Skip to main content
European Commission logo print header

European Flexible hEat Shields: advanced TPS design and tests for future in-Orbit demonstration

Descripción del proyecto

La mayor madurez de los escudos térmicos inflables

El objetivo del proyecto financiado con fondos europeos EFESTO es aumentar de tres a cinco el nivel de madurez tecnológica de los protectores térmicos inflables para vehículos de reentrada y facilitar el paso al nivel seis de madurez con un futuro demostrador en órbita. Estos escudos térmicos innovadores reducen la velocidad y protegen las cargas útiles del calor que se genera al reentrar en la atmósfera. El sistema está compuesto por estructuras inflables y capas de un sistema de protección térmica flexible (F-TPS, por sus siglas en inglés) de materiales avanzados. EFESTO ofrece nuevos conceptos de misión espacial más allá de los límites actuales impuestos por el tamaño del carenado del lanzador o los aspectos geométricos y estructurales de los escudos térmicos rígidos. Las tecnologías que cambian de forma permiten, por ejemplo, aterrizar cargas útiles más grandes o más pesadas en Marte o reutilizar las etapas superiores de los lanzadores, lo que reduce el coste de acceso al espacio.

Objetivo

The EFESTO (European Flexible hEat Shields: advanced TPS design and tests for future in-Orbit demonstration) end goal is to improve the TRL of Inflatable Heat Shields for re-entry vehicles from 3 to 4/5, and pave the way towards further improvements (TRL 6 with a future In-Orbit Demonstrator).
EFESTO aims at (1) the definition of critical space mission scenarios (Earth and Mars applications) enabled by the use of advanced inflatable Thermal Protection Systems (TPS), (2) characterization of the operative environment and (3) validation by tests of both the flexible materials needed for the thermal protection (flexible thermal blanket will be tested in arcjet facility in both Earth and Martian environments) and the inflatable structure at 1:1 scale (exploring the morphing dynamics and materials response from packed to fully inflated configuration). These results will be injected into the consolidated design of a future In-Orbit Demonstrator mission.
Fully in line with the call subtopic b, EFESTO will provide advances in the three areas of thermal control, materials and structures through the design and testing of innovative inflatable TPS solutions for re-entry vehicles. It will enable new space mission concepts, which require bringing a payload from space to ground of a planetary body with an atmosphere beyond the current limits imposed by launcher fairing size or rigid heat shields geometrical and structural aspects. Morphing solutions will allow for example landing bigger or heavier payload on Mars or will enable the reusability of launchers upper stages enhancing European reusability and cost reductions in the access to space industry. Non space applications in the areas of materials and structures will also be considered.
Leveraging on the consortium background and on past, current and planned tests results in the field, competitiveness in the space sector will be fostered and key contributions to the long term European re-entry technology roadmap will be provided

Convocatoria de propuestas

H2020-SPACE-2018-2020

Consulte otros proyectos de esta convocatoria

Convocatoria de subcontratación

H2020-SPACE-2018

Régimen de financiación

RIA - Research and Innovation action

Coordinador

DEIMOS SPACE SOCIEDAD LIMITADA UNIPERSONAL
Aportación neta de la UEn
€ 295 030,00
Dirección
RONDA DE PONIENTE, Edificio Fiteni VI, 2, 2º 19
28760 Tres Cantos (Madrid)
España

Ver en el mapa

Región
Comunidad de Madrid Comunidad de Madrid Madrid
Tipo de actividad
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Enlaces
Coste total
€ 395 220,00

Participantes (6)