Resultado final
Data Management Plan This deliverable describes the data management life cycle for the data to be collected, processed and/or generated by the MIDAS project. It includes information on: • the handling of research data during and after the end of the project • what data will be collected, processed and/or generated • which methodology and standards will be applied • whether data will be shared/made open access and • how data will be curated and preserved (including after the end of the project). The Horizon 2020 FAIR DMP template will be used.
MIDAS ADP Final Qualification ReviewWith this deliverable the following output will be delivered to the TMMIDAS unit final design filesMIDAS unit final configuration listMIDAS unit user maintenance manualFinal Qualification Review Report FQRR report of summary of positive completeness of the project requirements traceability input requirements to output justification files approval from customer authorities
Air Data Probe Environmental Test ReportAir Data Probe Environmental Test ReportThis deliverable contains the results of the environmental test executed on MIDAS unit
Communication, Dissemination and exploitation planThis deliverable will address the following contents Communication: • Identify social and professional network for promoting the action and demonstrating the EU funding effectiveness • Update Partner’s websites with MIDAS relevant aspects and results Dissemination: • Dissemination of knowledge during and after the project • Identification of the groups (academic/industrial/end user/certification bodies) that will be targeted for dissemination • Identification of the objectives to be disseminated • List of possible events to attend (conference, airshow, exhibition, …) Exploitation: • Identification of responsibilities and benefits deriving from a possible exploitation (ref. doc IP) • Identification of stakeholders interested in the possible exploitation of MIDAS output • Identification of the actions to achieve the exploitation • Identification of all the possible derived technologies of MIDAS project for parallel projects (at Consortium and single Partner level)
Air Data Probe component characterizationAir Data Probe component characterizationThe probe group probes transducers characterization report will be delivered The report will cotain all results obtained in the following conditionstemperature between 40 C and 100 humidity from 0 rH to 100 rHpressure and wind thanks to INRiMs EDDIE wind tunnel from 110 kPa down to 1 kPaand up to 30 msMoreover detailed results about repetition of tests and statistical analysis on repeatability will be reported
Preliminary Design ReviewPreliminary Design Review DRL list of Project Management Plan for PDR • Hardware Design Description (HDD): description of hardware architecture, components, performance • Software Design Description (SDD): description of software/firmware architecture, components, performance • Software Test Plan (STP): description of methods for SW validation. Detailed test will be described in the Software Test Description (STD) • Interface Control Documents (ICD): interfaces of the MIDAS unit (mechanical, electrical connectors, communication protocols) • Projects analysis, preliminary drawings and design justification files • Requirement Traceability Matrix • Validation Test Plan (VTP): description of functional test to be executed on the HW, SW/FW and the complete system (planning) • Qualification Test Plan (QTP): description of environmental test (planning) • Test Requirement Document (TRD): description and requirements of the tools and test benches necessary for the testing and validation process; procedure for testing. • HW/SW configuration management plan
Probe Group optimizationProbe Group optimization Thermo Fluid dynamic model for ADP optimization • Projects analysis, preliminary drawings and design justification files • Updated SRR with final installation requirements of the probe on the target platform
System Requirement ReviewSystem Requirement Review (SSR) DRL list of Project Management Plan for SRR • System Requirement Specification (SRS): HW requirement, SW Requirements, Environmental Qualification Requirement, Quality Requirements, Performance Requirements • Interface Requirement Specification (IRS): mechanical installation requirements, electrical installation requirements, communication interface requirements • Project Quality Plan (PQP) : definitions of role and responsibilities, design and implementation workflows, Key-Performance-Indicators (KPI) identification, standards and regulatory references; subpart-1: HW development plan, FW development plan • Project Master Plan (PMP) • Project Risk Analysis • SRR report
Test Readiness ReviewTest Readiness ReviewDRL list of Project Management Plan for TRRSoftware Test Description STD test case description for each SWFW partsubpart Definition of the template of Software Test Report STRTest case description for MIDAS ADP selection of the most relevant environmental tests DO 160 Tests will be executed in Task 42Qualification Test Report QTR template of report based on QTP to be executed after approval of TRR during WP4Validation Test Report VTR template of report based on VTP to be executed after approval of TRR during WP4MIDAS HWSW configuration status checklist description of the MIDAS unit configuration that will be manufactured during WP3 and tested during WP4
Report on Communication, Dissemination and Exploitation actionsThis deliverable will report on the actual perfomed Communication Dissemination and Exploitation activities with reference to the activity planned in D12
Critical Design ReviewCritical Design Review DRL list of Project Management Plan for CDR • Weight analysis • Outline Drawings • Electrical power consumption characteristics • Bonding and grounding diagram • Drawing tree • Part List • Detailed Design Files • Logistic Analysis(MTBF / MTTR, Replaceable units) • Product Acceptance Test Procedure (PTP): for testing of series products • STTE design files and tools description: detailed description of Special to Type Test Equipment and lab tools that will be used during Test Phase • HW/SW/FW checklists to DO-254 and other required standards • Minimum set of test manoeuvres necessary to define the database that will be used to implement and validate the virtual sensor
Air Data Probe Acceptance Test ReportAir Data Probe Acceptance Test ReportThis deliverable contains the results of the functional test executed on MIDAS units HW and SWFW
D3.3 Air Data Probe ground support equipment / test benchThe following output are expected in D3.3:•Test Bench Hardware Design Description (HDD) – detailed description of the test bench hardware and software•Test Bench User Manual •Test Bench Acceptance Test Procedure – to validate performance of the test benches respect to the Test Requirement Document (TRD) defined at Task2.2
Air Data Probe prototype Assembling / ManufacturingAir Data Probe prototype Assembling ManufacturingThe present deliverable will be focused on delivery of the MIDAS ADP prototype manufactured and assembled by SELT AD and the following reportsFAI First Article Inspection reportScope of FAI is to guarantee correct execution of manufacturing and assembly activities in accordance to the design documentation so to verify installed components methods of fixing sealing painting coatingCSR Configuration Status ReportScope of configuration status report is to provide detailed information on the items and components subject to modification or reprogramming The Configuration Status Report is baseline for testing and integration activities and to track the changes and modifications occurred during integration to reach the required performanceQualification Test Report QTR based on the QTP prepared at Task 25Validation Test Report VTR based on the VTP prepared at Task 25Acceptance Test Report ATR based on the ATP prepared at Task 24
Publicaciones
Autores:
Alberto Brandl; Graziano Coppa; Piero Gili
Publicado en:
2020 IEEE 7th International Workshop on Metrology for AeroSpace (MetroAeroSpace), 2020, ISBN 978-1-7281-6636-0
Editor:
IEEE
DOI:
10.1109/metroaerospace48742.2020.9160045
Autores:
Alberto Brandl; Manuela Battipede
Publicado en:
IEEE 7th International Workshop on Metrology for AeroSpace (MetroAeroSpace), 2020, ISBN 978-1-7281-6636-0
Editor:
IEEE
DOI:
10.1109/metroaerospace48742.2020.9160024
Autores:
Angelo Lerro, Manuela Battipede, Giovanni Sangaletti, Daniele Barbera, Samuele Antinori
Publicado en:
2020 IEEE 7th International Workshop on Metrology for AeroSpace (MetroAeroSpace), 2020, ISBN 978-1-7281-6636-0
Editor:
IEEE
DOI:
10.1109/metroaerospace48742.2020.9160066
Autores:
Alberto Brandl; Manuela Battipede
Publicado en:
14th WCCM-ECCOMAS Congress 2020, 2021
Editor:
ECCOMAS
DOI:
10.23967/wccm-eccomas.2020.192
Autores:
Angelo Lerro; Chiara Musacchio
Publicado en:
2020 IEEE 7th International Workshop on Metrology for AeroSpace (MetroAeroSpace), 2020, ISBN 978-1-7281-6636-0
Editor:
IEEE
DOI:
10.1109/metroaerospace48742.2020.9160343
Autores:
Angelo Lerro, Manuela Battipede, Piero Gili, Michele Ferlauto, Alberto Brandl, Andrea Merlone, Chiara Musacchio, Giovanni Sangaletti, Giuseppe Russo
Publicado en:
2019 IEEE 5th International Workshop on Metrology for AeroSpace (MetroAeroSpace), 2019, Página(s) 714-719, ISBN 978-1-7281-1344-9
Editor:
IEEE
DOI:
10.1109/metroaerospace.2019.8869602
Autores:
Angelo Lerro, Manuela Battipede
Publicado en:
Applied Sciences, 2021, Página(s) 23, ISSN 2076-3417
Editor:
MDPI
DOI:
10.3390/app11073127
Autores:
Angelo Lerro, Alberto Brandl, Manuela Battipede, Piero Gili
Publicado en:
Sensors, Edición 19/23, 2019, Página(s) 5133, ISSN 1424-8220
Editor:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/s19235133
Autores:
Angelo Lerro, Alberto Brandl, Manuela Battipede, Piero Gili
Publicado en:
Aerospace, Edición 7/5, 2020, Página(s) 63, ISSN 2226-4310
Editor:
MDPI
DOI:
10.3390/aerospace7050063
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles