Tailoring Microstructure and Architecture to Build Ceramic Components with Unprecedented Damage Tolerance

Project Information

CeraText

Grant agreement ID: 817615

DOI

10.3030/817615

Project closed

EC signature date 15 January 2019

Start date 1 May 2019

End date 31 October 2024

Funded under

• EXCELLENT SCIENCE - European Research Council (ERC)

Total cost

€ 1 985 000,00

EU contribution

€ 1 985 000,00

Coordinated by

MONTANUNIVERSITAET LEOBEN
Austria

CORDIS provides links to public deliverables and publications of HORIZON projects.

Links to deliverables and publications from FP7 projects, as well as links to some specific result types such as dataset and software, are dynamically retrieved from OpenAIRE .

Publications

Peer reviewed articles (35)

Towards 3D-printed alumina-based multi-material components with enhanced thermal shock resistance

Author(s): J. Schlacher, S. Geier, M. Schwentenwein, R. Bermejo
Published in: Journal of the European Ceramic Society, Issue 12, 2023, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2023.11.009

Additive manufacturing of highly textured alumina ceramics

Author(s): A.-K. Hofer, I. Kraleva, R. Bermejo,
Published in: Open Ceramics, Issue 5, 2021, Page(s) 100085, ISSN 2666-5395
Publisher: Elsevier BV
DOI: 10.1016/j.oceram.2021.100085

Multifunctional performance of Ti2AlC MAX phase/2D braided alumina fiber laminates

Author(s): J. Gonzalez-Julian, I. Kraleva, M. Belmonte, F. Jung, T. Gries, R. Bermejo
Published in: Journal of the American Ceramic Society, Issue 105/1, 2021, Page(s) 120-130, ISSN 0002-7820
Publisher: American Ceramic Society
DOI: 10.1111/jace.18043

Improving contact damage resistance of spinel translucent ceramics through a multilayer design

Author(s): A. Najafzadehkhoee, A. Jabr, A. Talimian, R. Papšík, D. Drdlík, K. Maca, D. Galusek, R. Bermejo
Published in: Journal of the European Ceramic Society, Issue 12, 2025, Page(s) 117071, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2024.117071

Lithography-based additive manufacturing of porosity graded alumina

Author(s): Nohut, Serkan; Geier, Sebastian; Kraleva, Irina; Schwentenwein, Martin; Bermejo, Raul
Published in: Additive Manufacturing Letters, Issue 1, 2022, Page(s) 100060, ISSN 2772-3690
Publisher: Elsevier B.V.
DOI: 10.1016/j.addlet.2022.100060

Preparation and photocatalytic activity of TiO2 nanotube arrays prepared on transparent spinel substrate

Author(s): P. Petrisková, O. Monfort, L. Satrapinskyy, E. Dobročka, T. Plecenik, G. Plesch, R. Papšík, R. Bermejo, Z. Lenčéš
Published in: Ceramics International, Issue 47/9, 2021, Page(s) 12970-12980, ISSN 0272-8842
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.ceramint.2021.01.160

Towards high-strength electrolyte-supported solid oxide fuel cells

Author(s): A. Jana, I. Kraleva, J. Schlacher, P. Supancic, A. Egger, E. Bucher, R. Bermejo
Published in: Journal of the European Ceramic Society, Issue 12, 2025, Page(s) 116929, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2024.116929

Effect of second phase addition of zirconia on the mechanical response of textured alumina ceramics

Author(s): A.-K. Hofer, I. Kraleva, T. Prötsch, A. Vratanar, M. Wratschko, R. Bermejo
Published in: Journal of the European Ceramic Society, Issue 12, 2023, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2022.08.058

Towards high strength SrTiO3-based composites fabricated at room temperature

Author(s): A. Jabr, N. Kuzmić, S.D. Škapin, H. Jantunen, M. Nelo, M. Spreitzer, R. Bermejo
Published in: Journal of the European Ceramic Society, Issue 12, 2024, Page(s) 116782, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2024.116782

Bonding Performance of Surface-Treated Zirconia Cantilevered Resin-Bonded Fixed Dental Prostheses. In Vitro Evaluation and Finite Element Analysis

Author(s): T. Malgaj, R. Papšík, A. Abram, A. Kocjan, P. Jevnikar
Published in: Materials, Issue 24, 2023, ISSN 1996-1944
Publisher: MDPI Open Access Publishing
DOI: 10.3390/ma16072646

Scaling up the cold sintering process of ceramics

Author(s): Abdullah Jabr; Haley N. Jones; Andrea P. Argüelles; Susan Trolier-McKinstry; Clive Randall; Raul Bermejo
Published in: Journal of the European Ceramics Soceity, Issue 1, 2023, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2023.04.061

Highly textured 3D-printed translucent alumina through pressure-assisted sintering

Author(s): V. Necina, A.-K. Hofer, R. Bermejo, W. Pabst
Published in: Open Ceramics, Issue 12, 2023, ISSN 2666-5395
Publisher: Elsevier
DOI: 10.1016/j.oceram.2023.100487

Prediction of ring crack initiation in ceramics and glasses using a stress-energy fracture criterion

Author(s): R. Papšík, O. Ševeček, É. Martin, R. Bermejo
Published in: Journal of the American Ceramic Society, Issue 105/1, 2023, ISSN 0002-7820
Publisher: American Ceramic Society
DOI: 10.1111/jace.19076

Templated grain growth in rapid sintered 3D-printed alumina ceramics

Author(s): A.-K. Hofer, A. Kocjan, R. Bermejo
Published in: Open Ceramics, Issue 12, 2023, ISSN 2666-5395
Publisher: Elsevier
DOI: 10.1016/j.oceram.2023.100428

3D-printed alumina-based ceramics with spatially resolved porosity

Author(s): Nohut, Serkan; Schlacher, Josef; Kraleva, Irina; Schwentenwein, Martin; Bermejo, Raul
Published in: International Journal of Applied Ceramic Technoly, Issue 3, 2023, ISSN 1546-542X
Publisher: American Ceramic Society
DOI: 10.1111/ijac.14512

Strength of additive manufactured alumina

Author(s): J. Schlacher, T. Lube, W. Harrer, G. Mitteramskogler, M. Schwentenwein, R. Danzer, R. Bermejo
Published in: Journal of the European Ceramic Society, Issue 40/14, 2020, Page(s) 4737–4745, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2020.03.073

Comparison of biaxial strength measured with the Ball-on-Three-Balls- and the Ring-on-Ring-test

Author(s): M. Staudacher, T. Lube, J. Schlacher, P. Supancic
Published in: Open Ceramics, Issue 6, 2021, Page(s) 100101, ISSN 2666-5395
Publisher: Elsevier BV
DOI: 10.1016/j.oceram.2021.100101

Prediction of thermal shock induced cracking in multi-material ceramics using a stress-energy criterion

Author(s): R. Papšík, O. Ševeček, J. Schlacher, R. Bermejo
Published in: Engineering Fracture Mechanics, Issue 18, 2024, Page(s) 110121, ISSN 1873-7315
Publisher: Elsevier
DOI: 10.1016/j.engfracmech.2024.110121

Prediction of edge and tunnelling crack formation in layered ceramics using a stress-energy fracture criterion

Author(s): R. Papšík, O. Ševeček, A.-K. Hofer, I. Kraleva, J. Kreith, R. Bermejo
Published in: Journal of the European Ceramics Society, Issue 12, 2022, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2022.12.022

Contact damage tolerance of alumina-based layered ceramics with tailored microstructures

Author(s): J. Schlacher, A. Jabr, A.-K. Hofer, R. Bermejo
Published in: Journal of the American Ceramic Society, Issue 12, 2022, ISSN 0002-7820
Publisher: American Ceramic Society
DOI: 10.1111/jace.18389

Additive manufacturing of high-strength alumina through a multi-material approach

Author(s): J. Schlacher, A.-K. Hofer, I. Kraleva, R. Papšík, R. Bermejo
Published in: Open Ceramics, Issue 5, 2021, Page(s) 100082, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.oceram.2021.100082

Feasibility study on electrically conductive joining of MoSi2 electrodes for spark plugs

Author(s): M. Gruber, A. Tilz, W. Harrer, R. Papšík, W. Fimml, M. Engelmayer
Published in: International Journal of Applied Ceramic Technology, Issue 12, 2023, ISSN 1546-542X
Publisher: American Ceramic Society
DOI: 10.1111/ijac.14417

Effect of airbone particle abrasion and regeneration firing on the strength of 3D-printed 3Y and 5Y zirconia ceramics

Author(s): T. Mirt, A. Kocjan, A.-K. Hofer, M. Schwentenwein, A. Ivekovic, R. Bermejo, P. Jevnikar
Published in: Dental Materials, Issue 12, 2023, ISSN 0109-5641
Publisher: Elsevier BV
DOI: 10.1016/j.dental.2023.10.025

Hybridizing Lithography-Based Ceramic Additive Manufacturing with Two-Photon-Polymerization

Author(s): J.C. Sänger, M. Schwentenwein, R. Bermejo, J. Günster
Published in: Applied Sciences, 2023, ISSN 2076-3417
Publisher: MDPI
DOI: 10.3390/app13063974

Understanding the lower fracture resistance of cold sintered ceramics

Author(s): A. Jabr, E. Ribul, D. Salamon, R. Bermejo
Published in: Journal of the European Ceramic Society, Issue 12, 2025, Page(s) 116968, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2024.116968

Functionally graded ceramics by lithography-based ceramic manufacturing (LCM)

Author(s): Nohut, Serkan; Geier, Sebastian; Kraleva, Irina; Schwentenwein, Martin; Bermejo, Raul
Published in: Journal of additive manufacturing technologies, Issue 1, 2023, Page(s) 678, ISSN 2749-3229
Publisher: Infinite Science GmbH
DOI: 10.18416/jamtech.2212678

Contact damage response of alumina-based layered architectures under different loading configurations

Author(s): J. Schlacher, F. Stücklberger, A. Jabr, R. Bermejo
Published in: Journal of the European Ceramic Society, Issue 12, 2025, Page(s) 117037, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2024.117037

The effect of liquid phase chemistry on the densification and strength of cold sintered ZnO

Author(s): A. Jabr, J. Fanghanel, Z. Fan, R. Bermejo, C. Randall
Published in: Journal of the European Ceramic Soceity, Issue 12, 2023, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2022.11.071

Micro-scale fracture toughness of textured alumina ceramics

Author(s): J. Schlacher, T. Csanádi, M. Vojtko, R. Papšík, R. Bermejo
Published in: Journal of the European Ceramic Society, Issue 12, 2023, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2022.06.028

Effect of binder system on the thermo-physical properties of 3D-printed zirconia ceramics

Author(s): A.-K. Hofer, J. Schlacher, R. Bermejo
Published in: International Journal of Applied Ceramic Technology, Issue 12, 2020, Page(s) 1–7, ISSN 1546-542X
Publisher: American Ceramic Society
DOI: 10.1111/ijac.13806

High-strength lithography-based additive manufacturing of ceramic components with rapid sintering

Author(s): A.-K. Hofer, A. Kocjan, R. Bermejo
Published in: Additive Manufacturing, Issue 14, 2022, ISSN 2214-8604
Publisher: Elsevier BV
DOI: 10.1016/j.addma.2022.103141

High-temperature fracture behaviour of layered alumina ceramics with textured microstructure

Author(s): J. Schlacher, Z. Chlup, A.-K. Hofer, R. Bermejo
Published in: Journal of the European Ceramic Society, Issue 12, 2023, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2022.11.046

Linear volumetric additive manufacturing of zirconia from a transparent photopolymerizable ceramic slurry via Xolography

Author(s): J.C. Sänger; N.F. König; A. De Marzi; A. Zocca; G. Franchin; R. Bermejo; P. Colombo; J. Günster
Published in: Open Ceramics, Issue 12, 2024, Page(s) 100655, ISSN 2666-5395
Publisher: Elsevier
DOI: 10.1016/j.oceram.2024.100655

Press-compaction-assisted binder jetting of textured ceramics

Author(s): M.A. Moghadasi, A. Mahdaviarab, A.-K. Hofer, R. Bermejo, Z. Pei, C. Ma
Published in: Ceramics International, Issue 24, 2023, ISSN 0272-8842
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.ceramint.2023.09.265

Stereolithographic 3D Printing of Ceramics: Challenges and Opportunities for Structural Integrity

Author(s): T. Lube, M. Staudacher, A.-K. Hofer, J. Schlacher, R. Bermejo
Published in: Advanced Engineering Materials, Issue 24, 2022, ISSN 1438-1656
Publisher: John Wiley & Sons Ltd.
DOI: 10.1002/adem.202200520

Other (2)

LITHOZ: Multi-Material 3D Printing

Author(s): M. Schwentenwein, J. Schlacher, R. Bermejo
Published in: Ceramic applications, Issue 4, 2024, ISSN 2196-2413
Publisher: Goellar Verlag GmbH

Low-temperature fabrication of ceramics by the cold sintering process

Author(s): A. Jabr, R. Bermejo, O. Guillon, C. Randall
Published in: Ceramic forum international (CFI), Issue 4, 2023, Page(s) E2-E5, ISSN 0173-9913
Publisher: Goellar Verlag GmbH