Skip to main content

ADvanced nanocomposite MAterIals fOr in situ treatment and ultRAsound-mediated management of osteoarthritis

Deliverables

Preliminary dissemination, communication and exploitation plan

Preliminary report of the preliminary dissemination, communication and exploitation plan

Report on 1st ADMAIORA workshop

Report on 1st ADMAIORA workshop

Project management handbook

Report of the project management handbook

Assembled innovative LIPUS stimulation set-ups

Demonstration of the assembled innovative LIPUS stimulation set-ups, and prototype testing

Pluronic-fibrinogen based hydrogel prototype development

Demonstration of Pluronic-fibrinogen based hydrogel prototypes

Preliminary brace skeleton

Demonstration of a preliminary brace skeleton prototype

PEG-fibrinogen based hydrogel prototype development

Demonstration of PEG-fibrinogen based hydrogel prototypes

Preliminary software structure

Demonstrator of a preliminary software structure

Preliminary foot-controlled pneumatic flow for bioprinting

Demonstration of a preliminary foot-controlled pneumatic system prototype for bioprinting

Selected components for the innovative LIPUS stimulation set-ups

Selection of the components for the innovative LIPUS stimulation set-ups, and report of their technical datasheets

Searching for OpenAIRE data...

Publications

Gellan gum/poly (ethylene glycol) di-acrylate hydrogels with tunable mechanical properties for articular cartilage engineering

Author(s): H. Al-Haddad, L. Vannozzi, D. Trucco, G. Lisignoli, L. Ricotti
Published in: TERMIS European Chapter Meeting, 2019

A ground-breaking approach for cartilage regeneration and osteoarthritis treatment: the ADMAIORA project

Author(s): Leonardo Ricotti
Published in: Nature Biomedical Engineering Conference, 2019

Non-invasive and quantitative assessment of tissues composition based on radio-frequency ultrasound data analysis

Author(s): A. Sorriento, A.Poliziani, A. Cafarelli, G.Valenza, L. Ricotti
Published in: Conference of the European Society for Artificial Organs (ESAO 2020), 2020

Biological evaluation of highly controlled low-intensity pulsed ultrasound stimulation set-ups

Author(s): F. Iacoponi, F. Iberite, F. Fontana, L. Ricotti
Published in: Conference of the European Society for Artificial Organs (ESAO 2020), 2020

Piezoelectric nanomaterials and ultrasound for tissue regeneration

Author(s): Laonardo Ricotti
Published in: International Engineering in Medicine and Biology Conference (EMBC 2019), 2019

Highly controlled and usable system for Low-Intensity Pulsed Ultrasound Stimulation of Cells

Author(s): F. Fontana, F. Iberite, L. Morchi, T. Pratellesi, A. Cafarelli, L. Ricotti
Published in: 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2019, Page(s) 2513-2516
DOI: 10.1109/embc.2019.8857772

Influence of substrate stiffness on human induced pluripotent stem cells: preliminary results*

Author(s): F. Iberite, M. Salerno, C. Canale, A. Rosa, L. Ricotti
Published in: 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2019, Page(s) 1039-1043
DOI: 10.1109/embc.2019.8857397

Gellan gum-based hydrogels as injectable materials for cartilage tissue engineering

Author(s): L. Riacci, L. Vannozzi, L. Garcia-Hevia, L. Ricotti
Published in: Seventh National Congress of BioEngineering, 2020

Nanocomposite thin films based on polyethylene vinyl acetate and piezoelectric nanomaterials

Author(s): L. Vannozzi, G. Mariotti, L. Ricotti
Published in: 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2019, Page(s) 1050-1053
DOI: 10.1109/EMBC.2019.8857556

Wear Behavior Characterization of Hydrogels Constructs for Cartilage Tissue Replacement

Author(s): Saverio Affatato, Diego Trucco, Paola Taddei, Lorenzo Vannozzi, Leonardo Ricotti, Gilbert Daniel Nessim, Gina Lisignoli
Published in: Materials, Issue 14/2, 2021, Page(s) 428, ISSN 1996-1944
DOI: 10.3390/ma14020428

Novel Ultrathin Films Based on a Blend of PEG- b -PCL and PLLA and Doped with ZnO Nanoparticles

Author(s): Lorenzo Vannozzi, Pedro Gouveia, Pasqualantonio Pingue, Claudio Canale, Leonardo Ricotti
Published in: ACS Applied Materials & Interfaces, Issue 12/19, 2020, Page(s) 21398-21410, ISSN 1944-8244
DOI: 10.1021/acsami.0c00154

Fabrication, Characterization, and Properties of Poly (Ethylene-Co-Vinyl Acetate) Composite Thin Films Doped with Piezoelectric Nanofillers

Author(s): Giulia Mariotti, Lorenzo Vannozzi
Published in: Nanomaterials, Issue 9/8, 2019, Page(s) 1182, ISSN 2079-4991
DOI: 10.3390/nano9081182

Higher Ultrasonic Frequency Liquid Phase Exfoliation Leads to Larger and Monolayer to Few-Layer Flakes of 2D Layered Materials

Author(s): Madina Telkhozhayeva, Eti Teblum, Rajashree Konar, Olga Girshevitz, Ilana Perelshtein, Hagit Aviv, Yaakov R. Tischler, Gilbert Daniel Nessim
Published in: Langmuir, 2021, ISSN 0743-7463
DOI: 10.1021/acs.langmuir.0c03668

Scalable Synthesis of Few-Layered 2D Tungsten Diselenide (2H-WSe 2 ) Nanosheets Directly Grown on Tungsten (W) Foil Using Ambient-Pressure Chemical Vapor Deposition for Reversible Li-Ion Storage

Author(s): Rajashree Konar, Rosy, Ilana Perelshtein, Eti Teblum, Madina Telkhozhayeva, Maria Tkachev, Jonathan J. Richter, Elti Cattaruzza, Andrea Pietropolli Charmet, Paolo Stoppa, Malachi Noked, Gilbert Daniel Nessim
Published in: ACS Omega, Issue 5/31, 2020, Page(s) 19409-19421, ISSN 2470-1343
DOI: 10.1021/acsomega.0c01155