CORDIS - EU research results
CORDIS

Collaborative production for the circular economy; a community approach

Deliverables

Report on maker community ecosystem and urban metabolism processes

tbd

Dissemination, Awareness raising and Communication Plan

TBD

Data Management Plan (1st version)

TBD

Incentivisation and behavioural insights methodologies

tbd

Data Management Plan (2nd version)

tbd

POP-MACHINA Integration Guide

Policy debates will lead to the creation of a compact Integration Guide which will include practical examples from the pilot areas and practical pathways and steps for the adoption of PopMachinas tools and production cases

Report on user requirements

tbd

POP-MACHINA Replication Guides

To ensure the exploitation and sustainability of PopMachinas results beyond the end of the project as well as their adoption and replication by other cities dedicated replication guides for planners makers and policy makers are developed

POP-MACHINA Urban Development Framework

tbd

Network of interest report (2nd Version)

This document presents the PopMachina Network of Interest laying out the scope of the network and its operation within the project The rationale and the steps followed for the establishment of the network are presented along with the operational principles Future activities aiming to facilitate the interaction between the PopMachina Network of Interest members and the project are also provided

Data Management Plan (3rd Version)

tbd

Engagement and ecosystem building methodologies

tbd

Innovation, Exploitation and Sustainability Plan (2nd Version)

tbd

POP-MACHINA training programme

tbd

Circular makerspaces and promotion of urban regeneration strategies

tbd

Network of interest report (1st Version)

tbd

Report on POP-MACHINA Advisory Board

TBD

Evaluation methodology

tbd

Report on framework conditions

tbd

Innovation, Exploitation and Sustainability Plan (1st Version)

tbd

Pilot Profiles

tbd

Market research report

tbd

Data Management Plan (4th Version)

the Data Management Plan DMP will cover the entire data management life cycle even beyond the end of the project

Publications

Mapping the circular maker movement: from a literature review to a circular maker passport (Deliverable 2.1)

Author(s): Metta, Julie; Bachus, Kris
Published in: Issue 1, 2020
Publisher: EU Horizon 2020 Pop-Machina project
DOI: 10.5281/zenodo.3947570

Market research report (Deliverable 2.2)

Author(s): Panori, Anastasia; Piccoli, Anna; Ozdek, Eda; Spyridopoulos, Kyrillos; Altsitsiadis, Alexandros
Published in: Issue 1, 2020
Publisher: EU Horizon 2020 Pop-Machina
DOI: 10.5281/zenodo.4010095

Dissemination, awareness raising and communication plan (Deliverable 8.1)

Author(s): Altsitsiadis, A.; Piccoli, A.
Published in: Issue 1, 2020
Publisher: EU Horizon 2020 Pop-Machina
DOI: 10.5281/zenodo.3736780

Innovation, Exploitation and Sustainability Plan

Author(s): Schiza, M.
Published in: Issue 1, 2020
Publisher: EU Horizon 2020 Pop-Machina
DOI: 10.5281/zenodo.3876870

Pop-Machina report on user requirements (Deliverable 2.5)

Author(s): Dimitriou, Angela (ed.)
Published in: Issue 1, 2020
Publisher: HIVA-KU Leuven
DOI: 10.5281/zenodo.4010097

Data management plan. 1st version (Deliverable 3.1)

Author(s): KU Leuven
Published in: Issue 1, 2020
Publisher: HIVA-KU Leuven
DOI: 10.5281/zenodo.3736775

Circular Makerspaces as entrepreneurship platforms for smart and sustainable cities. Paper presented at the 2022 7th International Conference on Smart and Sustainable Technologies (SpliTech)

Author(s): Nikolay Premyanov, Julie Metta, Margarita Angelidou, Nikolaos Tsoniotis, Christos Politis,Elli Roma Athanasiadou, and Apostolos C. Tsolaki
Published in: 2022
Publisher: Q-PLAN

Spatial clustering of waste reuse in a circular economy: A spatial autocorrelation analysis on locations of waste reuse in the Netherlands using global and local Moran’s

Author(s): Tanya Tsui, Alexis Derumigny, David Peck, Arjan van Timmeren & Alexander Wandl
Published in: Frontiers in Built Environment, Issue 8, 2022, Page(s) 954642, ISSN 2297-3362
Publisher: Frontiers Media S.A
DOI: 10.3389/fbuil.2022.954642

Circular Maker Cities: Maker space typologies and circular urban design

Author(s): Reham Elwakil; Ingrid Schroder; Koen Steemers
Published in: Buildings, Issue 13(11), 2023, Page(s) 2894, ISSN 2075-5309
Publisher: MDPI
DOI: 10.20944/preprints202310.1136.v1

The Endowment Effect in the Circular Economy: Do Broken Products Face Less of a Trading Barrier Than Intact or Repaired Ones?

Author(s): Ebo Botchway; Jan Verpooten; Ine van der Beken; Justina Baršytė; Siegfried Dewitte
Published in: Sustainability, Issue Volume 15; Issue 15, 2023, Page(s) 11813, ISSN 2071-1050
Publisher: MDPI Open Access Publishing
DOI: 10.3390/su151511813

Hybrid Makerspaces and Networks for the Circular City: A Case Study of Leuven, Belgium

Author(s): Ingrid Schroder, Reham Elwakil, Koen Steemers
Published in: Buildings, Issue 14(1), 2024, Page(s) 137, ISSN 2075-5309
Publisher: MDPI
DOI: 10.3390/buildings14010137

Make it a circular city: Experiences and challenges from European cities striving for sustainability through promoting circular making

Author(s): Aykut Coskun, Julie Metta, Yekta Bakırlıoğlu, Damla Çay, Kris Bachus
Published in: Resources, Conservation and Recycling, Issue 185, 2022, Page(s) 106495, ISSN 0921-3449
Publisher: Elsevier BV
DOI: 10.1016/j.resconrec.2022.106495

The Role of Urban Manufacturing for a Circular Economy in Cities

Author(s): T.P.Y. Tsui; David Peck; Bob Geldermans; A. Van Timmeren
Published in: Sustainability, Issue 13(1), 2021, Page(s) 23, ISSN 2071-1050
Publisher: MDPI Open Access Publishing
DOI: 10.3390/su13010023

Global goals, local future stories: unpacking contrasts and visions of circular economy activities in neighbourhood makerspaces, in De Sainz Molestina, D., Galluzzo, L., Rizzo, F., Spallazzo, D. (eds.), IASDR 2023: Life-Changing Design, 9-13 October, Milan, Italy.

Author(s): Ramírez Galleguillos, M., Çay, D.,and Coşkun, A.
Published in: 2023
Publisher: International Association of Societies of Design Research

Searching for OpenAIRE data...

There was an error trying to search data from OpenAIRE

No results available