Description du projet
Des émetteurs-récepteurs haute vitesse pour les interconnexions Terabit Ethernet des centres de données
Le 400 Gigabit Ethernet (400G) a ouvert une voie vers des vitesses de transfert des données plus rapides, répondant aux demandes croissantes de bande passante des centres de données en nuage. Bien que les émetteurs-récepteurs optiques du 400G soient impressionnants, le calcul de haute performance et l’intelligence artificielle nécessiteront des vitesses plus élevées. Le projet TERIPHIC, financé par l’UE, entend développer une nouvelle génération de modules d’émetteurs-récepteurs semi-embarqués et enfichables dont les vitesses pourront atteindre entre 800 Gbit/s et 1,6 Tbit/s. L’attention sera portée sur la simplification de la conception de l’émetteur-récepteur en réduisant le nombre d’interfaces intégrées et sur le développement du matériel nécessaire à l’automatisation du processus d’assemblage. Les modules optiques du 800G réduiront la consommation d’électricité de 50 % par Gbit/s par rapport à leurs homologues du 400G.
Objectif
Efforts to develop optical interfaces with Terabit capacity for datacom applications have kicked off. A practical path to the Terabit regime is to scale the current 400G modules, which are based (in the most forward looking version of the standards) on 4 parallel lanes, each operating with PAM-4 at 53 Gbaud. Scaling these modules by adding lanes looks simple, but entails challenges with respect to the fabrication and assembly complexity that can critically affect their manufacturability and cost. TERIPHIC aims to address these challenges by leveraging photonic integration concepts and developing a seamless chain of component fabrication, assembly automation and module characterization processes as the basis for high-volume production lines of Terabit modules. TERIPHIC will bring together EML arrays in the O-band, PD arrays and a polymer chip that will act as the host platform for the integration of the arrays and the wavelength mux-demux of the lanes. The integration will rely on butt-end-coupling steps, which will be automated via the development of module specific alignment and attachment processes on commercial equipment. The optical subassembly will be mounted on the mainboard of the module together with linear driver and TIA arrays. The assembly process will be based on the standard methodologies of MLNX and the use of polymer FlexLines for the interconnection of the optical subassembly with the drivers and the TIAs. Using these methods, TERIPHIC will develop pluggable modules with 8 lanes (800G capacity) and mid-board modules with 16 lanes (1.6T capacity) having a reach of at least 2 km. Compared to the 400G standards, the modules will reduce by 50% the power consumption per Gb/s, and will have a cost of 0.3 Euro/Gb/s. After assembly, the modules will be mounted on the line cards of MLNX switches, and will be tested in real settings. A study for the consolidation of the methods and the set up of a pilot assembly line in the post-project era will be also made.
Champ scientifique
Mots‑clés
Programme(s)
Régime de financement
IA - Innovation actionCoordinateur
106 82 ATHINA
Grèce