Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS

Development and design of novel multiFUNctional PEO COATings

Descripción del proyecto

Un mejor tratamiento de superficies podría otorgar nuevas funciones a las superficies metálicas

Financiado por las Acciones Marie Skłodowska-Curie, el equipo del proyecto FUNCOAT tiene previsto desarrollar superficies multifuncionales mediante la aplicación de la oxidación electrolítica por plasma ecológica. Esta tecnología de recubrimiento de superficies produce revestimientos de óxido en la superficie de los metales para que tengan una resistencia alta a la corrosión y al desgaste. El trabajo del proyecto se orientará a mejorar aún más la tolerancia a los fallos, la protección contra los daños por corrosión y el comportamiento tribológico. Además, los investigadores tratarán de añadir un conjunto de funcionalidades menos comunes en el recubrimiento, dotándolo de una mejor actividad fotocatalítica, conductividad térmica y eléctrica y comportamiento magnético. Estas propiedades adicionales podrían ayudar a ampliar el número de aplicaciones en las que se puede seguir este proceso de tratamiento de superficies.

Objetivo

The main objective of the proposal is the development of multi-purpose, multi-functional surfaces via environmentally friendly plasma electrolytic oxidation (PEO) treatments. In an intelligent way the weakness of the PEO process (the inherent porosity due to the discharges forming the coating is often responsible for poor properties) is used to functionalize the coating using the open pore structure as a reservoir for nanocontainer or to bring particles with certain functionalities deep into the coatings (fast pathways). The main targeted functionalities, are enhanced fault tolerance and active protection against corrosive damage as well as improved tribological behavior. Moreover, to extend this typical field of applications of PEO treatments and address additional industries and aspects (e.g. 3C, ecological), a set of less common functionalities, such as photocatalytic, magnetic, thermo- and electroconductivity will be added. This is challenging and goes far beyond the state-of-the-art introduction via post-treatments. To deal with such sensitive materials, changes in the power supply are required and this is addressed as one of the key points in frame of the project as well.
The essential key of the project is the formation and development of an interdisciplinary R&D partnership, where participants from both academia (5) and private sector (4 SME) participate, promoting and sharing their ideas, expertise, techniques and methods to solve this demanding challenge. This partnership will be beneficial for all participants, since new PEO hardware, environmentally friendly processes and applications important for industry are developed, evaluated and promoted by the research institutions via presentations and publications of the obtained results. Laboratory based training and intersectional transfer of knowledge are the key aspects of the FUNCOAT project, so the partnership gathers the topmost competences to carry out the suggested research program.

Ámbito científico (EuroSciVoc)

Palabras clave

Programa(s)

Tema(s)

Régimen de financiación

MSCA-RISE - Marie Skłodowska-Curie Research and Innovation Staff Exchange (RISE)

Ver todos los proyectos financiados en el marco de este régimen de financiación

Convocatoria de propuestas

(se abrirá en una nueva ventana) H2020-MSCA-RISE-2018

Ver todos los proyectos financiados en el marco de esta convocatoria

Coordinador

HELMHOLTZ-ZENTRUM HEREON GMBH
Aportación neta de la UEn
€ 69 027,68
Dirección
MAX PLANCK STRASSE 1
21502 GEESTHACHT
Alemania
Región
Schleswig-Holstein Schleswig-Holstein Herzogtum Lauenburg
Tipo de actividad
Research Organisations
Enlaces
Coste total
€ 271 400,00

Participantes (8)

Socios (4)