DIGItal MANufacturing Technologies for Zero-defect Industry 4.0 Production

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

DIGIMAN 4.0 manufacturing handbook
ESR scientific publications

DIGIMAN 4.0 Session at Multi-Material Micro Manuf. Conf. (4M/ICOMM)
ESRs open positions advertisement

ESRs open positions advertisement

Calendar of seminars, lectures, presentations and list of publications

Calendar of seminars, lectures, presentations and list of publications (updates: M12, M18, M24, M30, M36, M42, M48, M54, M60)

ESR PhD degrees

DIGIMAN 4.0 public project website and DIGIMAN 4.0 LinkedIn profile
Videos from selected technological workshops

Videos from selected technological workshops - M30, M48

Publicaciones

Design and development of a not actively driven modular device for parts feeding and sorting

Autores: Edoardo Bianchi, Oliver Jonas Jorg, Gualtiero Fantoni, Francisco Javier Brosed Dueso, José A. Yagüe-Fabra
Publicado en: Mechanics Based Design of Structures and Machines, Edición 52, 2024, Página(s) 10124-10147, ISSN 1539-7734
Editor: Marcel Dekker Inc.
DOI: 10.1080/15397734.2024.2353326

Study of Augmented Reality Based Manufacturing for Further Integration of Quality Control 4.0: A Systematic Literature Review

Autores: Phuong Thao Ho, José Antonio Albajez, Jorge Santolaria and José A. Yagüe-Fabra
Publicado en: Applied Sciences, Edición 12(4), 2022, Página(s) 1961, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app12041961

Low-Cost Digitalization Solution through Scalable IIoT Prototypes

Autores: Marko Vuković, Oliver Jorg, Mohammadamin Hosseinifard, Gualtiero Fantoni
Publicado en: Applied Sciences, 2022, ISSN 2076-3417
Editor: Applied Sciences
DOI: 10.3390/app12178571

Decentralized Multi-Agent Production Control through Economic Model Bidding for Matrix Production Systems

Autores: May, Marvin Carl; Kiefer, Lars; Kuhnle, Andreas; Stricker, Nicole; Lanza, Gisela
Publicado en: Procedia CIRP, Edición Volume 96, 2021, 2021, Página(s) 3-8, ISSN 2212-8271
Editor: Elsevier
DOI: 10.5445/ir/1000129694

Automating Production Process Data Acquisition Towards Spaghetti Chart 4.0

Autores: null null, Salam Qaddoori Dawood Al-Zubaidi, Elena Coli, null null, Gualtiero Fantoni, null null
Publicado en: International Journal of Industrial Engineering and Management, Edición 13, 2022, Página(s) 145-158, ISSN 2217-2661
Editor: University of Novi Sad, Faculty of Technical Sciences
DOI: 10.24867/ijiem-2022-3-308

Queue Length Forecasting in Complex Manufacturing Job Shops

Autores: Marvin Carl May; Alexander Albers; Marc David Fischer; Florian Mayerhofer; Louis Schäfer; Gisela Lanza
Publicado en: Forecasting, Edición 25719394, 2021, Página(s) 322-338, ISSN 2571-9394
Editor: MDPI
DOI: 10.5445/ir/1000145418

Operator-centred Lean 4.0 framework for flexible assembly lines

Autores: Adrian Miqueo, Marta Torralba, José A Yagüe-Fabra
Publicado en: Procedia CIRP, Edición 22128271, 2021, Página(s) 440-445, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2021.11.074

Towards the integration of additively manufactured photopolymer dies in the polymer profile extrusion process chain

Autores: A. Turazza, A. Davoudinejad, M. Calaon, D.B. Pedersen, G. Tosello
Publicado en: Procedia CIRP, Edición 93, 2020, Página(s) 3-8, ISSN 2212-8271
Editor: Elsevier B.V.
DOI: 10.1016/j.procir.2020.06.005

A survey on generative adversarial networks for imbalance problems in computer vision tasks

Autores: Vignesh Sampath, Iñaki Maurtua, Juan José Aguilar Martín, Aitor Gutierrez
Publicado en: Journal of Big Data, Edición 8/1, 2021, Página(s) 1-59, ISSN 2196-1115
Editor: SpringerOpen
DOI: 10.1186/s40537-021-00414-0

Lean manual assembly 4.0: A systematic review

Autores: Miqueo, A.; Torralba, M.; Yagüe-Fabra, J.A.
Publicado en: reponame:Zaguán. Repositorio Digital de la Universidad de Zaragoza, Edición Appl. Sci. 2020, 10(23), 2020, Página(s) 8555, ISSN 2076-3417
Editor: MDPI

Enabling Micro Injection Moulding Using a Soft Tooling Process Chain with Inserts Made of Mortar Material.

Autores: Kilian Krüger; M. Kain; Yang Zhang; David Bue Pedersen; Matteo Calaon; Guido Tosello; Hans Nørgaard Hansen
Publicado en: Micromachines, Edición 12(8), 857, 2021, ISSN 2072-666X
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi12080857

Application of Machine Learning for Prediction and Process Optimization—Case Study of Blush Defect in Plastic Injection Molding

Autores: Alireza Mollaei Ardestani; Ghasem Azamirad; Yasin Shokrollahi; Matteo Calaon; Jesper Henri Hattel; Murat Kulahci; Roya Soltani; Guido Tosello
Publicado en: Applied Sciences, special issue; Advances in Sustainable and Digitalized Factories: Manufacturing, Measuring Technologies and Systems), Edición 13(4), 2617, 2023, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app13042617

Managing product-inherent constraints with artificial intelligence: production control for time constraints in semiconductor manufacturing

Autores: Marvin Carl May, Jan Oberst, Gisela Lanza
Publicado en: Journal of Intelligent Manufacturing, Edición 35, 2024, Página(s) 4259-4276, ISSN 0956-5515
Editor: Kluwer Academic Publishers
DOI: 10.1007/s10845-024-02472-6

Labour productivity in mixed-model manual assembly 4.0

Autores: A Miqueo; M Martín; M Torralba; J A Yagüe
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición 1757899X, 2021, Página(s) 012104, ISSN 1757-899X
Editor: IOP Publishing
DOI: 10.1088/1757-899x/1193/1/012104

Product Generation Module: Automated Production Planning for optimized workload and increased efficiency in Matrix Production Systems

Autores: May, Marvin Carl; Schmidt, Simon; Kuhnle, Andreas; Stricker, Nicole; Lanza, Gisela
Publicado en: Procedia CIRP, Edición Volume 96, 2021, 2021, Página(s) 45-50, ISSN 2212-8271
Editor: Elsevier
DOI: 10.5445/ir/1000129695

Modeling and simulation of surface generation in manufacturing

Autores: Guido Tosello; Giuliano Bissacco; Jian Cao; Dragos Axinte
Publicado en: CIRP Annals - Manufacturing Technology, Edición 72/2, 2023, Página(s) 753-779, ISSN 0007-8506
Editor: Hallwag AG
DOI: 10.1016/j.cirp.2023.05.002

Latest Advancements in Micro Nano Molding Technologies—Process Developments and Optimization, Materials, Applications, Key Enabling Technologies

Autores: Guido Tosello
Publicado en: Tosello , G 2022 , ' Latest Advancements in Micro Nano Molding Technologies-Process Developments and Optimization, Materials, Applications, Key Enabling Technologies ' , Micromachines , vol. 13 , no. 4 , 609 . https://doi.org/10.3390/mi13040609, Edición 7, 2022, ISSN 2072-666X
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi13040609

Multi-Model In-Plant Logistics Using Milkruns for Flexible Assembly Systems under Disturbances: An Industry Study Case

Autores: A Miqueo, M Gracia-Cadarso, M Torralba, F Gil-Vilda, JA Yagüe-Fabra
Publicado en: Machines, Edición 11(1), 2023, Página(s) 66, ISSN 2075-1702
Editor: MDPI
DOI: 10.3390/machines11010066

A novel underactuated smart surface for parts feeding and sorting

Autores: Edoardo Bianchi, Gualtiero Fantoni, Francisco Javier Brosed Dueso, José A. Yagüe-Fabra
Publicado en: The International Journal of Advanced Manufacturing Technology, Edición 135, 2024, Página(s) 1221-1239, ISSN 0268-3768
Editor: Springer Verlag
DOI: 10.1007/s00170-024-14591-8

Machine Learning in Manufacturing towards Industry 4.0: From ‘For Now’ to ‘Four-Know’

Autores: Tingting Chen; Vignesh Sampath; Marvin Carl May; Shuo Shan; Oliver Jonas Jorg; Juan José Aguilar Martín; Florian Stamer; Gualtiero Fantoni; Guido Tosello; Matteo Calaon
Publicado en: applied sciences, Edición 13(3), 2023, ISSN 2076-3417
Editor: MDPI
DOI: 10.5445/ir/1000156346

Digitale Produktion und intelligente Steuerung

Autores: May, Marvin Carl; Kuhnle, Andreas; Lanza, Gisela
Publicado en: wt Werkstattstechnik online, Edición 110 (4), 2020, Página(s) 255-260, ISSN 1436-4980
Editor: VDI Fachmedien GmbH & Co. KG
DOI: 10.5445/IR/1000119555

Design, Development and Testing of Feeding Grippers for Vegetable Plug Transplanters

Autores: Oliver Jonas Jorg, Mino Sportelli, Marco Fontanelli, Christian Frasconi, Michele Raffaelli, and Gualtiero Fantoni
Publicado en: AgriEngineering, Edición 3(3) 2021, 2021, Página(s) 669-680, ISSN 2624-7402
Editor: MDPI
DOI: 10.3390/agriengineering3030043

Pattern Recognition in Multivariate Time Series: Towards an Automated Event Detection Method for Smart Manufacturing Systems

Autores: Vadim Kapp; Marvin Carl May; Gisela Lanza; Thorsten Wuest
Publicado en: Journal of Manufacturing and Materials Processing, Edición Vol 4, Iss 88, 2020, Página(s) 88, ISSN 2504-4494
Editor: MDPI
DOI: 10.3390/jmmp4030088

Parallel Walking-Worker Flexible Assembly Lines for High-Mix Low-Volume Demand

Autores: A Miqueo, JA Yagüe-Fabra, M Torralba, MJ Oliveros, G Tosello
Publicado en: Processes, Edición 11(1), 2023, Página(s) 172, ISSN 2227-9717
Editor: MDPI
DOI: 10.3390/pr11010172

Anomaly Detection in Float-Zone Crystal Growth of Silicon

Autores: TingtingChen, GuidoTosello, NicoWerner, MatteoCalaon
Publicado en: Procedia CIRP, Edición 22128271, 2022, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2022.05.184

Integration of soft tooling by additive manufacturing in polymer profile extrusion process chain

Autores: A.H. Aimon, S. Singh, D.B. Pedersen, G. Tosello, M. Calaon
Publicado en: Materials & Design, Edición 243, 2024, Página(s) 113065, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2024.113065

A branch-and-bound approach to minimise the value-at-risk of the makespan in a stochastic two-machine flow shop

Autores: Lei Liu, Marcello Urgo
Publicado en: International Journal of Production Research, Edición 62, 2024, Página(s) 2107-2123, ISSN 0020-7543
Editor: Taylor & Francis
DOI: 10.1080/00207543.2023.2217279

Labour Productivity in Mixed-model Manual Assembly Changeovers

Autores: Adrian Miqueo, Marta Torralba, José Antonio Yagüe
Publicado en: Jornada de Jóvenes Investigadores del I3A, Edición 8, 2020, ISSN 2341-4790
Editor: University of Zaragoza (Spain)
DOI: 10.26754/jjii3a.4916

Multi-label oxide classification in float-zone silicon crystal growth using transfer learning and asymmetric loss

Autores: Tingting Chen, Guido Tosello, and Matteo Calaon
Publicado en: Journal of Intelligent Manufacturing, 2024, ISSN 0956-5515
Editor: Kluwer Academic Publishers
DOI: 10.1007/s10845-023-02302-1

Intraclass image augmentation for defect detection using generative adversarial neural networks

Autores: Vignesh Sampath; Iñaki Maurtua; Juan José Aguilar Martín; Ander Iriondo; Iker Lluvia; Gotzone Aizpurua
Publicado en: Sensors, Edición Sensors 2023, 23(4), 1861, 2023, ISSN 1424-8220
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s23041861

Design, development and test of a novel broach for long polypropylene tubes

Autores: OliverJorg, GualtieroFantoni
Publicado en: Precision Engineering, Edición Volume 74, March 2022, 2021, Página(s) 224-231, ISSN 0141-6359
Editor: Elsevier BV
DOI: 10.1016/j.precisioneng.2021.11.012

Models to evaluate the performance of high-mix low-volume manual or semi-automatic assembly lines

Autores: Adrian Miqueo, Marta Torralba, José A Yagüe-Fabra
Publicado en: Procedia CIRP, Edición 22128271, 2022, Página(s) 1461-1466, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2022.05.175

Applying frequency based forecasting for resource allocation

Autores: Marvin Carl May, Lars Kiefer, Alex Frey, Neil Duffie, Gisela Lanza
Publicado en: Procedia CIRP, Edición 120, 2023, Página(s) 147-152, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2023.08.027

RFID Technology as a Low-Cost and PassiveWay to DigitizeIndustrial Analogic Indicators

Autores: Mohammadamin Hosseinifard, Salam Alzubaidi, Andrea Michel, Gualtiero Fantoni
Publicado en: Applied Sciences, Edición 2022, 12, 1451, 2022, Página(s) 15, ISSN 2076-3417
Editor: Basel: MDPI AG, 2011-
DOI: 10.3390/app12031451

Indirect force measurement system in a mechanical microgripper

Autores: Gualtiero Fantoni, Oliver Jorg, Vinicio Tincani
Publicado en: Precision Engineering, Edición Volume 78, November 2022, 2022, Página(s) 206-214, ISSN 0141-6359
Editor: Elsevier BV
DOI: 10.1016/j.precisioneng.2022.08.004

Advances in Sustainable and Digitalized Factories: Manufacturing, Measuring Technologies and Systems

Autores: Roque Calvo; José A. Yagüe-Fabra; Guido Tosello
Publicado en: Special Edición 'Advances in Sustainable and Digitalized Factories: Manufacturing, Measuring Technologies and Systems', Applied Sciences, Edición vol. 13, no. 9, 5570, 2023, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app13095570

Functional Analysis Validation of Micro and Conventional Injection Molding Machines Performances Based on Process Precision and Accuracy for Micro Manufacturing

Autores: Matteo Calaon, Federico Baruffi, Gualtiero Fantoni, Ilenia Cirri, Marco Santochi, Hans Nørgaard Hansen, Guido Tosello
Publicado en: Micromachines, Edición 11, 2024, Página(s) 1115, ISSN 2072-666X
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi11121115

In-Plane Material Handling: A Systematic Review

Autores: Edoardo Bianchi, Francisco Javier Brosed Dueso, José A. Yagüe-Fabra
Publicado en: Applied Sciences, Edición 14, 2024, Página(s) 7302, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app14167302

Lean Manual Assembly 4.0: A Systematic Review

Autores: Adrian Miqueo, Marta Torralba, José A. Yagüe-Fabra
Publicado en: Applied Sciences, Edición 10/23, 2020, Página(s) 8555, ISSN 2076-3417
Editor: Applied Sciences
DOI: 10.3390/app10238555

RF Energy Harvesting Techniques for Battery-Less Wireless Sensing, Industry 4.0, and Internet of Things: A Review

Autores: Gholamhosein Moloudian Wireless Sensor Network Group, Tyndall National Institute, University College Cork, Cork, Ireland Mohammadamin Hosseinifard Department of Civil and Industrial Engineering, University of Pisa, Pisa, Italy Sanjeev Kumar Wireless Sensor Network Group, Tyndall National Institute, University College Cork, Cork, Ireland Roy B. V. B. Simorangkir Wireless Sensor Network Group, Tynda
Publicado en: IEEE Sensor, Edición vol. 24, no. 5, pp. 5732-5745, 1 March1, 2024, 2024, Página(s) 5732-5745, ISSN 1530-437X
Editor: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsen.2024.3352402

Integration of multimodal data and explainable artificial intelligence for root cause analysis in manufacturing processes

Autores: Matteo Calaon, Tingting Chen, Guido Tosello
Publicado en: CIRP Annals, Edición 73, 2024, Página(s) 365-368, ISSN 0007-8506
Editor: Hallwag AG
DOI: 10.1016/j.cirp.2024.04.014

Fast development cycle for the design of industrial grippers

Autores: OliverJorg, Gualtiero Fantoni
Publicado en: Procedia CIRP, Edición Volume 100, 2021, Página(s) 211-216, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2021.05.057

A Robust Scheduling Framework for Re-Manufacturing Activities of Turbine Blades

Autores: Lei Liu, Marcello Urgo
Publicado en: Applied Sciences, 2022, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app12063034

Robust scheduling of remanufacturing processes for the repair of turbine blades

Autores: Lei Liu Marcello Urgo
Publicado en: CIRP Annals, 2023, ISSN 1726-0604
Editor: Elsevier USA
DOI: 10.1016/j.cirp.2023.03.033

Attention Guided Multi-Task Learning for Surface defect identification

Autores: Vignesh Sampath; Inaki Maurtua; Juan Jose Aguilar Martin; Andoni Rivera; Jorge Molina; Aitor Gutierrez
Publicado en: IEEE Transactions on Industrial Informatics, Edición 1-9, 2023, ISSN 1551-3203
Editor: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tii.2023.3234030

Ontology-Based Production Simulation with OntologySim

Autores: Marvin Carl May; Lars Kiefer; Andreas Kuhnle; Gisela Lanza
Publicado en: applied sciences, Edición 20763417, 2022, Página(s) 1608, ISSN 2076-3417
Editor: MDPI
DOI: 10.5445/ir/1000143283

A branch-and-bound approach to minimise the value-at-risk of the makespan in a stochastic two-machine flow shop

Autores: Lei Liu Marcello Urgo
Publicado en: International Journal of Production Research, 2023, ISSN 0020-7543
Editor: Taylor & Francis
DOI: 10.1080/00207543.2023.2217279

Study and Simulation of an Under-Actuated Smart Surface for Material Flow Handling

Autores: Edoardo Bianchi; Oliver Jonas Jorg; Gualtiero Fantoni; Francisco Javier Brosed Brosed Dueso; José A. Yagüe-Fabra
Publicado en: applied sciences, Edición 13(3), 1937, 2023, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app13031937

Flow simulation and experimental validation of polymer extrusion using additively manufactured carbon fiber reinforced PEEK dies

Autores: A.H. Aimon, G. Tosello, D.B. Pedersen, M. Calaon
Publicado en: Procedia CIRP, Edición 120, 2023, Página(s) 1481-1486
Editor: Elsevier B.V.
DOI: 10.1016/j.procir.2023.09.198

Data analytics for time constraint adherence prediction in a semiconductor manufacturing use-case

Autores: Marvin Carl May, Sören Maucher, Andrea Holzer, Andreas Kuhnle, Gisela Lanza
Publicado en: Procedia CIRP, 2021, Página(s) Pages 49-54
Editor: Elsevier
DOI: 10.1016/j.procir.2021.05.008

Influence of surface roughness parameters of additively manufactured die on the extrudates in polymer extrusion

Autores: A. H. Aimon, G. Tosello, D. B. Pedersen, M. Calaon
Publicado en: Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing, 2023
Editor: Euspen

Dynamical simulation of an under-actuated surface composed by spherical rotors during sorting operations

Autores: Edoardo Bianchi, Oliver Jonas Jorg, Gualtiero Fantoni, Francisco Javier Brosed Dueso, José Antonio Yagüe-Fabra
Publicado en: 2023, ISBN 199899913-2
Editor: Euspen

Preliminary study of Augmented Reality based manufacturing for further integration of Quality Control 4.0 supported by metrology

Autores: P T Ho, J A Albajez, J A Yagüe, J Santolaria
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición 1193/1, 2021, Página(s) 012105, ISSN 1757-8981
Editor: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1193/1/012105

Additive manufacturing in polymer extrusion tooling: experimental testing and surface characterization

Autores: Arhimny H. Aimon, Matteo Todaro, David B. Pedersen, Matteo Calaon
Publicado en: 38th American Society for Precision Engineering Annual Meeting, Edición 12 Nov 2023- 17 Nov 2023, 2023
Editor: ASPE

A development approach for a standardized quality data model using asset administration shell technology in the context of autonomous quality control loops for manufacturing processes

Autores: Ali Bilen, Florian Stamer, Marvin Carl May, Gisela Lanza
Publicado en: European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 23rd International Conference and Exhibition, EUSPEN 2023, Edición 2023, 2023, Página(s) 443-446, ISBN 9781998999132
Editor: euspen

Metal Additive Manufacturing of Multi-Material Dental Strut Implants

Autores: M. Kain, V. K. Nadimpalli, A. Miqueo, M. C. May, J. A. Yagüe-Fabra, B. Häfner, D. B. Pedersen, M. Calaon, G. Tosello
Publicado en: Proceedings of EUSPEN 2020 International Conference, Edición Proceedings of EUSPEN 2020 International Conference, 2020
Editor: EUSPEN - European Society for Precision Engineering and Nanotechnology
DOI: 10.5281/zenodo.4587184

Automated Derivation of Optimal Production Sequences from Product Data

Autores: Louis Schäfer, Antonia Frank, Marvin Carl May, Gisela Lanza
Publicado en: Procedia CIRP, 2022, Página(s) Pages 469-474
Editor: Elsevier
DOI: 10.1016/j.procir.2022.05.010

Design of a Test Bench to Measure In-Plane Friction Forces Produced by a New Under-Actuated Modular Device

Autores: Edoardo Bianchi, Oliver Jonas Jorg, Gualtiero Fantoni, Francisco Javier Brosed Dueso, José Antonio Yagüe-Fabra
Publicado en: 10th Manufacturing Engineering Society International Conference (MESIC), 2023, Página(s) 155-164
Editor: Scientific.Net
DOI: 10.4028/p-d8pgks

Uncertainty evaluation of diameter measurement in float-zone crystal growth production

Autores: Tingting Chen, Guido Tosello, Lars Conrad-Hansen, Matteo Calaon
Publicado en: European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 23rd International Conference and Exhibition, EUSPEN 2023, Edición 12/06/2023-16/06/2023, 2023, Página(s) 179-180
Editor: euspen

Augmented Reality in Industrial Manufacturing - Identification of Application Areas for AR-Based Quality Control/Assembly Based on Technology Suitability

Autores: Phuong Thao Ho, José Antonio Albajez, Jorge Santolaria Mazo, José Antonio Yagüe-Fabra
Publicado en: Advances in Science and Technology, Edición Volume 132, 2023, Página(s) 233-240
Editor: Trans Tech Publications Ltd
DOI: 10.4028/p-6wb7q2

Towards Product-Production-CoDesign for the Production of the Future

Autores: Marvin Carl May, Louis Schäfer, Alex Frey, Carmen Krahe, Gisela Lanza
Publicado en: Procedia CIRP, Edición 119, 2023, Página(s) 944-949
Editor: Elsevier
DOI: 10.1016/j.procir.2023.02.172

Vision-based diameter estimation for continuous float-zone silicon crystal growth production

Autores: Tingting Chen, Guido Tosello, Nico Werner, Matteo Calaon
Publicado en: European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 22nd International Conference and Exhibition, EUSPEN 2022, Edición 30/05/2022-03/06/2022, 2022, Página(s) 419-422
Editor: euspen

Dimensional Evaluation of Additive Manufactured Polymer Extrusion Dies Produced by Continuous Liquid Interface Production

Autores: A. Turazza, A. Davoudinejad, M. Calaon, D. B. Pedersen, G. Tosello
Publicado en: Proceedings of EUSPEN 2020 International Conference, Edición Proceedings of EUSPEN 2020 International Conference, 2020
Editor: EUSPEN - European Society for Precision Engineering and Nanotechnology
DOI: 10.5281/zenodo.4587158

Experimental characterization and evaluation of additively manufactured PEEK dies for polymer profile extrusion

Autores: Aimon, A. H.; Martin Kain; Radhakrishnan, U. M.; David Bue Pedersen; Guido, Tosello; Matteo Calaon
Publicado en: Euspen Proceeding 2022, Edición 30 May-3June 2022, 2022
Editor: Euspen Proceeding

Applying Natural Language Processing in Manufacturing

Autores: Marvin Carl May, Jan Neidhöfer, Tom Körner, Louis Schäfer, Gisela Lanza
Publicado en: Procedia CIRP, 2022, Página(s) Pages 184-189
Editor: Elsevier
DOI: 10.1016/j.procir.2022.10.071

Experimental testing and characterization of additively manufactured CF-PEEK dies for complex profile in polymer profile extrusion

Autores: A. H. Aimon, G. Tosello, D. B. Pedersen, M. Calaon
Publicado en: European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 23rd International Conference and Exhibition, EUSPEN 2023, Edición 12-16 June 2023, 2023, Página(s) 93-94
Editor: Euspen 2023

Foresighted digital twin for situational agent selection in production control

Autores: Marvin Carl May, Leonard Overbeck, Marco Wurster, Andreas Kuhnle, Gisela Lanza
Publicado en: Procedia CIRP, 2021, Página(s) Pages 27-32
Editor: Elsevier
DOI: 10.1016/j.procir.2021.03.005

Multi-variate time-series for time constraint adherence prediction in complex job shops

Autores: Marvin Carl May, Lukas Behnen, Andrea Holzer, Andreas Kuhnle,Gisela Lanza
Publicado en: Procedia CIRP, 2021, Página(s) Pages 55-60
Editor: Elsevier
DOI: 10.1016/j.procir.2021.10.008

Precision Injection Moulding with Inserts made of Mortar Material

Autores: Krüger, Kilian; Regi, Francesco; Calaon, Matteo; Pedersen, David B.; Tosello, Guido
Publicado en: European Society for Precision Engineering and Nanotechnology - Special Interest Group Meeting: Micro/Nano Manufacturing, Edición Proceedings of the EUSPEN SIG Meeting Micro/Nano Manufacturing 2019, 2019
Editor: European Society for Precision Engineering and Nanotechnology (EUSPEN)
DOI: 10.5281/zenodo.4587599

Digital Twin for Factories: Challenges and Industrial Applications

Autores: Walter Terkaj, Massimiliano Annoni, Beatriz Olarte Martinez, Elena Pessot, Marco Sortino & Marcello Urgo
Publicado en: Selected Topics in Manufacturing, Edición Emerging Trends from the Perspective of AITeM's Young Researchers, 2024
Editor: Springer
DOI: 10.1007/978-3-031-41163-2_13

Scheduling Remanufacturing Activities for the Repair of Turbine Blades: An Approximate Branch and Bound Approach to Minimize a Risk Measure

Autores: Lei Liu, Marcello Urgo
Publicado en: Lecture Notes in Mechanical Engineering, Selected Topics in Manufacturing, Edición Vol. 2, 2023, Página(s) 41-59, ISBN 978-3-030-82626-0
Editor: Springer International Publishing
DOI: 10.1007/978-3-030-82627-7_3

Scheduling Remanufacturing Activities for the Repair of Turbine Blades: An Approximate Branch and Bound Approach to Minimize a Risk Measure

Autores: Lei Liu, Marcello Urgo
Publicado en: Selected Topics in Manufacturing, 2022
Editor: Springer
DOI: 10.1007/978-3-030-82627-7_3

Deep Learning Algorithms in Industry 4.0; Application of Surface defect inspection for quality control

Autores: Sampath, Vignesh; Maurtua Ormaetxea, Iñaki; Aguilar Martín, Juan José
Publicado en: reponame:Zaguán. Repositorio Digital de la Universidad de Zaragoza, Edición 11 07 2023, Thesis-Univ. Zaragoza, 2023
Editor: University of Zaragoza

Productivity and flexibility improvement of assembly lines for high-mix low-volume production. A white goods industry case

Autores: Miqueo Delgado, Adrián; Torralba Gracia, Marta; Yagüe Fabra, José Antonio
Publicado en: reponame:Zaguán. Repositorio Digital de la Universidad de Zaragoza, Edición 03 05 2023, Thesis-Univ. Zaragoza, , 2023, 2023
Editor: Univ. Zaragoza

Buscando datos de OpenAIRE...

Resultado final

Publicaciones

Compartir esta página Compartir esta página en las redes sociales

Descargar Descargar el contenido de la página