Development and validation of a powder HIP route for high temperature Astroloy to manufacture Ultrafan® IP Turbine Casings

Resultado final

Final publishable project report

Final PDER. Final Plan for Dissemination and Exploitation of Results.

Final PDER Final Plan for Dissemination and Exploitation of Results

Publicaciones

High Temperature Deformation behaviour of a Ni-based superalloy processed via Spark Plasma sintering

Autores: A. Potenciano, I. Sabirov, J.M. Torralba, M. Aristizabal, I. Iturriza
Publicado en: EUROPM2021 conference, 2021
Editor: EUROPM2021 conference

1st workshop CoCoAM, Bologna (Italy), 9-10/07/2019; Audience: Academic professors and researcher of the Italian Universities (sectors: Metallurgy, Mechanical ENìngineering, Mechanical Design)

Autores: INSTM
Publicado en: 2019
Editor: x

Ceit: Paper and oral presentation in Procedia Manufacturing. Metal Forming 2020 and Procedia Manufacturing. “Estimation of powder flow behavior using finite element method”.

Autores: CEIT
Publicado en: 2020
Editor: X

Thermomechanical Calibration of Constitutive Material Models for Ballistic Impact Simulation

Autores: Juan L. de Pablos, Ilchat Sabirov e Ignacio Romero
Publicado en: 2022
Editor: IFASD Congress 2022

Effect of gas atomised powder characteristics on the HIPped Astroloy properties

Autores: M. Aristizabal, U. Galech, M. Sarasola, R. Soler, E. Paños, I. Iturriza
Publicado en: 2022
Editor: WorldPM2022

Microstructure evolution during high temperature plastic deformation of Astroloy processed via spark plasma sintering

Autores: A. Potenciano, I. Sabirov, J.M. Torralba, A. Fernandez-Valdes, M. Aristizabal, I. Iturriza
Publicado en: EUROMAT 2021 conference, 2021
Editor: EUROMAT 2021 conference

Study of Astroloy powder compaction at high temperature under hydrostatic load using finite elements

Autores: B.Elguezabal, J.Alkorta, J.Mm.Martinez-esnaola
Publicado en: Powder Technology, 2020, Página(s) 381 (2021) 92-100, ISSN 0032-5910
Editor: Elsevier BV
DOI: 10.1016/j.powtec.2020.12.001

A Methodology for the Statistical Calibration of Complex Constitutive Material Models: Application to Temperature-Dependent Elasto-Visco-Plastic Materials.

Autores: Juan Luis de Pablos; Edoardo Menga; Ignacio Romero
Publicado en: Volume 13, Edición 2, 2020, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma13194402

Study of powder densification under hydrostatic loads at high temperatures using finite element method

Autores: Borja Elguezabal, Jon Alkorta, José M. Martínez-Esnaola, Rafael Soler, Estíbaliz Paños
Publicado en: Procedia Manufacturing, Edición 50, 2020, Página(s) 401-406, ISSN 2351-9789
Editor: Procedia Manufacturing
DOI: 10.1016/j.promfg.2020.08.073

Effect of the particle size distribution on physical properties, composition, and quality of gas atomized Astroloy powders for HIP application

Autores: E. Bassini, U. Galech, T. Soria, M. Aristizabal, I. Iturriza, S. Biamino, D. Ugues
Publicado en: Journal of Alloys and Compounds, Edición 890, 2022, Página(s) 161631, ISSN 0925-8388
Editor: Elsevier BV
DOI: 10.1016/j.jallcom.2021.161631

Thermal mass effect on microstructure and properties of HIPped Astroloy components

Autores: U. Galech, M. Aristizabal, B. Elguezabal, A. Sivo, I. Iturriza
Publicado en: Materials, Edición 15, 2022, Página(s) 1434, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma15041434

EHU/UPV: paper. Nuevos materiales y procesos productivos para componentes del motor aeronáutico.

Autores: UPV: D. García, A. Rodríguez, E. Paños, M. Esparta, N. López.
Publicado en: Técnica y tecnología para la industria aeronáutica, Vol.81 (2018), pp.14-17., 2018, ISSN 2014-8305
Editor: X

Resultado final

Publicaciones

Compartir esta página

Descargar