Skip to main content
European Commission logo print header

Collection of raw materials, Removal of flAme reTardants and Reuse of secondary raw materials

Deliverables

SLO methodology for CREAToR

To increase consumer acceptance of recycled products a social license to operate toolkit will be developed including a methodology on sustainable business practices and local community protocol and a training program

Production of pellets for demonstrator production

Recipe and production of the injection moulding grade fulfilling the material properties for MAI demonstration case defined in WP1

Report about the industry recommendations

Analysis of the legislative obstacles and issues existing at national andor European levels which may impede to implement the most optimised sustainable solutions for the CREATOR EoL valorisation derived and resulting from the findings of dedicated workshop with the relevant sectoral organisations andor meeting with European or national legislators will be organised

Smart labelling system methodology report

Smart Labelling Systems Methodology will provide a framework for the mapping of product’s labelling with respect to their materials contents vis-à-vis facilitating their recycling. Such a label would inform users and recyclers alike, encouraging users to select products with high recycling potential and helping recyclers to select the right route for the item in question. The gap analysis will include the study of current certification requirements and to favour, at a later stage, the uptake of the certification scheme.

Creator Policy Brief

Final Policy Brief containing a Description of the policy issues identified across the project b Analysis of them by category Regulatory issues Market issues including certification and standardisation Technological issues c Suggested policy measures potentially structured by category regulation eg end of waste criteria barriers to trade for recycled materials etc market technology ie where additional policy support is needed be it I processing sorting or elsed If applicable to Creators partners Deployment ie what is important that policymakers should consider to see the technology deployed on the ground Note that this can have very different forms from financial support to product requirements eg on recycled content or EPR

Report of, process and end users' limitations and regulatory gaps

Giving an overview of the demands towards material properties and compostion potential end users may have for the recycled materials Therefor a survey will be held under potential end users Where possible appropriate pretreatment methods to help reach these demands will be identified and listed industrial requirements

Mapping of best practices for reverse cycle logistics

This deliverable is a report providing a conclusive picture of the state of art of reverse cycle logistics based on desk research and expert interviews. It also includes at least two in-depth analysis of cases which have overcome challenges comparable to the CREAToR reverse cycle.

Production of 3D printing filament

Production of 3D print filaments with the right dimensions usable in classic filament printers

Purification process using IL/(NA)DES performed

Purification process using NADES as cosolvents is running for all selected materials

Reverse cycle logistics design and evaluation method

The Reverse Cycle Design and Evaluation Method will be implemented as a simulation environment and be accompanied by documentation like a user guide It is a standalone deliverable that has value beyond the project scope but also is the basis for deriving the specific logistics concepts for CREAToR

Selection, conditioning and characterization of aviation based plastics

The report will contain a review about the aviation waste plastics situation in EU type of plastic current treatment valorisation routes etc It will include a classification of brominated plastics and their current application in the aeroplanes in order to facilitate their classification and further treatment Finally it will contain a first approach for the recycling of airplane plastics parts including the preconditioning of the materials and the final separation by materials

Extractive extrusion process performed with all provided material classes

Extractive extrusion process running for 20 kg h polymer feed all materials can be handeled dosing processing parameters granulating

Summary of data generation for the creation of smart labels

The deliverable will contain a basic proposal to labels the recycled plastics according with their chemical ad physical properties These properties will be priories by the industry demand

Final report on LCA/LCCA Management, and techno-economic assessment

Public report on Creator LCA and LCC including data from T36 and 44

Assessment of existing legislations and regulations

Giving an overview of relevant legislation and standards and identifying existing legal limitations on using the recycled materials in new products legal requirements

Certification Assessment Laymen Report

Certification Assessment Layman report is targeted at a nonspecialist audience and serves to inform of the project objectives and results concerning the most appropriate quality assurance system selected for each product together with the mapping of existing certification schemes

Eco-toxicity Roadmap

Report on environmental risks of the recycling chain

Analysis of recycling agents' conceptions & beliefs on SLS methodology

This analytical report will describe the analysis of conceptions and beliefs of recycling agents operators traders and dealers on certification schemes business models and use of marketing tools along distribution channels collected either on specific workshop WP6 or surveysinterviews or during facetoface communication

Life Cycle Inventory

Report showing Life Cycle Inventory structure

Demonstrator showing CREAToR's potential for aerospace application

CYCLEFIBER will manufacture 4 prototypes of each component upscaling to real component and fine tuning of process parameters and component surface quality requirement for assembly purposes additionally 8 kg for repeatability and stability of the production

Stakeholder workshops (1)

CREAToR will hold a stakeholder workshop, inviting local startups, and key partners from cluster groups in order to establish strategic partnerships, meanwhile collecting market data to achieve an “insider view” into the market, key trends and barriers to the use of recycled materials

Stakeholder workshops (2)

To increase consumer acceptance of recycled products a social license to operate methodology will be developed and on this basis two further stakeholder workshops will be held one for industrial stakeholders interested in directly implementing the CREAToR technologies and one for consumer associations eg the automotive manfacturers associations to help increase consumer acceptance of the technologies

Publications

Processi industriali per il recupero di materie prime dai Rifiuti da Apparecchiature Elettriche ed Elettroniche (RAEE)

Author(s): Teresa Sessa (REL)
Published in: "Webinar ""Economia Circolare e Riciclo""", Issue 15/05/2020. Youtube Video1h12Min -1h45 Min, 2019
Publisher: UNIMIB /RELIGHT

Supply chain in Plastics Recycling

Author(s): Moritz Jäger-Roschko (KLU)
Published in: CREATOR RECYCLER's WORKSHOP, Issue 10/03/2020, 2020
Publisher: KLU /CREATOR

CREATOR Presentation

Author(s): Irma Mikonsaari
Published in: Workshop on Recycling Plastics, 2021
Publisher: CREATOR Project

Challenges in recycling plastics from WEEE

Author(s): Mathilde Taveau (CLR)
Published in: Kunststoffen fair, Veldhoven, NL, Issue 25-26/09/2019, 2019
Publisher: CLR

CREATOR General Overview

Author(s): Irma Mikonsaari, Rocco Lagioia
Published in: WECF Helsinkin 2019, Issue 03-05/06/2019, 2019
Publisher: ITC

CREATOR Project Review

Author(s): Rocco Lagioia
Published in: EIT Sustainable Materials for Future Mobility-Torino, Issue 07-09/10/2019, 2019
Publisher: ITB

Compliancy and recycling: A way to sort it all out

Author(s): Mathilde Taveau, (CLR)
Published in: Plastics Circularity Multiplier conference, Issue 16/10/2020, 2020
Publisher: CLR / CREATOR

Presentation of CREATOR & PCMI in P4Planet Conference

Author(s): Arturo Sanabria (ITB)
Published in: CREATOR Web site, 2022
Publisher: CREATOR project

CReator Project general review

Author(s): Irma Mikoonsari, Rocco Lagioia
Published in: EASME Scaling Up Innovative Circular Solutions for Plastics- Helsinki (FI), Issue 03/06/2020, 2019
Publisher: ITRB, ITC

CREATOR PRESENTATION in K-Messe

Author(s): Irma Mikonsaari
Published in: K-Messe Trade Fair for Plastics and Rubber2019, Issue 19-26 October, 2019
Publisher: ICT / CREATOR

Smart Labelling in Plastic Recycling

Author(s): Francisca Gaona (ITB)
Published in: CREATOR'S Recyclers Workshop, Issue 10/03/2020, 2020
Publisher: ITB / CREATOR

Presentation of CREATOR Project in INdTech Conference in Grenoble

Author(s): Irma Mikonsaari (ICT)
Published in: IndTech Conference, Issue Annual Conference 2022, 2022
Publisher: CREATOR

Purification /Odour Contaminant and emission reduction

Author(s): Kevin Moser (ICT)
Published in: CREATOR'S RECYCLERS WORKSHOP, Issue 10/03/2020, 2020
Publisher: ICT / CREATOR

Cooperative Effect of Chemical and Physical Processes for Flame Retardant Additives in Recycled ABS

Author(s): M. Herrero, A. Rodriguez, M. Asensio, M. Santiago-Calvo, J. Guerrero, E. Cañibano, M. Fernandez
Published in: Polymers, 2023, ISSN 2073-4360
Publisher: MDPI
DOI: 10.3390/polym15112431

Advancing the circular economy through information sharing: A systematic literature review

Author(s): Moritz Jäger-Roschko; Moritz Petersen
Published in: Journal Of Cleaner Production (ELSEVIER), Issue 09596526, 2022, ISSN 0959-6526
Publisher: Elsevier BV
DOI: 10.1016/j.jclepro.2022.133210

Providing Recyclates with Reduced Emissions - Physical Recycling of Plastics

Author(s): Moser, Kevin; Mikonsaari, Irma; van de Walle, Elke
Published in: Kunststoffe International, Issue 8/2022, 2022, ISSN 1862-4243
Publisher: Carl Hanser Verlag GmbH & Co.
DOI: 10.24406/publica-655

Kunststoffe physikalisch recyceln

Author(s): Moser, Kevin Walle, Elke Van de Mikonsaari, Irma
Published in: Kunststoffe, 2022, ISSN 0023-5563
Publisher: Hanser
DOI: 10.24406/publica-656

"♻#Gaiker desarrolla soluciones innovadoras para el reciclaje de plásticos bromados"

Author(s): GKR
Published in: Issue 17/10/2019, 2019
Publisher: GKR / Twitter

How to recycle WEE

Author(s): Mathilde Taveau & Tom Caris (CLR)
Published in: RENEWI Publication, Issue 12/02/2021, 2021
Publisher: RENEWI

Challenges in recycling plastics from products with a long lifetime, and how standardization can facilitate in that

Author(s): Tom Carris (CLR)
Published in: CEN and CENELEC organised joint workshop Materials – Value chains for circular economy, Issue 29/10/2019, 2019
Publisher: CLR

OVAM werkt mee aan overgang naar Europese circulaire kunststofeconomie

Author(s): Roeland Juchtmants
Published in: OVAM Newsletter, Issue Monthly January 2022, 2022
Publisher: OVAM

Nuevo proyecto europeo para el reciclaje de plásticos bromados

Author(s): Íñigo Cacho
Published in: Resíduos Profesional, Issue 18/10/2019, 2019
Publisher: Resíduos Profesional / GKR

"Gaiker desarrolla soluciones innovadoras para el reciclaje de plásticos bromados #gaiker #plastico #reciclaje interempresas.net/Reciclaje/Arti…"

Author(s): GKR
Published in: Issue 11/11/2019, 2019
Publisher: Twitter / GKR

CREATOR's Life Cycle Inventory deliverable

Author(s): Iwona Blaszczyk (RWE)
Published in: Issue 05/09/2020, 2020
Publisher: RESEARCH GATE

"#GAIKER @IDEKO_IK4 desarrolla nuevas soluciones para el #reciclaje de #plásticos bromadosmtr.cool/mlgogtatoo vía @izarotech #química #innovación #REACH #SVHC #RAEE #electrónica #construcción #economíacircular #medioambiente"

Author(s): GKR
Published in: Issue 12/11/2019, 2019
Publisher: Twitter CHEMPLAST

Public Consultation on the Regulations on Persistent Organic Polluants

Author(s): Irma Mikonsaari, Esther Zondervan-van den Beuken, Muhammad Qureshi
Published in: Creator Project Web Site, 2022
Publisher: CReator Project

CREATOR/HRB POLICY BRIEF

Author(s): CREATOR partners + HRB Nontox Group
Published in: 2021
Publisher: Web site of CREATOR Project

Soluciones innovadoras para el reciclaje de plásticos bromados gaiker.es/cas/noticias/s…

Author(s): GKR
Published in: Issue 11/11/2019, 2019
Publisher: Twitter

"#GAIKER @IDEKO_IK4 desarrolla nuevas soluciones para el #reciclaje de #plásticos bromadosmtr.cool/feabpkakya vía @izarotech #química #innovación #REACH #SVHC #RAEE #electrónica #construcción #economíacircular #medioambiente"

Author(s): GKR
Published in: Issue 22/10/2019, 2019
Publisher: Twitter CHEMPLAST

Innovative solutions for the recycling of brominated plastics

Author(s): Mathilde Taveau
Published in: AVEP Newsletter, Issue January 2021, 2021
Publisher: AVEP (Asociación Valenciana de Empresarios de Plástico)

GAIKER, soluciones innovadoras para el reciclaje de plásticos bromados

Author(s): Íñigo Cacho (GKR)
Published in: MUNDO ECO, Issue 17/10/2019, 2019
Publisher: MUNDO ECO / GKR

Mapping of best practices for reverse cycle logistics (D5.1 CREATOR PRoject)

Author(s): Moritz Jäger-Roschko; Els Herremans, Luk Umans, Gwen Dons, Moritz Petersen
Published in: CREATOR WebSite, Issue January 2021, 2021
Publisher: CREATOR

GAIKER desarrppñña soluyciones innovadoras para el reciclaje de plásticos Bromados

Author(s): Íñigo Cacho
Published in: IZARO Manufacturing Technology, Issue 22/10/2019, 2019
Publisher: IZARO / GKR

"Gaiker desarrolla soluciones innovadoras para el reciclaje de plásticos bromados #gaiker #plastico #reciclaje interempresas.net/Plastico/Artic…"

Author(s): GKR
Published in: Issue 11/11/2019, 2019
Publisher: TWITTER PLASTICOS UNIVERSALES

Challenges in recycling plastics from WEEE

Author(s): Mathilde Taveau
Published in: Kunststoffen fair, Veldhoven, NL, Issue 25-26/09/2019, 2019
Publisher: CLR

GAIKER desarrolla soluciones Innovadoras para el reciclaje de plásticos bromados

Author(s): Íñigo Cacho
Published in: INTEREMPRESAS.net, Issue 11/11/2019, 2019
Publisher: Interempresas.net www.interempresas.net

Nuevas soluciones innovadoras para el reciclaje de plásticos bromados

Author(s): Íñigo Cacho (GKR)
Published in: RETEMA, Issue 17-10-2019, 2019
Publisher: RETEMA / GKR

Soluciones innovadoras para el reciclaje de plásticos bromados

Author(s): Mathilde Taveau
Published in: AVEP Asociación valenciana de Empresarios Plásticos, Issue n.125 January Edition, 2021, Page(s) 22-23
Publisher: AVEP Asociación valenciana de Empresarios del Plástico

CREATOR Life Cycle Inventory deliverable

Author(s): Iwona Blaszczyk (RWE)
Published in: Issue 31/05/2019, 2019
Publisher: Linkedin Iwona Blaszczyk (RWE)

Soluciones innovadoras para el reciclaje de plásticos bromados

Author(s): Íñigo Cacho
Published in: DYNA Energía y Sostenibilidad, Issue 17/10/2019, 2019
Publisher: DYNA Energía y Sostenibilidad

Gaiker desarrolla soluciones innovadoras para el reciclaje de plásticos bromados

Author(s): Íñigo Cacho
Published in: FuturENVIRO, Proyecto Tecnología y Actualidad Medioambiental, Issue 17/10/2019, 2019
Publisher: Futur ENVIRO /GKR

Searching for OpenAIRE data...

There was an error trying to search data from OpenAIRE

No results available