikowane w: The 30th Mediterranean Conference on Control and Automation, 2022, ISBN 978-1-6654-0674-1
Wydawca: IEEE
DOI: 10.1109/med54222.2022.9837167

Efficient Decision-Making in SMEs: Leveraging Knowledge Graphs with Neo4j and AI Vision

Autorzy: Mo, Fan.;Ur Rehman, Hamood;Elshafei, Basem;Chaplin, Jack C.;Sanderson, David;Martínez-Arellano, Giovanna;Ratchev, Svetan
Opublikowane w: Low-Cost Digital Solutions for Industrial Automation (LoDiSA 2023), 2023, Strona(/y) 69 - 75, ISBN 978-1-83953-932-9
Wydawca: IET Conference Proceedings
DOI: 10.1049/icp.2023.1736

Predictive Manufacturing: Enabling Technologies, Frameworks and Applications

Autorzy: Terrin Pulikottil, Luis Alberto Estrada-Jimenez, Sanaz Nikghadam-Hojjati, Jose Barata
Opublikowane w: Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2021, 2021
Wydawca: Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2021
DOI: 10.1007/978-3-030-78288-7_5

Functional information integration in product development by using assembly features

Autorzy: Nathaly Rea Minangoa, Antonio Maffei
Opublikowane w: 33rd CIRP Design Conference, 2023
Wydawca: Elsevier
DOI: 10.1016/j.procir.2023.03.095

Characteristics of Adaptable Control of Production Systems and the Role of Self-Organization towards Smart Manufacturing

Autorzy: Luis Alberto Estrada-Jimenez, Sanaz Nikghadam-Hojjati, Jose Barata
Opublikowane w: Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2021, 2021
Wydawca: Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2021
DOI: 10.1007/978-3-030-78288-7_4

A digital twin framework for the simulation and optimization of production systems

Autorzy: Itziar Ricondo, Alain Porto, Miriam Ugarte
Opublikowane w: Procedia CIRP, Numer 104, 2021, Strona(/y) 762-767, ISSN 2212-8271
Wydawca: ScienceDirect
DOI: 10.1016/j.procir.2021.11.128

Complexity theory and self-organization in Cyber-Physical Production Systems

Autorzy: Luis Alberto Estrada-Jimenez, Terrin Pulikottil, Ricardo Silva Peres, Sanaz Nikghadam-Hojjati, Jose Barata
Opublikowane w: 54th CIRP Conference on Manufacturing Systems, Numer Volume 104, 2021, 2021, Strona(/y) 1831-1836, ISSN 2212-8271
Wydawca: ScienceDirect
DOI: 10.1016/j.procir.2021.11.309

Towards a DevOps Approach in Cyber Physical Production Systems Using Digital Twins

Autorzy: Miriam Ugarte Querejeta, Leire Etxeberria, Goiuria Sagardui
Opublikowane w: Computer Safety, Reliability, and Security. SAFECOMP 2020 Workshops - DECSoS 2020, DepDevOps 2020, USDAI 2020, and WAISE 2020, Lisbon, Portugal, September 15, 2020, Proceedings, Numer 12235, 2020, Strona(/y) 205-216, ISBN 978-3-030-55582-5
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-030-55583-2_15

Identification and Categorization of Assembly Information for Collaborative Product Realization

Autorzy: Nathaly Rea Minango, Mariam Nafisi, Mikael Hedlind, Antonio Maffei
Opublikowane w: 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (https://carv2020.com/), 2021
Wydawca: Andersen AL. et al. (eds) Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems. CARV 2021, MCPC 2021.
DOI: 10.1007/978-3-030-90700-6_65

Towards the assessment of performance-based interactions in collaborative CPPS

Autorzy: Jose Antonio Mulet Alberola, Irene Fassi
Opublikowane w: ISM 2021, 2022
Wydawca: Procedia Computer Science
DOI: 10.1016/j.procs.2022.01.364

Hyperspectral imaging for non-destructive testing of composite materials and defect classification

Autorzy: Trunal Patil, Claudia Pagano, Roberto Marani, Tiziana D'Orazio, Giacomo Copani, Irene Fassi
Opublikowane w: Lecture Notes in Mechanical Engineering, Numer Flexible Automation and Intelligent Manufacturing International Conference, 2022, Strona(/y) 404-412, ISBN 978-3-031-18325-6
Wydawca: Springer Link
DOI: 10.1007/978-3-031-18326-3_39

A Systematic Literature Review: Key Performance Indicators on Feeding-as-a-Service

Autorzy: Fabio Marco Monetti, Marco Bertoni, Antonio Maffei
Opublikowane w: Advances in Transdisciplinary Engineering, 2024., 2024, ISBN 978-1-64368-510-6
Wydawca: IOS Press
DOI: 10.3233/atde240170

Assessing the relationships between interdigital geometry quality and inkjet printing parameters

Autorzy: Federico Bertolucci, Nicolò Berdozzi, Lara Rebaioli, Trunal Patil, Rocco Vertechy, Irene Fassi
Opublikowane w: Micromachines, 2022, ISSN 2072-666X
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi13010057

An experimental study of the impact of virtual reality training on manufacturing operators on industrial robotic tasks

Autorzy: F.M. Monetti, A. de Giorgio, H.Yu, A. Maffei, M.Romero
Opublikowane w: Procedia CIRP, 2022
Wydawca: Elsevier
DOI: 10.1016/j.procir.2022.02.151

Multi-agent based manufacturing: current trends and challenges

Autorzy: Terrin Pulikottil, Luis Alberto Estrada-Jimenez,Hamood Ur Rehman, Jose Barata, Sanaz Nikghadam-Hojjati, Leszek Zarzycki
Opublikowane w: ETFA 2021 : 26th IEEE International Conference on Emerging Technologies and Factory Automation, 2021
Wydawca: ETFA 2021 : 26th IEEE International Conference on Emerging Technologies and Factory Automation

Using physical interfaces for product design: from design to assembly planning

Autorzy: Nathaly Rea Minango; Antonio Maffei
Opublikowane w: 56th CIRP Conference on Manufacturing Systems, Numer Volume 120, 2023, Strona(/y) 1303-1308, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2023.09.167

Search-based Test Case Selection for PLC Systems using Functional Block Diagram Programs

Autorzy: Miriam Ugarte, Eunkyoung Jee, Lingjun Liu, Pablo Valle, Aitor Arrieta, Miren Illarramendi
Opublikowane w: 2023 IEEE 34th International Symposium on Software Reliability Engineering (ISSRE), 2023
Wydawca: IEEE
DOI: 10.1109/issre59848.2023.00040

Exploring the limitations and potential of digital twins for mobile manipulators in industry

Autorzy: Dario Antonelli, Khurshid Aliev, Marco Soriano, Kousay Samir, Fabio Marco Monetti, Antonio Maffei
Opublikowane w: 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM 2023), 2023
Wydawca: Elsevier
DOI: 10.1016/j.procs.2024.01.110

Exploring the transformation of user interactions to Adaptive Human-Machine Interfaces

Autorzy: Carrera-Rivera, Angela; Reguera-Bakhache, Daniel; Larrinaga, Felix; Lasa, Ganix
Opublikowane w: Interaccion '23: Proceedings of the XXIII International Conference on Human Computer Interaction, 2024, ISBN 979-8-4007-0790-2
Wydawca: Association for Computing Machinery
DOI: 10.1145/3612783.3612807

An overview of Industry 4.0 Applications for Advanced Maintenance Services

Autorzy: Nguyen Ngoc Hien, Ganix Lasaa, Ion Iriarte,, Gorka Unamuno
Opublikowane w: International Conference on Industry 4.0 and Smart Manufacturing, 2022
Wydawca: Published by Elsevier B.V
DOI: 10.1016/j.procs.2022.01.277

Optimal Manufacturing Configuration Selection: Sequential Decision Making and Optimization using Reinforcement Learning

Autorzy: Agajan Torayev, Jose Joaquin Peralta Abadia, Giovanna Martínez-Arellano, Mikel Cuesta, Jack C Chaplin, Felix Larrinaga, David Sanderson, Pedro-José Arrazola, Svetan Ratchev
Opublikowane w: 56th CIRP Conference on Manufacturing Systems Procedia CIRP, 2023, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2023.09.112

A meta-learning strategy based on deep ensemble learning for tool condition monitoring of machining processes

Autorzy: Jose Joaquin Peralta Abadia, Mikel Cuesta Zabaljauregui, Felix Larrinaga Barrenechea
Opublikowane w: 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 2023
Wydawca: Elsevier

Simulation of corona electrostatic separator for end-of-life management in printed circuit boards

Autorzy: Trunal Patil, Lara Rebaioli, Irene Fassi
Opublikowane w: IDETC/CIE 2021 - ASME 2021 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference., 2021
Wydawca: IDETC/CIE 2021 - ASME 2021 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference.

Feeding-as-a-Service in a cloud manufacturing environment

Autorzy: Fabio Marco Monetti, Antonio Maffei
Opublikowane w: 56th CIRP Conference on Manufacturing Systems, CIRP CMS ‘23, 2023
Wydawca: Elsevier
DOI: 10.1016/j.procir.2023.09.181

Conceptual framework for smart maintenance based on distributed intelligence

Autorzy: Terrin Pulikottil, Luis A. Estrada-Jimenez, Jose Barata
Opublikowane w: 5th IFAC Workshop on Advanced Maintenance Engineering, Services and Technology, 26-29 July 2022, Bogota, 2022
Wydawca: Elsevier
DOI: 10.1016/j.ifacol.2022.09.194

UX- for Smart-PSS: Towards a Context-Aware Framework

Autorzy: Angela Isabel Carrera-Rivera,Felix Larrinaga, Ganix Lasa, Giovanna Martinez-Arellano
Opublikowane w: CHIRA - 6th International Conference on Computer-Human Interaction Research and Applications, 2022
Wydawca: SCITEPRESS
DOI: 10.5220/0011379700003323

Implementation of Digital Twin-based Virtual Commissioning in Machine Tool Manufacturing

Autorzy: Miriam Ugarte Querejeta, Gorka Unamuno, Jose Luis Bellanco, Eneko Ugalde
Opublikowane w: 2022
Wydawca: International Conference on Industry 4.0 and Smart Manufacturing
DOI: 10.1016/j.procs.2022.01.250

Optimal Selection of Manufacturing Configurations using Object-Oriented and Mathematical Data Models

Autorzy: Agajan Torayev, Zi Wang, Giovanna Martínez-Arellano,, Jack C. Chaplin, David Sanderson, Svetan Ratchev
Opublikowane w: International Conference on Industrial Engineering and Applications (ICIEA 2023), 2023, ISBN 978-1-64368-408-6
Wydawca: IOS Press
DOI: 10.3233/atde230025

How-to conduct a systematic literature review: A quick guide for computer science research

Autorzy: Angela Carrera-Rivera, William Ochoa, Felix Larrinaga, Ganix Lasa.
Opublikowane w: MethodsX, 2022, ISSN 2405-8963
Wydawca: Elsevier
DOI: 10.1016/j.mex.2022.101895

A Modular Artificial Intelligence and Asset Administration Shell Approach to Streamline Testing Processes in Manufacturing Services

Autorzy: Hamood Ur Rehmana, Fan Mo, Jack C. Chaplin, Leszek Zarzycki, Mark Jones, Svetan Ratchev
Opublikowane w: Journal of Manufacturing Systems, 2023, ISSN 0278-6125
Wydawca: Elsevier BV
DOI: 10.1016/j.jmsy.2023.12.004

Monitorización de estado de la herramienta en mecanizado mediante redes neuronales residuales robustas

Autorzy: Jose Joaquin Peralta Abadia, Mikel Cuesta Zabaljauregui, Felix Larrinaga Barrenechea
Opublikowane w: DYNA Ingeniería e Industria, Numer Accepted but not published yet, 2024, ISSN 0012-7361
Wydawca: Federacion de Asociaciones de Ingenieros Industriales de Espana

Analysis of interactive manufacturing systems: towards a performance-based assessment methodology

Autorzy: Jose A. Mulet Alberola, Irene Fassi
Opublikowane w: IET Collaborative Intelligent Manufacturing, 2022, ISSN 2516-8398
Wydawca: The Institution of Engineering and Technology.
DOI: 10.1049/cim2.12063

Datasets of skills-rating questionnaires for advanced service design through expert knowledge elicitation

Autorzy: Hien Nguyen Ngoc, Ganix Lasa, Ion Iriarte, Ariane Atxa, Gorka Unamuno, Gurutz Galfarsoro
Opublikowane w: Scientific Data, 2022, ISSN 2052-4463
Wydawca: Scientific Data
DOI: 10.1038/s41597-022-01421-3

Big Data Life Cycle in Shop-floor –Trends and Challenges

Autorzy: TERRIN PULIKOTTIL, LUIS A. ESTRADA-JIMENEZ, JOSÉ JOAQUÍN PERALTA ABADÍA, ANGELA CARRERA-RIVERA, AGAJAN TORAYEV,HAMOOD UR REHMAN, FAN MO, SANAZ NIKGHADAM-HOJJATI AND JOSE BARATA
Opublikowane w: IEEE Access Journal, 2023, ISSN 2169-3536
Wydawca: Institute of Electrical and Electronics Engineers Inc.

VIRTUAL COMMISSIONING IN MACHINE TOOL MANUFACTURING: A SURVEY FROM INDUSTRY

Autorzy: Miriam Ugarte Querejeta, LEIRE ETXEBERRIA ELORZA, GOIURIA SAGARDUI MENDIETA, GORKA UNAMUNO EGUREN, IÑIGO BEDIAGA ESCUDERO
Opublikowane w: DYNA, Numer 96/6, 2021, Strona(/y) 612-619, ISSN 1989-1490
Wydawca: DYNA
DOI: 10.6036/10244

Towards the definition of assembly-oriented modular product architectures: a systematic review

Autorzy: Fabio Marco Monetti; Antonio Maffei
Opublikowane w: Research in Engineering Design Journal, Numer Volume 30, 2024, Strona(/y) 137–169, ISSN 0934-9839
Wydawca: Springer Verlag
DOI: 10.1007/s00163-023-00427-1

Cyber-Physical Systems for End-of-Life management of Printed Circuit Boards and Mechatronics products in Home Automation: A review

Autorzy: Trunal Patil, Lara Rebaioli, Irene Fassi
Opublikowane w: Sustainable Materials and Technologies, 2022, ISSN 2214-9937
Wydawca: ScienceDirect
DOI: 10.1016/j.susmat.2022.e00422

Self-organization in Smart Manufacturing - Background, Systematic Review, Challenges and Outlook

Autorzy: Luis Alberto Estrada-Jimenez, Terrin Babu Pulikottil, Sanaz Nikghadam-Hojjati & Jose Barata
Opublikowane w: IEEE Access, 2023, ISSN 2169-3536
Wydawca: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/access.2023.3240433

Development of a new set of Heuristics for the evaluation of Human-Robot Interaction in industrial settings: Heuristics Robots Experience (HEUROBOX)

Autorzy: Ainhoa Apraiz, Jose Antonio Mulet Alberola, Ganix Lasa, Maitane Mazmela, Hien Ngoc Nguyen
Opublikowane w: Frontiers in Robotics and AI, Numer Volume 10, 2023, ISSN 2296-9144
Wydawca: Frontiers
DOI: 10.3389/frobt.2023.1227082

Immune system inspired smart maintenance framework: Tool wear monitoring use case

Autorzy: Terrin Pulikottil; Giovanna Martínez-Arellano; Jose Barata
Opublikowane w: The International Journal of Advanced Manufacturing Technology, Numer 132, 2024, Strona(/y) 4699-4721, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-024-13472-4

Semantic models and knowledge graphs as manufacturing system reconfiguration enablers

Autorzy: Fan Mo, Jack C. Chaplin, David Sanderson, Giovanna Martínez-Arellano, Svetan Ratchev
Opublikowane w: Robotics and Computer-Integrated Manufacturing, 2024, ISSN 0736-5845
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.rcim.2023.102625

PLC Orchestration Automation to enhance Human-Machine Integration in Adaptive

Autorzy: Fan Mo, Miriam Ugarte Querejeta, Joseph Hellewell, Hamood Ur Rehman, Miren Illarramendi Rezabal, Jack C. Chaplin, David Sanderson,Svetan Ratchev
Opublikowane w: Journal of Manufacturing Systems, 2023, ISSN 0278-6125
Wydawca: Elsevier BV
DOI: 10.1016/j.jmsy.2023.07.015

Implementation of a holistic digital twin solution for design prototyping and virtual commissioning

Autorzy: Miriam Ugarte, Miren Illarramendi, Gorka Unamuno, Jose Luis Bellanco, Eneko Ugalde, Antonio Valor Valor
Opublikowane w: IET Collaborative Intelligent Manufacturing, 2022, ISSN 2516-8398
Wydawca: The Institutionf Engineering and Technology
DOI: 10.1049/cim2.12058

Towards Modular and Plug-and-Produce Manufacturing Apps

Autorzy: Agajan Torayev, Giovanna Martínez-Arellano, Jack C Chaplin, David Sanderson, Svetan Ratchev
Opublikowane w: Procedia CIRP, 2022, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2022.05.141

Online and Modular Energy Consumption Optimization of Industrial Robots

Autorzy: Agajan Torayev, Zi Wang, Giovanna Martínez-Arellano,, Jack C. Chaplin, David Sanderson, Svetan Ratchev
Opublikowane w: Journal: IEEE Transactions on Industrial Informatics, 2023, ISSN 1941-0050
Wydawca: IEEE
DOI: 10.1109/tii.2023.3272692

Structured dataset of human-machine interactions enabling adaptive user interfaces

Autorzy: Carrera-Rivera, A., Reguera-Bakhache, D., Larrinaga, F. , Lasa, G.
Opublikowane w: Scientific Data 10, 831 (2023). , 2023, ISSN 2052-4463
Wydawca: Scientific Data
DOI: 10.1038/s41597-023-02741-8

Human-centred design in industry 4.0: case study review and opportunities for future research

Autorzy: Hien Nguyen Ngoc, Ganix Lasa, Ion Iriarte
Opublikowane w: Journal of Intelligent Manufacturing, Numer Vol 32, 2021, ISSN 0956-5515
Wydawca: Kluwer Academic Publishers
DOI: 10.1007/s10845-021-01796-x

A framework for manufacturing system reconfiguration and optimisation utilising digital twins and modular artificial intelligence

Autorzy: Fan Mo, Hamood Ur Rehman, Fabio Marco Monetti, Jack C. Chaplin, David Sanderson, Atanas Popov, Antonio Maffei, Svetan Ratchev
Opublikowane w: Robotics and Computer Integrated Manufacturing, 2023, ISSN 1879-2537
Wydawca: Elsevier
DOI: 10.1016/j.rcim.2022.102524

An Altruistic-Based Framework to Support Collaborative Healing of Manufacturing Resources in a Self-Organized Shop-Floor

Autorzy: Estrada-Jimenez Luis A, Sepideh Kalateh, Nikghadam-Hojjati Sanaz, Barata Jose.
Opublikowane w: IEEE Access, Numer Volume 12, 2024, Strona(/y) 4282-4300, ISSN 2169-3536
Wydawca: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/access.2024.3349508

Beyond assembly features: Systematic review of the core concepts and perspectives towards a unified approach to assembly information representation

Autorzy: Nathaly Rea Minango, Antonio Maffei
Opublikowane w: Research in Engineering Design Journal, 2022, ISSN 1435-6066
Wydawca: Springer
DOI: 10.1007/s00163-022-00400-4

Cyber-Physical Systems for Micro-/Nano-assembly Operations: a Survey

Autorzy: Jose A Mulet Alberola, Irene Fassi
Opublikowane w: Current Robotics Reports, Numer 2/1, 2021, Strona(/y) 33-41, ISSN 2662-4087
Wydawca: Springer
DOI: 10.1007/s43154-020-00041-2

Agent-based manufacturing — review and expert evaluation

Autorzy: Terrin Pulikottil; Luis A. Estrada-Jimenez; Hamood Ur Rehman; Fan Mo; Sanaz Nikghadam-Hojjati; Jose Barata
Opublikowane w: The International Journal of Advanced Manufacturing Technology, Numer Volume 127, 2023, Strona(/y) 2151–2180, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-023-11517-8

Context-Awareness for the Design of Smart-Product Service Systems: Literature Review

Autorzy: Angela I. Carrasco, Felix Larrinaga, Ganix Lasa
Opublikowane w: Computers in Industry, 2022, ISSN 1872-6194
Wydawca: Elseveier
DOI: 10.1016/j.compind.2022.103730

Human-centered design for advanced services: a multi-dimensional designmethodology

Autorzy: Hien Nguyen Ngoc, Ganix Lasa, Ion Iriarte, Ariane Atxa, Gorka Unamuno, Gurutz Galfarsoro
Opublikowane w: Advanced Engineering Informatics, 2022, ISSN 1873-5320
Wydawca: ScienceDirect
DOI: 10.1016/j.aei.2022.101720

A maturity model for the autonomy of manufacturing systems

Autorzy: Fan Mo, Fabio Marco Monetti, Agajan Torayev, Hamood Ur Rehman, Jose A. Mulet Alberola, Nathaly Rea Minango, Hien Ngoc Nguyen, Antonio Maffei & Jack C. Chaplin
Opublikowane w: International Journal of Advanced Manufacturing Technology, 2023, ISSN 1433-3015
Wydawca: Springer

Integration of Cutting-Edge Interoperability Approaches in Cyber-Physical Production Systems and Industry 4.0

Autorzy: Luis Alberto Estrada-Jimenez, Terrin Pulikottil, Nguyen Ngoc Hien, Agajan Torayev, Hamood Ur Rehman, Fan Mo, Sanaz Nikghadam Hojjati, José Barata
Opublikowane w: Design, Applications, and Maintenance of Cyber-Physical Systems, 2021, Strona(/y) 144-172, ISBN 9781799867210
Wydawca: IGI Global
DOI: 10.4018/978-1-7998-6721-0.ch007

Wyszukiwanie danych OpenAIRE...

Rezultaty

Publikacje

Udostępnij tę stronę Udostępnij tę stronę w mediach społecznościowych

Pobierz Pobierz zawartość strony