Collaborative production for the circular economy; a community approach | Pop-Machina | Project | Results | H2020 | CORDIS

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Report on maker community ecosystem and urban metabolism processes

tbd

Dissemination, Awareness raising and Communication Plan

TBD

Data Management Plan (1st version)

TBD

Incentivisation and behavioural insights methodologies

tbd

Data Management Plan (2nd version)

tbd

POP-MACHINA Integration Guide

Policy debates will lead to the creation of a compact Integration Guide which will include practical examples from the pilot areas and practical pathways and steps for the adoption of PopMachinas tools and production cases

Report on user requirements

tbd

POP-MACHINA Replication Guides

To ensure the exploitation and sustainability of PopMachinas results beyond the end of the project as well as their adoption and replication by other cities dedicated replication guides for planners makers and policy makers are developed

POP-MACHINA Urban Development Framework

tbd

Network of interest report (2nd Version)

This document presents the PopMachina Network of Interest laying out the scope of the network and its operation within the project The rationale and the steps followed for the establishment of the network are presented along with the operational principles Future activities aiming to facilitate the interaction between the PopMachina Network of Interest members and the project are also provided

Data Management Plan (3rd Version)

tbd

Engagement and ecosystem building methodologies

tbd

Innovation, Exploitation and Sustainability Plan (2nd Version)

tbd

POP-MACHINA training programme

tbd

Circular makerspaces and promotion of urban regeneration strategies

tbd

Network of interest report (1st Version)

tbd

Report on POP-MACHINA Advisory Board

TBD

Evaluation methodology

tbd

Report on framework conditions

tbd

Innovation, Exploitation and Sustainability Plan (1st Version)

tbd

Pilot Profiles

tbd

Market research report

tbd

Data collection and analysis tool (2nd Version)

This document presents the Pop-Machina platform component that will support the data collection and analysis in the scope of the project. The core of the component consists of two modules which correspond to (i) the participatory data collection and (ii) the data aggregation and analysis functionalities.

Social collaboration platform (1st Version)

tbd

Open knowledge tool (1st Version)

tbd

Value chain certification framework (2nd Version)

This deliverable documents the concepts and the first implementation around the value chain certification as they are envisioned at that time and incorporated into Pop-Machina’s social collaboration platform (SCP) before any of the pilots were able to set up their makerspace.

Tokenisation of work framework and makerspace marketplace (2nd Version)

This deliverable documents the technical aspects and the implementation of the circular maker ecosystem tokenization of work subcomponent and how this has been incorporated into the Pop-Machina’s Social Collaboration Platform (SCP).

Social collaboration platform (2nd Version)

This deliverable is a demonstrator software and this accompanying report provides information around the technologies that were used to implement the first version of the Social Collaboration Platform (SCP) and the technologies that connect and integrate the rest of the platform’s subcomponents with it.

Data collection and analysis tool (1st Version)

tbd

Value chain certification framework (1st Version)

tbd

Open knowledge tool (2nd Version)

The Open Knowledge Tool described in this document is an online user-friendly platform that lets the different users to access and share their maker knowledge and contribute to the community. Within this deliverable, the basis of the Open Knowledge Tool is described, including the rationale behind the technologies used, the functionalities provided and the requirements covered, as well as the mockups of the first platform release and the most indicative use case scenarios for the tool

Tokenisation of work framework and makerspace marketplace (1st Version)

tbd

Data Management Plan (4th Version)

the Data Management Plan DMP will cover the entire data management life cycle even beyond the end of the project

Dissemination Pack

tbd

Publicaciones

Mapping the circular maker movement: from a literature review to a circular maker passport (Deliverable 2.1)

Autores: Metta, Julie; Bachus, Kris
Publicado en: Edición 1, 2020
Editor: EU Horizon 2020 Pop-Machina project
DOI: 10.5281/zenodo.3947570

Market research report (Deliverable 2.2)

Autores: Panori, Anastasia; Piccoli, Anna; Ozdek, Eda; Spyridopoulos, Kyrillos; Altsitsiadis, Alexandros
Publicado en: Edición 1, 2020
Editor: EU Horizon 2020 Pop-Machina
DOI: 10.5281/zenodo.4010095

Dissemination, awareness raising and communication plan (Deliverable 8.1)

Autores: Altsitsiadis, A.; Piccoli, A.
Publicado en: Edición 1, 2020
Editor: EU Horizon 2020 Pop-Machina
DOI: 10.5281/zenodo.3736780

Innovation, Exploitation and Sustainability Plan

Autores: Schiza, M.
Publicado en: Edición 1, 2020
Editor: EU Horizon 2020 Pop-Machina
DOI: 10.5281/zenodo.3876870

Pop-Machina report on user requirements (Deliverable 2.5)

Autores: Dimitriou, Angela (ed.)
Publicado en: Edición 1, 2020
Editor: HIVA-KU Leuven
DOI: 10.5281/zenodo.4010097

Circular Makerspaces as entrepreneurship platforms for smart and sustainable cities. Paper presented at the 2022 7th International Conference on Smart and Sustainable Technologies (SpliTech)

Autores: Nikolay Premyanov, Julie Metta, Margarita Angelidou, Nikolaos Tsoniotis, Christos Politis,Elli Roma Athanasiadou, and Apostolos C. Tsolaki
Publicado en: 2022
Editor: Q-PLAN

Spatial clustering of waste reuse in a circular economy: A spatial autocorrelation analysis on locations of waste reuse in the Netherlands using global and local Moran’s

Autores: Tanya Tsui, Alexis Derumigny, David Peck, Arjan van Timmeren & Alexander Wandl
Publicado en: Frontiers in Built Environment, Edición 8, 2022, Página(s) 954642, ISSN 2297-3362
Editor: Frontiers Media S.A
DOI: 10.3389/fbuil.2022.954642

Circular Maker Cities: Maker space typologies and circular urban design

Autores: Reham Elwakil; Ingrid Schroder; Koen Steemers
Publicado en: Buildings, Edición 13(11), 2023, Página(s) 2894, ISSN 2075-5309
Editor: MDPI
DOI: 10.20944/preprints202310.1136.v1

The Endowment Effect in the Circular Economy: Do Broken Products Face Less of a Trading Barrier Than Intact or Repaired Ones?

Autores: Ebo Botchway; Jan Verpooten; Ine van der Beken; Justina Baršytė; Siegfried Dewitte
Publicado en: Sustainability, Edición Volume 15; Edición 15, 2023, Página(s) 11813, ISSN 2071-1050
Editor: MDPI Open Access Publishing
DOI: 10.3390/su151511813

Hybrid Makerspaces and Networks for the Circular City: A Case Study of Leuven, Belgium

Autores: Ingrid Schroder, Reham Elwakil, Koen Steemers
Publicado en: Buildings, Edición 14(1), 2024, Página(s) 137, ISSN 2075-5309
Editor: MDPI
DOI: 10.3390/buildings14010137

Make it a circular city: Experiences and challenges from European cities striving for sustainability through promoting circular making

Autores: Aykut Coskun, Julie Metta, Yekta Bakırlıoğlu, Damla Çay, Kris Bachus
Publicado en: Resources, Conservation and Recycling, Edición 185, 2022, Página(s) 106495, ISSN 0921-3449
Editor: Elsevier BV
DOI: 10.1016/j.resconrec.2022.106495

The Role of Urban Manufacturing for a Circular Economy in Cities

Autores: T.P.Y. Tsui; David Peck; Bob Geldermans; A. Van Timmeren
Publicado en: Sustainability, Edición 13(1), 2021, Página(s) 23, ISSN 2071-1050
Editor: MDPI Open Access Publishing
DOI: 10.3390/su13010023

Global goals, local future stories: unpacking contrasts and visions of circular economy activities in neighbourhood makerspaces, in De Sainz Molestina, D., Galluzzo, L., Rizzo, F., Spallazzo, D. (eds.), IASDR 2023: Life-Changing Design, 9-13 October, Milan, Italy.

Autores: Ramírez Galleguillos, M., Çay, D.,and Coşkun, A.
Publicado en: 2023
Editor: International Association of Societies of Design Research

Conjuntos de datos

Data and code underlying the publication: Spatial optimization of circular timber hubs

Autores: Tsui, Tanya; Venverloo, Titus; Duarte, Fabio; Benson, Tom
Publicado en: 4TU.ResearchData

Data underlying the publication: The role of urban manufacturing for a circular economy in cities

Autores: Tsui, Tanya; Peck, David; van Timmeren, Arjan; Wandl, Alexander
Publicado en: 4TU.ResearchData

Maker Movement Initiatives and Characteristics

Autores: Metta, Julie (10715241); Bachus, Kris (10715244)
Publicado en: Zenodo

Data collected from questionnaires to collect feedback on the services' performance / accelerator programme and outcomes

Autores: Q-Plan International
Publicado en: Zenodo

Data, code and results underlying the publication: Spatial clustering of waste reuse in a circular economy

Autores: Tsui, Tanya; Derumigny, Alexis; Peck, David; van Timmeren, Arjan; Wandl, Alexander
Publicado en: 4TU.ResearchData

Data underlying the publication: Spatial Parameters for Circular Construction Hubs

Autores: Tsui, Tanya; Furlan, C. (Cecilia); Wandl, Alexander; van Timmeren, Arjan
Publicado en: 4TU.ResearchData

Publicaciones

Conjuntos de datos

Compartir esta página

Descargar