Removing hazardous substances to increase recycling rates of WEEE, ELV and CDW plastics

Informazioni relative al progetto

NONTOX

ID dell’accordo di sovvenzione: 820895

DOI 10.3030/820895

Progetto chiuso

Data della firma CE 3 Maggio 2019

Data di avvio 1 Giugno 2019

Data di completamento 30 Novembre 2022

Finanziato da

• SOCIETAL CHALLENGES - Climate action, Environment, Resource Efficiency and Raw Materials

Costo totale € 4 998 076,25

Contributo UE € 4 998 076,25

Coordinato da

TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
Finland

Risultati finali

Documents, reports (12)

Report on enhancing actions to reach a circular plastic economy

Suggestions on actions for cicularity targets will be presented Practical solutions will be highlighted

Results of social LCA

Findings from the social life cycle analyses will be drafted in a report

Procedure for safe working

A report on the procedure for safe working with contaminated materials.

Market survey and competitor analysis

The analyses will be based on existing and public available data

The life cycle impact assessment results

Results from the LCIA will be presented in a public report

A set of indicators for an easier identification of impacts of recycling and circularity

The report will define the selection criteria for indicators chosen for identifying impacts of recycling

The inventory table of the environmental LCA

The goal and scope definition of LCA will be formulated in a public report

Review on operational environment

A public report will be prepared on the current regulatory and standardisation state of art

Public summary of the final TEA

The report will be an executive summary of the final TechnoEconomic Assessment

Publishable reports on plastics recycling, featuring recycling with legacy additives from C&DW, ELV, WEEE; testing of plastic materials, including scrap & recyclate.

The report will present an state of the art Report on plastics recycling methods,g, practices with plastic recycling with legacy additives and standard methods of testing of plastic materials, including scrap & recyclate.

Digital review on eco-design (in the context of NONTOX project)

A report on the ecodesign for recyclability will be presented

Mapping of Feedstock

Different streams of plastic waste type will be mapped in a report

Open Research Data Pilot (1)

Data Management Plan

The data management methods, especially to describe how the data will be generated, processed, collected, stored and documented

Pubblicazioni

Peer reviewed articles (7)

Compatibilized PC/ABS blends from solvent recycled PC and ABS polymers from electronic equipment waste

Autori: Pelto Jani, Barreto Carlos, Anwar Hany, Strobl Laura, Schlummer Martin
Pubblicato in: Polymer Testing, Numero Volume 12, 2023, Pagina/e art.no 107969, ISSN 0142-9418
Editore: Elsevier BV
DOI: 10.1016/j.polymertesting.2023.107969

About the environmental sustainability of the European management of WEEE plastics

Autori: Cardamone Giovanni Francesco, Ardolino Filomena, Arena Umberto
Pubblicato in: Waste Management, Numero Volume 135, 2021, Pagina/e 119 - 132, ISSN 0956-053X
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.wasman.2021.02.040

Mechanochemical dehalogenation of brominated flame retardants and preliminary application for recycling BFR-containing plastic waste

Autori: Shengyong Lu, Xuanhao Guo, Hao He, Yaqi Peng, Jiamin Ding, Jinjian Ding, Huiping Zhu, Qureshi Muhammad, Ilkka Rytöluoto, Anna Tenhunen
Pubblicato in: Journal of Environmental Chemical Engineering, 2023, ISSN 2213-3437
Editore: Elsevier BV
DOI: 10.1016/j.jece.2023.109916

Technical and environmental performances of alternative treatments for challenging plastics waste

Autori: Arena Umberto, Ardolino Filomena
Pubblicato in: Resources, Conservation and Recycling, Numero Volume 183, 2022, Pagina/e Article number 106379, ISSN 0921-3449
Editore: Elsevier BV
DOI: 10.1016/j.resconrec.2022.106379

Can plastics from end-of-life vehicles be managed in a sustainable way?

Autori: Cardamone Giovanni Francesco, Ardolino Filomena, Arena Umberto
Pubblicato in: Sustainable Production and Consumption, Numero Volume 29, 2022, Pagina/e 115-127, ISSN 2352-5509
Editore: Elsevier B.V.
DOI: 10.1016/j.spc.2021.09.025

How to enhance the environmental sustainability of WEEE plastics management: An LCA study

Autori: Ardolino Filomena, Cardamone Giovanni Francesco, Arena Umberto
Pubblicato in: Waste Management, Numero Volume 128, 2021, Pagina/e 347 - 359, ISSN 0956-053X
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.wasman.2021.09.021

Social life cycle assessmemt of innovative management schems for challenging plastics waste

Autori: Ardolino Filomena, Palladini Anna Rita, Arena Umberto
Pubblicato in: Sustainable Production and Consumption, Numero Volume 37, 2023, Pagina/e 344-355, ISSN 2352-5509
Editore: Elsevier B.V.
DOI: 10.1016/j.spc.2023.03.011

Conference proceedings (2)

Active Hyperspectral Sensor for Mineralogy Mapping and Plastic Waste Sorting

Autori: Francisco Senna Vieira, Mikhail Mekhrengin, Teemu Kääriäinen, Ilkka Rytöluoto, Timo Dönsberg, Guillaume Genoud
Pubblicato in: 20th International Conference on Near Infrared Spectroscopy, 2021
Editore: China Council of Near Infrared Spectroscopy

Raman spectroscopy combined with active hyperspectral sensing for classification of waste plastics containing brominated flame retardants: a sensor fusion approach

Autori: Sormunen, Tuomas and Rytöluoto, Ilkka and Tenhunen-Lunkka, Anna and Senna Vieira, Francisco
Pubblicato in: Field Laser Applications in Industry and Research 2022, 2022
Editore: SSRN
DOI: 10.2139/ssrn.4264557

Thesis and dissertations (3)

Analysis of innovative recycling processes for challenging waste plastics in a Life Cycle Perspective

Autori: Giovanni Francesco Cardamone
Pubblicato in: 2022
Editore: Università di Vanvitelli

Analysis of brominated flame retardants in plastics by infrared reflectance spectroscopy

Autori: Chen Lingyi
Pubblicato in: 2021
Editore: AALTO

Fuels from plastic waste

Autori: Carmine Boccia
Pubblicato in: 2023
Editore: "Università degli Studi della Campania ""Luigi Vanvitelli"""