DIGItal MANufacturing Technologies for Zero-defect Industry 4.0 Production

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

DIGIMAN 4.0 manufacturing handbook
ESR scientific publications

DIGIMAN 4.0 Session at Multi-Material Micro Manuf. Conf. (4M/ICOMM)
ESRs open positions advertisement

ESRs open positions advertisement

Calendar of seminars, lectures, presentations and list of publications

Calendar of seminars, lectures, presentations and list of publications (updates: M12, M18, M24, M30, M36, M42, M48, M54, M60)

ESR PhD degrees

DIGIMAN 4.0 public project website and DIGIMAN 4.0 LinkedIn profile
Videos from selected technological workshops

Videos from selected technological workshops - M30, M48

Pubblicazioni

Design and development of a not actively driven modular device for parts feeding and sorting

Autori: Edoardo Bianchi, Oliver Jonas Jorg, Gualtiero Fantoni, Francisco Javier Brosed Dueso, José A. Yagüe-Fabra
Pubblicato in: Mechanics Based Design of Structures and Machines, Numero 52, 2024, Pagina/e 10124-10147, ISSN 1539-7734
Editore: Marcel Dekker Inc.
DOI: 10.1080/15397734.2024.2353326

Study of Augmented Reality Based Manufacturing for Further Integration of Quality Control 4.0: A Systematic Literature Review

Autori: Phuong Thao Ho, José Antonio Albajez, Jorge Santolaria and José A. Yagüe-Fabra
Pubblicato in: Applied Sciences, Numero 12(4), 2022, Pagina/e 1961, ISSN 2076-3417
Editore: MDPI
DOI: 10.3390/app12041961

Low-Cost Digitalization Solution through Scalable IIoT Prototypes

Autori: Marko Vuković, Oliver Jorg, Mohammadamin Hosseinifard, Gualtiero Fantoni
Pubblicato in: Applied Sciences, 2022, ISSN 2076-3417
Editore: Applied Sciences
DOI: 10.3390/app12178571

Decentralized Multi-Agent Production Control through Economic Model Bidding for Matrix Production Systems

Autori: May, Marvin Carl; Kiefer, Lars; Kuhnle, Andreas; Stricker, Nicole; Lanza, Gisela
Pubblicato in: Procedia CIRP, Numero Volume 96, 2021, 2021, Pagina/e 3-8, ISSN 2212-8271
Editore: Elsevier
DOI: 10.5445/ir/1000129694

Automating Production Process Data Acquisition Towards Spaghetti Chart 4.0

Autori: null null, Salam Qaddoori Dawood Al-Zubaidi, Elena Coli, null null, Gualtiero Fantoni, null null
Pubblicato in: International Journal of Industrial Engineering and Management, Numero 13, 2022, Pagina/e 145-158, ISSN 2217-2661
Editore: University of Novi Sad, Faculty of Technical Sciences
DOI: 10.24867/ijiem-2022-3-308

Queue Length Forecasting in Complex Manufacturing Job Shops

Autori: Marvin Carl May; Alexander Albers; Marc David Fischer; Florian Mayerhofer; Louis Schäfer; Gisela Lanza
Pubblicato in: Forecasting, Numero 25719394, 2021, Pagina/e 322-338, ISSN 2571-9394
Editore: MDPI
DOI: 10.5445/ir/1000145418

Operator-centred Lean 4.0 framework for flexible assembly lines

Autori: Adrian Miqueo, Marta Torralba, José A Yagüe-Fabra
Pubblicato in: Procedia CIRP, Numero 22128271, 2021, Pagina/e 440-445, ISSN 2212-8271
Editore: Elsevier
DOI: 10.1016/j.procir.2021.11.074

Towards the integration of additively manufactured photopolymer dies in the polymer profile extrusion process chain

Autori: A. Turazza, A. Davoudinejad, M. Calaon, D.B. Pedersen, G. Tosello
Pubblicato in: Procedia CIRP, Numero 93, 2020, Pagina/e 3-8, ISSN 2212-8271
Editore: Elsevier B.V.
DOI: 10.1016/j.procir.2020.06.005

A survey on generative adversarial networks for imbalance problems in computer vision tasks

Autori: Vignesh Sampath, Iñaki Maurtua, Juan José Aguilar Martín, Aitor Gutierrez
Pubblicato in: Journal of Big Data, Numero 8/1, 2021, Pagina/e 1-59, ISSN 2196-1115
Editore: SpringerOpen
DOI: 10.1186/s40537-021-00414-0

Lean manual assembly 4.0: A systematic review

Autori: Miqueo, A.; Torralba, M.; Yagüe-Fabra, J.A.
Pubblicato in: reponame:Zaguán. Repositorio Digital de la Universidad de Zaragoza, Numero Appl. Sci. 2020, 10(23), 2020, Pagina/e 8555, ISSN 2076-3417
Editore: MDPI

Enabling Micro Injection Moulding Using a Soft Tooling Process Chain with Inserts Made of Mortar Material.

Autori: Kilian Krüger; M. Kain; Yang Zhang; David Bue Pedersen; Matteo Calaon; Guido Tosello; Hans Nørgaard Hansen
Pubblicato in: Micromachines, Numero 12(8), 857, 2021, ISSN 2072-666X
Editore: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi12080857

Application of Machine Learning for Prediction and Process Optimization—Case Study of Blush Defect in Plastic Injection Molding

Autori: Alireza Mollaei Ardestani; Ghasem Azamirad; Yasin Shokrollahi; Matteo Calaon; Jesper Henri Hattel; Murat Kulahci; Roya Soltani; Guido Tosello
Pubblicato in: Applied Sciences, special issue; Advances in Sustainable and Digitalized Factories: Manufacturing, Measuring Technologies and Systems), Numero 13(4), 2617, 2023, ISSN 2076-3417
Editore: MDPI
DOI: 10.3390/app13042617

Managing product-inherent constraints with artificial intelligence: production control for time constraints in semiconductor manufacturing

Autori: Marvin Carl May, Jan Oberst, Gisela Lanza
Pubblicato in: Journal of Intelligent Manufacturing, Numero 35, 2024, Pagina/e 4259-4276, ISSN 0956-5515
Editore: Kluwer Academic Publishers
DOI: 10.1007/s10845-024-02472-6

Labour productivity in mixed-model manual assembly 4.0

Autori: A Miqueo; M Martín; M Torralba; J A Yagüe
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero 1757899X, 2021, Pagina/e 012104, ISSN 1757-899X
Editore: IOP Publishing
DOI: 10.1088/1757-899x/1193/1/012104

Product Generation Module: Automated Production Planning for optimized workload and increased efficiency in Matrix Production Systems

Autori: May, Marvin Carl; Schmidt, Simon; Kuhnle, Andreas; Stricker, Nicole; Lanza, Gisela
Pubblicato in: Procedia CIRP, Numero Volume 96, 2021, 2021, Pagina/e 45-50, ISSN 2212-8271
Editore: Elsevier
DOI: 10.5445/ir/1000129695

Modeling and simulation of surface generation in manufacturing

Autori: Guido Tosello; Giuliano Bissacco; Jian Cao; Dragos Axinte
Pubblicato in: CIRP Annals - Manufacturing Technology, Numero 72/2, 2023, Pagina/e 753-779, ISSN 0007-8506
Editore: Hallwag AG
DOI: 10.1016/j.cirp.2023.05.002

Latest Advancements in Micro Nano Molding Technologies—Process Developments and Optimization, Materials, Applications, Key Enabling Technologies

Autori: Guido Tosello
Pubblicato in: Tosello , G 2022 , ' Latest Advancements in Micro Nano Molding Technologies-Process Developments and Optimization, Materials, Applications, Key Enabling Technologies ' , Micromachines , vol. 13 , no. 4 , 609 . https://doi.org/10.3390/mi13040609, Numero 7, 2022, ISSN 2072-666X
Editore: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi13040609

Multi-Model In-Plant Logistics Using Milkruns for Flexible Assembly Systems under Disturbances: An Industry Study Case

Autori: A Miqueo, M Gracia-Cadarso, M Torralba, F Gil-Vilda, JA Yagüe-Fabra
Pubblicato in: Machines, Numero 11(1), 2023, Pagina/e 66, ISSN 2075-1702
Editore: MDPI
DOI: 10.3390/machines11010066

A novel underactuated smart surface for parts feeding and sorting

Autori: Edoardo Bianchi, Gualtiero Fantoni, Francisco Javier Brosed Dueso, José A. Yagüe-Fabra
Pubblicato in: The International Journal of Advanced Manufacturing Technology, Numero 135, 2024, Pagina/e 1221-1239, ISSN 0268-3768
Editore: Springer Verlag
DOI: 10.1007/s00170-024-14591-8

Machine Learning in Manufacturing towards Industry 4.0: From ‘For Now’ to ‘Four-Know’

Autori: Tingting Chen; Vignesh Sampath; Marvin Carl May; Shuo Shan; Oliver Jonas Jorg; Juan José Aguilar Martín; Florian Stamer; Gualtiero Fantoni; Guido Tosello; Matteo Calaon
Pubblicato in: applied sciences, Numero 13(3), 2023, ISSN 2076-3417
Editore: MDPI
DOI: 10.5445/ir/1000156346

Digitale Produktion und intelligente Steuerung

Autori: May, Marvin Carl; Kuhnle, Andreas; Lanza, Gisela
Pubblicato in: wt Werkstattstechnik online, Numero 110 (4), 2020, Pagina/e 255-260, ISSN 1436-4980
Editore: VDI Fachmedien GmbH & Co. KG
DOI: 10.5445/IR/1000119555

Design, Development and Testing of Feeding Grippers for Vegetable Plug Transplanters

Autori: Oliver Jonas Jorg, Mino Sportelli, Marco Fontanelli, Christian Frasconi, Michele Raffaelli, and Gualtiero Fantoni
Pubblicato in: AgriEngineering, Numero 3(3) 2021, 2021, Pagina/e 669-680, ISSN 2624-7402
Editore: MDPI
DOI: 10.3390/agriengineering3030043

Pattern Recognition in Multivariate Time Series: Towards an Automated Event Detection Method for Smart Manufacturing Systems

Autori: Vadim Kapp; Marvin Carl May; Gisela Lanza; Thorsten Wuest
Pubblicato in: Journal of Manufacturing and Materials Processing, Numero Vol 4, Iss 88, 2020, Pagina/e 88, ISSN 2504-4494
Editore: MDPI
DOI: 10.3390/jmmp4030088

Parallel Walking-Worker Flexible Assembly Lines for High-Mix Low-Volume Demand

Autori: A Miqueo, JA Yagüe-Fabra, M Torralba, MJ Oliveros, G Tosello
Pubblicato in: Processes, Numero 11(1), 2023, Pagina/e 172, ISSN 2227-9717
Editore: MDPI
DOI: 10.3390/pr11010172

Anomaly Detection in Float-Zone Crystal Growth of Silicon

Autori: TingtingChen, GuidoTosello, NicoWerner, MatteoCalaon
Pubblicato in: Procedia CIRP, Numero 22128271, 2022, ISSN 2212-8271
Editore: Elsevier
DOI: 10.1016/j.procir.2022.05.184

Integration of soft tooling by additive manufacturing in polymer profile extrusion process chain

Autori: A.H. Aimon, S. Singh, D.B. Pedersen, G. Tosello, M. Calaon
Pubblicato in: Materials & Design, Numero 243, 2024, Pagina/e 113065, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.matdes.2024.113065

A branch-and-bound approach to minimise the value-at-risk of the makespan in a stochastic two-machine flow shop

Autori: Lei Liu, Marcello Urgo
Pubblicato in: International Journal of Production Research, Numero 62, 2024, Pagina/e 2107-2123, ISSN 0020-7543
Editore: Taylor & Francis
DOI: 10.1080/00207543.2023.2217279

Labour Productivity in Mixed-model Manual Assembly Changeovers

Autori: Adrian Miqueo, Marta Torralba, José Antonio Yagüe
Pubblicato in: Jornada de Jóvenes Investigadores del I3A, Numero 8, 2020, ISSN 2341-4790
Editore: University of Zaragoza (Spain)
DOI: 10.26754/jjii3a.4916

Multi-label oxide classification in float-zone silicon crystal growth using transfer learning and asymmetric loss

Autori: Tingting Chen, Guido Tosello, and Matteo Calaon
Pubblicato in: Journal of Intelligent Manufacturing, 2024, ISSN 0956-5515
Editore: Kluwer Academic Publishers
DOI: 10.1007/s10845-023-02302-1

Intraclass image augmentation for defect detection using generative adversarial neural networks

Autori: Vignesh Sampath; Iñaki Maurtua; Juan José Aguilar Martín; Ander Iriondo; Iker Lluvia; Gotzone Aizpurua
Pubblicato in: Sensors, Numero Sensors 2023, 23(4), 1861, 2023, ISSN 1424-8220
Editore: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s23041861

Design, development and test of a novel broach for long polypropylene tubes

Autori: OliverJorg, GualtieroFantoni
Pubblicato in: Precision Engineering, Numero Volume 74, March 2022, 2021, Pagina/e 224-231, ISSN 0141-6359
Editore: Elsevier BV
DOI: 10.1016/j.precisioneng.2021.11.012

Models to evaluate the performance of high-mix low-volume manual or semi-automatic assembly lines

Autori: Adrian Miqueo, Marta Torralba, José A Yagüe-Fabra
Pubblicato in: Procedia CIRP, Numero 22128271, 2022, Pagina/e 1461-1466, ISSN 2212-8271
Editore: Elsevier
DOI: 10.1016/j.procir.2022.05.175

Applying frequency based forecasting for resource allocation

Autori: Marvin Carl May, Lars Kiefer, Alex Frey, Neil Duffie, Gisela Lanza
Pubblicato in: Procedia CIRP, Numero 120, 2023, Pagina/e 147-152, ISSN 2212-8271
Editore: Elsevier
DOI: 10.1016/j.procir.2023.08.027

RFID Technology as a Low-Cost and PassiveWay to DigitizeIndustrial Analogic Indicators

Autori: Mohammadamin Hosseinifard, Salam Alzubaidi, Andrea Michel, Gualtiero Fantoni
Pubblicato in: Applied Sciences, Numero 2022, 12, 1451, 2022, Pagina/e 15, ISSN 2076-3417
Editore: Basel: MDPI AG, 2011-
DOI: 10.3390/app12031451

Indirect force measurement system in a mechanical microgripper

Autori: Gualtiero Fantoni, Oliver Jorg, Vinicio Tincani
Pubblicato in: Precision Engineering, Numero Volume 78, November 2022, 2022, Pagina/e 206-214, ISSN 0141-6359
Editore: Elsevier BV
DOI: 10.1016/j.precisioneng.2022.08.004

Advances in Sustainable and Digitalized Factories: Manufacturing, Measuring Technologies and Systems

Autori: Roque Calvo; José A. Yagüe-Fabra; Guido Tosello
Pubblicato in: Special Numero 'Advances in Sustainable and Digitalized Factories: Manufacturing, Measuring Technologies and Systems', Applied Sciences, Numero vol. 13, no. 9, 5570, 2023, ISSN 2076-3417
Editore: MDPI
DOI: 10.3390/app13095570

Functional Analysis Validation of Micro and Conventional Injection Molding Machines Performances Based on Process Precision and Accuracy for Micro Manufacturing

Autori: Matteo Calaon, Federico Baruffi, Gualtiero Fantoni, Ilenia Cirri, Marco Santochi, Hans Nørgaard Hansen, Guido Tosello
Pubblicato in: Micromachines, Numero 11, 2024, Pagina/e 1115, ISSN 2072-666X
Editore: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi11121115

In-Plane Material Handling: A Systematic Review

Autori: Edoardo Bianchi, Francisco Javier Brosed Dueso, José A. Yagüe-Fabra
Pubblicato in: Applied Sciences, Numero 14, 2024, Pagina/e 7302, ISSN 2076-3417
Editore: MDPI
DOI: 10.3390/app14167302

Lean Manual Assembly 4.0: A Systematic Review

Autori: Adrian Miqueo, Marta Torralba, José A. Yagüe-Fabra
Pubblicato in: Applied Sciences, Numero 10/23, 2020, Pagina/e 8555, ISSN 2076-3417
Editore: Applied Sciences
DOI: 10.3390/app10238555

RF Energy Harvesting Techniques for Battery-Less Wireless Sensing, Industry 4.0, and Internet of Things: A Review

Autori: Gholamhosein Moloudian Wireless Sensor Network Group, Tyndall National Institute, University College Cork, Cork, Ireland Mohammadamin Hosseinifard Department of Civil and Industrial Engineering, University of Pisa, Pisa, Italy Sanjeev Kumar Wireless Sensor Network Group, Tyndall National Institute, University College Cork, Cork, Ireland Roy B. V. B. Simorangkir Wireless Sensor Network Group, Tynda
Pubblicato in: IEEE Sensor, Numero vol. 24, no. 5, pp. 5732-5745, 1 March1, 2024, 2024, Pagina/e 5732-5745, ISSN 1530-437X
Editore: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsen.2024.3352402

Integration of multimodal data and explainable artificial intelligence for root cause analysis in manufacturing processes

Autori: Matteo Calaon, Tingting Chen, Guido Tosello
Pubblicato in: CIRP Annals, Numero 73, 2024, Pagina/e 365-368, ISSN 0007-8506
Editore: Hallwag AG
DOI: 10.1016/j.cirp.2024.04.014

Fast development cycle for the design of industrial grippers

Autori: OliverJorg, Gualtiero Fantoni
Pubblicato in: Procedia CIRP, Numero Volume 100, 2021, Pagina/e 211-216, ISSN 2212-8271
Editore: Elsevier
DOI: 10.1016/j.procir.2021.05.057

A Robust Scheduling Framework for Re-Manufacturing Activities of Turbine Blades

Autori: Lei Liu, Marcello Urgo
Pubblicato in: Applied Sciences, 2022, ISSN 2076-3417
Editore: MDPI
DOI: 10.3390/app12063034

Robust scheduling of remanufacturing processes for the repair of turbine blades

Autori: Lei Liu Marcello Urgo
Pubblicato in: CIRP Annals, 2023, ISSN 1726-0604
Editore: Elsevier USA
DOI: 10.1016/j.cirp.2023.03.033

Attention Guided Multi-Task Learning for Surface defect identification

Autori: Vignesh Sampath; Inaki Maurtua; Juan Jose Aguilar Martin; Andoni Rivera; Jorge Molina; Aitor Gutierrez
Pubblicato in: IEEE Transactions on Industrial Informatics, Numero 1-9, 2023, ISSN 1551-3203
Editore: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tii.2023.3234030

Ontology-Based Production Simulation with OntologySim

Autori: Marvin Carl May; Lars Kiefer; Andreas Kuhnle; Gisela Lanza
Pubblicato in: applied sciences, Numero 20763417, 2022, Pagina/e 1608, ISSN 2076-3417
Editore: MDPI
DOI: 10.5445/ir/1000143283

A branch-and-bound approach to minimise the value-at-risk of the makespan in a stochastic two-machine flow shop

Autori: Lei Liu Marcello Urgo
Pubblicato in: International Journal of Production Research, 2023, ISSN 0020-7543
Editore: Taylor & Francis
DOI: 10.1080/00207543.2023.2217279

Study and Simulation of an Under-Actuated Smart Surface for Material Flow Handling

Autori: Edoardo Bianchi; Oliver Jonas Jorg; Gualtiero Fantoni; Francisco Javier Brosed Brosed Dueso; José A. Yagüe-Fabra
Pubblicato in: applied sciences, Numero 13(3), 1937, 2023, ISSN 2076-3417
Editore: MDPI
DOI: 10.3390/app13031937

Flow simulation and experimental validation of polymer extrusion using additively manufactured carbon fiber reinforced PEEK dies

Autori: A.H. Aimon, G. Tosello, D.B. Pedersen, M. Calaon
Pubblicato in: Procedia CIRP, Numero 120, 2023, Pagina/e 1481-1486
Editore: Elsevier B.V.
DOI: 10.1016/j.procir.2023.09.198

Data analytics for time constraint adherence prediction in a semiconductor manufacturing use-case

Autori: Marvin Carl May, Sören Maucher, Andrea Holzer, Andreas Kuhnle, Gisela Lanza
Pubblicato in: Procedia CIRP, 2021, Pagina/e Pages 49-54
Editore: Elsevier
DOI: 10.1016/j.procir.2021.05.008

Influence of surface roughness parameters of additively manufactured die on the extrudates in polymer extrusion

Autori: A. H. Aimon, G. Tosello, D. B. Pedersen, M. Calaon
Pubblicato in: Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing, 2023
Editore: Euspen

Dynamical simulation of an under-actuated surface composed by spherical rotors during sorting operations

Autori: Edoardo Bianchi, Oliver Jonas Jorg, Gualtiero Fantoni, Francisco Javier Brosed Dueso, José Antonio Yagüe-Fabra
Pubblicato in: 2023, ISBN 199899913-2
Editore: Euspen

Preliminary study of Augmented Reality based manufacturing for further integration of Quality Control 4.0 supported by metrology

Autori: P T Ho, J A Albajez, J A Yagüe, J Santolaria
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero 1193/1, 2021, Pagina/e 012105, ISSN 1757-8981
Editore: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1193/1/012105

Additive manufacturing in polymer extrusion tooling: experimental testing and surface characterization

Autori: Arhimny H. Aimon, Matteo Todaro, David B. Pedersen, Matteo Calaon
Pubblicato in: 38th American Society for Precision Engineering Annual Meeting, Numero 12 Nov 2023- 17 Nov 2023, 2023
Editore: ASPE

A development approach for a standardized quality data model using asset administration shell technology in the context of autonomous quality control loops for manufacturing processes

Autori: Ali Bilen, Florian Stamer, Marvin Carl May, Gisela Lanza
Pubblicato in: European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 23rd International Conference and Exhibition, EUSPEN 2023, Numero 2023, 2023, Pagina/e 443-446, ISBN 9781998999132
Editore: euspen

Metal Additive Manufacturing of Multi-Material Dental Strut Implants

Autori: M. Kain, V. K. Nadimpalli, A. Miqueo, M. C. May, J. A. Yagüe-Fabra, B. Häfner, D. B. Pedersen, M. Calaon, G. Tosello
Pubblicato in: Proceedings of EUSPEN 2020 International Conference, Numero Proceedings of EUSPEN 2020 International Conference, 2020
Editore: EUSPEN - European Society for Precision Engineering and Nanotechnology
DOI: 10.5281/zenodo.4587184

Automated Derivation of Optimal Production Sequences from Product Data

Autori: Louis Schäfer, Antonia Frank, Marvin Carl May, Gisela Lanza
Pubblicato in: Procedia CIRP, 2022, Pagina/e Pages 469-474
Editore: Elsevier
DOI: 10.1016/j.procir.2022.05.010

Design of a Test Bench to Measure In-Plane Friction Forces Produced by a New Under-Actuated Modular Device

Autori: Edoardo Bianchi, Oliver Jonas Jorg, Gualtiero Fantoni, Francisco Javier Brosed Dueso, José Antonio Yagüe-Fabra
Pubblicato in: 10th Manufacturing Engineering Society International Conference (MESIC), 2023, Pagina/e 155-164
Editore: Scientific.Net
DOI: 10.4028/p-d8pgks

Uncertainty evaluation of diameter measurement in float-zone crystal growth production

Autori: Tingting Chen, Guido Tosello, Lars Conrad-Hansen, Matteo Calaon
Pubblicato in: European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 23rd International Conference and Exhibition, EUSPEN 2023, Numero 12/06/2023-16/06/2023, 2023, Pagina/e 179-180
Editore: euspen

Augmented Reality in Industrial Manufacturing - Identification of Application Areas for AR-Based Quality Control/Assembly Based on Technology Suitability

Autori: Phuong Thao Ho, José Antonio Albajez, Jorge Santolaria Mazo, José Antonio Yagüe-Fabra
Pubblicato in: Advances in Science and Technology, Numero Volume 132, 2023, Pagina/e 233-240
Editore: Trans Tech Publications Ltd
DOI: 10.4028/p-6wb7q2

Towards Product-Production-CoDesign for the Production of the Future

Autori: Marvin Carl May, Louis Schäfer, Alex Frey, Carmen Krahe, Gisela Lanza
Pubblicato in: Procedia CIRP, Numero 119, 2023, Pagina/e 944-949
Editore: Elsevier
DOI: 10.1016/j.procir.2023.02.172

Vision-based diameter estimation for continuous float-zone silicon crystal growth production

Autori: Tingting Chen, Guido Tosello, Nico Werner, Matteo Calaon
Pubblicato in: European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 22nd International Conference and Exhibition, EUSPEN 2022, Numero 30/05/2022-03/06/2022, 2022, Pagina/e 419-422
Editore: euspen

Dimensional Evaluation of Additive Manufactured Polymer Extrusion Dies Produced by Continuous Liquid Interface Production

Autori: A. Turazza, A. Davoudinejad, M. Calaon, D. B. Pedersen, G. Tosello
Pubblicato in: Proceedings of EUSPEN 2020 International Conference, Numero Proceedings of EUSPEN 2020 International Conference, 2020
Editore: EUSPEN - European Society for Precision Engineering and Nanotechnology
DOI: 10.5281/zenodo.4587158

Experimental characterization and evaluation of additively manufactured PEEK dies for polymer profile extrusion

Autori: Aimon, A. H.; Martin Kain; Radhakrishnan, U. M.; David Bue Pedersen; Guido, Tosello; Matteo Calaon
Pubblicato in: Euspen Proceeding 2022, Numero 30 May-3June 2022, 2022
Editore: Euspen Proceeding

Applying Natural Language Processing in Manufacturing

Autori: Marvin Carl May, Jan Neidhöfer, Tom Körner, Louis Schäfer, Gisela Lanza
Pubblicato in: Procedia CIRP, 2022, Pagina/e Pages 184-189
Editore: Elsevier
DOI: 10.1016/j.procir.2022.10.071

Experimental testing and characterization of additively manufactured CF-PEEK dies for complex profile in polymer profile extrusion

Autori: A. H. Aimon, G. Tosello, D. B. Pedersen, M. Calaon
Pubblicato in: European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 23rd International Conference and Exhibition, EUSPEN 2023, Numero 12-16 June 2023, 2023, Pagina/e 93-94
Editore: Euspen 2023

Foresighted digital twin for situational agent selection in production control

Autori: Marvin Carl May, Leonard Overbeck, Marco Wurster, Andreas Kuhnle, Gisela Lanza
Pubblicato in: Procedia CIRP, 2021, Pagina/e Pages 27-32
Editore: Elsevier
DOI: 10.1016/j.procir.2021.03.005

Multi-variate time-series for time constraint adherence prediction in complex job shops

Autori: Marvin Carl May, Lukas Behnen, Andrea Holzer, Andreas Kuhnle,Gisela Lanza
Pubblicato in: Procedia CIRP, 2021, Pagina/e Pages 55-60
Editore: Elsevier
DOI: 10.1016/j.procir.2021.10.008

Precision Injection Moulding with Inserts made of Mortar Material

Autori: Krüger, Kilian; Regi, Francesco; Calaon, Matteo; Pedersen, David B.; Tosello, Guido
Pubblicato in: European Society for Precision Engineering and Nanotechnology - Special Interest Group Meeting: Micro/Nano Manufacturing, Numero Proceedings of the EUSPEN SIG Meeting Micro/Nano Manufacturing 2019, 2019
Editore: European Society for Precision Engineering and Nanotechnology (EUSPEN)
DOI: 10.5281/zenodo.4587599

Digital Twin for Factories: Challenges and Industrial Applications

Autori: Walter Terkaj, Massimiliano Annoni, Beatriz Olarte Martinez, Elena Pessot, Marco Sortino & Marcello Urgo
Pubblicato in: Selected Topics in Manufacturing, Numero Emerging Trends from the Perspective of AITeM's Young Researchers, 2024
Editore: Springer
DOI: 10.1007/978-3-031-41163-2_13

Scheduling Remanufacturing Activities for the Repair of Turbine Blades: An Approximate Branch and Bound Approach to Minimize a Risk Measure

Autori: Lei Liu, Marcello Urgo
Pubblicato in: Lecture Notes in Mechanical Engineering, Selected Topics in Manufacturing, Numero Vol. 2, 2023, Pagina/e 41-59, ISBN 978-3-030-82626-0
Editore: Springer International Publishing
DOI: 10.1007/978-3-030-82627-7_3

Scheduling Remanufacturing Activities for the Repair of Turbine Blades: An Approximate Branch and Bound Approach to Minimize a Risk Measure

Autori: Lei Liu, Marcello Urgo
Pubblicato in: Selected Topics in Manufacturing, 2022
Editore: Springer
DOI: 10.1007/978-3-030-82627-7_3

Deep Learning Algorithms in Industry 4.0; Application of Surface defect inspection for quality control

Autori: Sampath, Vignesh; Maurtua Ormaetxea, Iñaki; Aguilar Martín, Juan José
Pubblicato in: reponame:Zaguán. Repositorio Digital de la Universidad de Zaragoza, Numero 11 07 2023, Thesis-Univ. Zaragoza, 2023
Editore: University of Zaragoza

Productivity and flexibility improvement of assembly lines for high-mix low-volume production. A white goods industry case

Autori: Miqueo Delgado, Adrián; Torralba Gracia, Marta; Yagüe Fabra, José Antonio
Pubblicato in: reponame:Zaguán. Repositorio Digital de la Universidad de Zaragoza, Numero 03 05 2023, Thesis-Univ. Zaragoza, , 2023, 2023
Editore: Univ. Zaragoza

È in corso la ricerca di dati su OpenAIRE...

Risultati finali

Pubblicazioni

Condividi questa pagina Condividi questa pagina sui social network

Scarica Scarica il contenuto della pagina