Development and validation of a powder HIP route for high temperature Astroloy to manufacture Ultrafan® IP Turbine Casings

Risultati finali

Final publishable project report

Final PDER. Final Plan for Dissemination and Exploitation of Results.

Final PDER Final Plan for Dissemination and Exploitation of Results

Pubblicazioni

High Temperature Deformation behaviour of a Ni-based superalloy processed via Spark Plasma sintering

Autori: A. Potenciano, I. Sabirov, J.M. Torralba, M. Aristizabal, I. Iturriza
Pubblicato in: EUROPM2021 conference, 2021
Editore: EUROPM2021 conference

1st workshop CoCoAM, Bologna (Italy), 9-10/07/2019; Audience: Academic professors and researcher of the Italian Universities (sectors: Metallurgy, Mechanical ENìngineering, Mechanical Design)

Autori: INSTM
Pubblicato in: 2019
Editore: x

Ceit: Paper and oral presentation in Procedia Manufacturing. Metal Forming 2020 and Procedia Manufacturing. “Estimation of powder flow behavior using finite element method”.

Autori: CEIT
Pubblicato in: 2020
Editore: X

Thermomechanical Calibration of Constitutive Material Models for Ballistic Impact Simulation

Autori: Juan L. de Pablos, Ilchat Sabirov e Ignacio Romero
Pubblicato in: 2022
Editore: IFASD Congress 2022

Effect of gas atomised powder characteristics on the HIPped Astroloy properties

Autori: M. Aristizabal, U. Galech, M. Sarasola, R. Soler, E. Paños, I. Iturriza
Pubblicato in: 2022
Editore: WorldPM2022

Microstructure evolution during high temperature plastic deformation of Astroloy processed via spark plasma sintering

Autori: A. Potenciano, I. Sabirov, J.M. Torralba, A. Fernandez-Valdes, M. Aristizabal, I. Iturriza
Pubblicato in: EUROMAT 2021 conference, 2021
Editore: EUROMAT 2021 conference

Study of Astroloy powder compaction at high temperature under hydrostatic load using finite elements

Autori: B.Elguezabal, J.Alkorta, J.Mm.Martinez-esnaola
Pubblicato in: Powder Technology, 2020, Pagina/e 381 (2021) 92-100, ISSN 0032-5910
Editore: Elsevier BV
DOI: 10.1016/j.powtec.2020.12.001

A Methodology for the Statistical Calibration of Complex Constitutive Material Models: Application to Temperature-Dependent Elasto-Visco-Plastic Materials.

Autori: Juan Luis de Pablos; Edoardo Menga; Ignacio Romero
Pubblicato in: Volume 13, Numero 2, 2020, ISSN 1996-1944
Editore: MDPI Open Access Publishing
DOI: 10.3390/ma13194402

Study of powder densification under hydrostatic loads at high temperatures using finite element method

Autori: Borja Elguezabal, Jon Alkorta, José M. Martínez-Esnaola, Rafael Soler, Estíbaliz Paños
Pubblicato in: Procedia Manufacturing, Numero 50, 2020, Pagina/e 401-406, ISSN 2351-9789
Editore: Procedia Manufacturing
DOI: 10.1016/j.promfg.2020.08.073

Effect of the particle size distribution on physical properties, composition, and quality of gas atomized Astroloy powders for HIP application

Autori: E. Bassini, U. Galech, T. Soria, M. Aristizabal, I. Iturriza, S. Biamino, D. Ugues
Pubblicato in: Journal of Alloys and Compounds, Numero 890, 2022, Pagina/e 161631, ISSN 0925-8388
Editore: Elsevier BV
DOI: 10.1016/j.jallcom.2021.161631

Thermal mass effect on microstructure and properties of HIPped Astroloy components

Autori: U. Galech, M. Aristizabal, B. Elguezabal, A. Sivo, I. Iturriza
Pubblicato in: Materials, Numero 15, 2022, Pagina/e 1434, ISSN 1996-1944
Editore: MDPI Open Access Publishing
DOI: 10.3390/ma15041434

EHU/UPV: paper. Nuevos materiales y procesos productivos para componentes del motor aeronáutico.

Autori: UPV: D. García, A. Rodríguez, E. Paños, M. Esparta, N. López.
Pubblicato in: Técnica y tecnología para la industria aeronáutica, Vol.81 (2018), pp.14-17., 2018, ISSN 2014-8305
Editore: X

Risultati finali

Pubblicazioni

Condividi questa pagina

Scarica