Removing hazardous substances to increase recycling rates of WEEE, ELV and CDW plastics

Informations projet

NONTOX

N° de convention de subvention: 820895

DOI 10.3030/820895

Projet clôturé

Date de signature de la CE 3 Mai 2019

Date de début 1 Juin 2019

Date de fin 30 Novembre 2022

Financé au titre de

• SOCIETAL CHALLENGES - Climate action, Environment, Resource Efficiency and Raw Materials

Coût total € 4 998 076,25

Contribution de l’UE € 4 998 076,25

Coordonné par

TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
Finland

Livrables

Documents, reports (12)

Report on enhancing actions to reach a circular plastic economy

Suggestions on actions for cicularity targets will be presented Practical solutions will be highlighted

Results of social LCA

Findings from the social life cycle analyses will be drafted in a report

Procedure for safe working

A report on the procedure for safe working with contaminated materials.

Market survey and competitor analysis

The analyses will be based on existing and public available data

The life cycle impact assessment results

Results from the LCIA will be presented in a public report

A set of indicators for an easier identification of impacts of recycling and circularity

The report will define the selection criteria for indicators chosen for identifying impacts of recycling

The inventory table of the environmental LCA

The goal and scope definition of LCA will be formulated in a public report

Review on operational environment

A public report will be prepared on the current regulatory and standardisation state of art

Public summary of the final TEA

The report will be an executive summary of the final TechnoEconomic Assessment

Publishable reports on plastics recycling, featuring recycling with legacy additives from C&DW, ELV, WEEE; testing of plastic materials, including scrap & recyclate.

The report will present an state of the art Report on plastics recycling methods,g, practices with plastic recycling with legacy additives and standard methods of testing of plastic materials, including scrap & recyclate.

Digital review on eco-design (in the context of NONTOX project)

A report on the ecodesign for recyclability will be presented

Mapping of Feedstock

Different streams of plastic waste type will be mapped in a report

Open Research Data Pilot (1)

Data Management Plan

The data management methods, especially to describe how the data will be generated, processed, collected, stored and documented

Publications

Peer reviewed articles (7)

Compatibilized PC/ABS blends from solvent recycled PC and ABS polymers from electronic equipment waste

Auteurs: Pelto Jani, Barreto Carlos, Anwar Hany, Strobl Laura, Schlummer Martin
Publié dans: Polymer Testing, Numéro Volume 12, 2023, Page(s) art.no 107969, ISSN 0142-9418
Éditeur: Elsevier BV
DOI: 10.1016/j.polymertesting.2023.107969

About the environmental sustainability of the European management of WEEE plastics

Auteurs: Cardamone Giovanni Francesco, Ardolino Filomena, Arena Umberto
Publié dans: Waste Management, Numéro Volume 135, 2021, Page(s) 119 - 132, ISSN 0956-053X
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.wasman.2021.02.040

Mechanochemical dehalogenation of brominated flame retardants and preliminary application for recycling BFR-containing plastic waste

Auteurs: Shengyong Lu, Xuanhao Guo, Hao He, Yaqi Peng, Jiamin Ding, Jinjian Ding, Huiping Zhu, Qureshi Muhammad, Ilkka Rytöluoto, Anna Tenhunen
Publié dans: Journal of Environmental Chemical Engineering, 2023, ISSN 2213-3437
Éditeur: Elsevier BV
DOI: 10.1016/j.jece.2023.109916

Technical and environmental performances of alternative treatments for challenging plastics waste

Auteurs: Arena Umberto, Ardolino Filomena
Publié dans: Resources, Conservation and Recycling, Numéro Volume 183, 2022, Page(s) Article number 106379, ISSN 0921-3449
Éditeur: Elsevier BV
DOI: 10.1016/j.resconrec.2022.106379

Can plastics from end-of-life vehicles be managed in a sustainable way?

Auteurs: Cardamone Giovanni Francesco, Ardolino Filomena, Arena Umberto
Publié dans: Sustainable Production and Consumption, Numéro Volume 29, 2022, Page(s) 115-127, ISSN 2352-5509
Éditeur: Elsevier B.V.
DOI: 10.1016/j.spc.2021.09.025

How to enhance the environmental sustainability of WEEE plastics management: An LCA study

Auteurs: Ardolino Filomena, Cardamone Giovanni Francesco, Arena Umberto
Publié dans: Waste Management, Numéro Volume 128, 2021, Page(s) 347 - 359, ISSN 0956-053X
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.wasman.2021.09.021

Social life cycle assessmemt of innovative management schems for challenging plastics waste

Auteurs: Ardolino Filomena, Palladini Anna Rita, Arena Umberto
Publié dans: Sustainable Production and Consumption, Numéro Volume 37, 2023, Page(s) 344-355, ISSN 2352-5509
Éditeur: Elsevier B.V.
DOI: 10.1016/j.spc.2023.03.011

Conference proceedings (2)

Active Hyperspectral Sensor for Mineralogy Mapping and Plastic Waste Sorting

Auteurs: Francisco Senna Vieira, Mikhail Mekhrengin, Teemu Kääriäinen, Ilkka Rytöluoto, Timo Dönsberg, Guillaume Genoud
Publié dans: 20th International Conference on Near Infrared Spectroscopy, 2021
Éditeur: China Council of Near Infrared Spectroscopy

Raman spectroscopy combined with active hyperspectral sensing for classification of waste plastics containing brominated flame retardants: a sensor fusion approach

Auteurs: Sormunen, Tuomas and Rytöluoto, Ilkka and Tenhunen-Lunkka, Anna and Senna Vieira, Francisco
Publié dans: Field Laser Applications in Industry and Research 2022, 2022
Éditeur: SSRN
DOI: 10.2139/ssrn.4264557

Thesis and dissertations (3)

Analysis of innovative recycling processes for challenging waste plastics in a Life Cycle Perspective

Auteurs: Giovanni Francesco Cardamone
Publié dans: 2022
Éditeur: Università di Vanvitelli

Analysis of brominated flame retardants in plastics by infrared reflectance spectroscopy

Auteurs: Chen Lingyi
Publié dans: 2021
Éditeur: AALTO

Fuels from plastic waste

Auteurs: Carmine Boccia
Publié dans: 2023
Éditeur: "Università degli Studi della Campania ""Luigi Vanvitelli"""