Next gEneration loW pressure TurbinE Airfoils by aM

Información del proyecto

NEWTEAM

Identificador del acuerdo de subvención: 821274

DOI

10.3030/821274

Proyecto cerrado

Fecha de la firma de la CE 3 Octubre 2018

Fecha de inicio 1 Noviembre 2018

Fecha de finalización 31 Enero 2022

Financiado con arreglo a

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Coste total

€ 800 000,00

Aportación de la UE

€ 800 000,00

Coordinado por

CONSORZIO INTERUNIVERSITARIO NAZIONALE PER LA SCIENZA E TECNOLOGIA DEI MATERIALI
Italy

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Open Research Data Pilot (1)

Data Management Plan

Reports regarding the management of the data of the project

Documents, reports (3)

Final PEDR

Final version of PEDR

Annual report on Communication, Dissemination and Exploitation
Draft PEDR

Draft Plan for Exploitation and Dissemination of Results

Publicaciones

Other (7)

On the Evolution of Banded Microstructures in an Electron Beam Melted Ti 48Al 2Cr 2Nb Alloy

Autores: Wartbichler Reinhold; Clemens Helmut; Mayer Svea; Ghibaudo Cristian; Rizza Giovanni; Galati Manuela; Iuliano Luca; Biamino Sara; Ugues Daniele
Publicado en: Intermetallics 2021, 2022
Editor: Zenodo
DOI: 10.5281/zenodo.5749213

A study on the chemical and microstructural optimization of the Ti-48-2-2 alloy processed by Electron Beam Melting

Autores: Galati Manuela; Ghibaudo Cristian; Rizza Giovanni; Wartbichler Reinhold; Mayer Svea; Iuliano Luca; Clemens Helmut; Ugues Daniele; Biamino Sara
Publicado en: Clean Sky 2 technology progress – contribution to the environmental performance of the next generation of aircraft,, 2022
Editor: Zenodo
DOI: 10.5281/zenodo.5749200

A comparison of different approaches to study the porosity and surface defects for Electron Beam Melting

Autores: Ghibaudo Cristian; Rizza Giovanni; Marchese Giulio; Galati Manuela; Iuliano Luca; Ugues Daniele; Biamino Sara
Publicado en: Euro PM2021 Congress & Exhibition, Virtual, 17-20 October 2021, 2022
Editor: Zenodo
DOI: 10.5281/zenodo.5749375

γ-TiAl powder properties and their processability by Electron Beam Melting

Autores: Ghibaudo Cristian; Sivo Antonio; Marchese Giulio; Ugues Daniele; Biamino Sara
Publicado en: European Congress and Exhibition on Advanced Materials and Processes 2021 (EUROMAT2021), 2022
Editor: Zenodo
DOI: 10.5281/zenodo.5749384

Influence of the Process Parameters on the Densification and Microstructure of Ni-based Superalloys with Different Amount of γ′ Former Alloying Elements Processed by SLM

Autores: Marchese, Giulio; Parizia, Simone; Sivo, Antonio; Bassini, Emilio; Calignano, Flaviana; Biamino, Sara; Ugues, Daniele
Publicado en: TMS 2020 Annual Meeting & Exhibition (TMS 2020), San Diego, California, USA, 23-27 February 2020, 2020
Editor: Zenodo
DOI: 10.5281/zenodo.4094641

Combined Hot Isostatic Pressing and Rapid Quenching as a post processing option for AM parts

Autores: Ugues Daniele; Bassini Emilio; Marchese Giulio; Sivo Antonio; Martelli Pietro Antonio
Publicado en: Thermec 2021, Virtual, 10-14 May 2021, 2022
Editor: Zenodo
DOI: 10.5281/zenodo.5749225

A study on the chemical and microstructural optimization of the Ti 48 2 2 alloy processed by Electron Beam Melting

Autores: Galati Manuela; Ghibaudo Cristian; Rizza Giovanni; Wartbichler Reinhold; Mayer Svea; Iuliano Luca; Clemens Helmut; Ugues Daniele; Biamino Sara
Publicado en: Electron Beam Melting Conference 2020 (EBAM2020),, 2022
Editor: Zenodo
DOI: 10.5281/zenodo.5749363

Peer reviewed articles (2)

On the Formation Mechanism of Banded Microstructures in Electron Beam Melted Ti–48Al–2Cr–2Nb and the Design of Heat Treatments as Remedial Action

Autores: Wartbichler Reinhold; Clemens Helmut; Mayer Svea; Ghibaudo Cristian; Rizza Giovanni; Galati Manuela; Iuliano Luca; Biamino Sara; Ugues Daniele
Publicado en: Advanced Engineering Materials, 2021, ISSN 1527-2648
Editor: Wiley
DOI: 10.1002/adem.202101199

Effects of the solution and first aging treatment applied to as-built and post-HIP CM247 produced via laser powder bed fusion (LPBF)

Autores: Bassini Emilio; Sivo Antonio; Martelli Pietro Antonio; Rajczak Ewa; Marchese Giulio; Calignano Flaviana; Biamino Sara; Ugues Daniele
Publicado en: Journal of Alloys and Compounds, 2022, ISSN 0925-8388
Editor: Elsevier BV
DOI: 10.1016/j.jallcom.2022.164213