Next gEneration loW pressure TurbinE Airfoils by aM

Leistungen

Data Management Plan

Reports regarding the management of the data of the project

Final PEDR

Final version of PEDR

Annual report on Communication, Dissemination and Exploitation
Draft PEDR

Draft Plan for Exploitation and Dissemination of Results

Veröffentlichungen

On the Evolution of Banded Microstructures in an Electron Beam Melted Ti 48Al 2Cr 2Nb Alloy

Autoren: Wartbichler Reinhold; Clemens Helmut; Mayer Svea; Ghibaudo Cristian; Rizza Giovanni; Galati Manuela; Iuliano Luca; Biamino Sara; Ugues Daniele
Veröffentlicht in: Intermetallics 2021, 2022
Herausgeber: Zenodo
DOI: 10.5281/zenodo.5749213

A study on the chemical and microstructural optimization of the Ti-48-2-2 alloy processed by Electron Beam Melting

Autoren: Galati Manuela; Ghibaudo Cristian; Rizza Giovanni; Wartbichler Reinhold; Mayer Svea; Iuliano Luca; Clemens Helmut; Ugues Daniele; Biamino Sara
Veröffentlicht in: Clean Sky 2 technology progress – contribution to the environmental performance of the next generation of aircraft,, 2022
Herausgeber: Zenodo
DOI: 10.5281/zenodo.5749200

A comparison of different approaches to study the porosity and surface defects for Electron Beam Melting

Autoren: Ghibaudo Cristian; Rizza Giovanni; Marchese Giulio; Galati Manuela; Iuliano Luca; Ugues Daniele; Biamino Sara
Veröffentlicht in: Euro PM2021 Congress & Exhibition, Virtual, 17-20 October 2021, 2022
Herausgeber: Zenodo
DOI: 10.5281/zenodo.5749375

γ-TiAl powder properties and their processability by Electron Beam Melting

Autoren: Ghibaudo Cristian; Sivo Antonio; Marchese Giulio; Ugues Daniele; Biamino Sara
Veröffentlicht in: European Congress and Exhibition on Advanced Materials and Processes 2021 (EUROMAT2021), 2022
Herausgeber: Zenodo
DOI: 10.5281/zenodo.5749384

Influence of the Process Parameters on the Densification and Microstructure of Ni-based Superalloys with Different Amount of γ′ Former Alloying Elements Processed by SLM

Autoren: Marchese, Giulio; Parizia, Simone; Sivo, Antonio; Bassini, Emilio; Calignano, Flaviana; Biamino, Sara; Ugues, Daniele
Veröffentlicht in: TMS 2020 Annual Meeting & Exhibition (TMS 2020), San Diego, California, USA, 23-27 February 2020, 2020
Herausgeber: Zenodo
DOI: 10.5281/zenodo.4094641

Combined Hot Isostatic Pressing and Rapid Quenching as a post processing option for AM parts

Autoren: Ugues Daniele; Bassini Emilio; Marchese Giulio; Sivo Antonio; Martelli Pietro Antonio
Veröffentlicht in: Thermec 2021, Virtual, 10-14 May 2021, 2022
Herausgeber: Zenodo
DOI: 10.5281/zenodo.5749225

A study on the chemical and microstructural optimization of the Ti 48 2 2 alloy processed by Electron Beam Melting

Autoren: Galati Manuela; Ghibaudo Cristian; Rizza Giovanni; Wartbichler Reinhold; Mayer Svea; Iuliano Luca; Clemens Helmut; Ugues Daniele; Biamino Sara
Veröffentlicht in: Electron Beam Melting Conference 2020 (EBAM2020),, 2022
Herausgeber: Zenodo
DOI: 10.5281/zenodo.5749363

On the Formation Mechanism of Banded Microstructures in Electron Beam Melted Ti–48Al–2Cr–2Nb and the Design of Heat Treatments as Remedial Action

Autoren: Wartbichler Reinhold; Clemens Helmut; Mayer Svea; Ghibaudo Cristian; Rizza Giovanni; Galati Manuela; Iuliano Luca; Biamino Sara; Ugues Daniele
Veröffentlicht in: Advanced Engineering Materials, 2021, ISSN 1527-2648
Herausgeber: Wiley
DOI: 10.1002/adem.202101199

Effects of the solution and first aging treatment applied to as-built and post-HIP CM247 produced via laser powder bed fusion (LPBF)

Autoren: Bassini Emilio; Sivo Antonio; Martelli Pietro Antonio; Rajczak Ewa; Marchese Giulio; Calignano Flaviana; Biamino Sara; Ugues Daniele
Veröffentlicht in: Journal of Alloys and Compounds, 2022, ISSN 0925-8388
Herausgeber: Elsevier BV
DOI: 10.1016/j.jallcom.2022.164213

Leistungen

Veröffentlichungen

Diese Seite teilen

Herunterladen