ERA Chair for emerging technologies and innovative research in Stretchable and Textile Electronics

Información del proyecto

STRENTEX

Identificador del acuerdo de subvención: 854194

DOI

10.3030/854194

Proyecto cerrado

Fecha de la firma de la CE 20 Junio 2019

Fecha de inicio 1 Enero 2020

Fecha de finalización 31 Diciembre 2024

Financiado con arreglo a

• Establishing ‚ERA Chairs’

Coste total

€ 2 475 500,00

Aportación de la UE

€ 2 475 500,00

Coordinado por

UNIVERZITET U NOVOM SADU FAKULTET TEHNICKIH NAUKA
Serbia

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Open Research Data Pilot (1)

Data managment plan

This Deliverable will outline how research data will be handled during the project and after finalisation.

Websites, patent fillings, videos etc. (3)

Setting and updating the Project web site and social media 2

The STRENTEX web portal will be set up at the very beginning of the Project and will be regularly updated and this Deliverable will report on the visual project identity as well as project presence at social media such as Facebook Twitter Instagram LinkedIn

Setting and updating the Project web site and social media 3

The STRENTEX web portal will be set up at the very beginning of the Project and will be regularly updated and this Deliverable will report on the visual project identity as well as project presence at social media such as Facebook, Twitter, Instagram, LinkedIn.

Setting and updating the Project web site and social media 1

The STRENTEX web portal will be set up at the very beginning of the Project and will be regularly updated and this Deliverable will report on the visual project identity as well as project presence at social media such as Facebook, Twitter, Instagram, LinkedIn

Documents, reports (18)

Report1 on attended scientific conferences

ERA Chair holder and involved staff will present results of the research at conferences and symposium in the field and the list of conferences will be presented in this Deliverable.

Report2 from the technical fairs participation

The STRENTEX project will have a booth on at least 2 technical fairs in the field of large-area electronics or printed electronics (e.g. LOPE-C, Productronica) in order to present innovative demonstrators and prototypes and this Deliverable will report from these events.

Report2 on prepared and submitted new follow-up proposals

This Deliverable will describe shortly new project proposals which will be created and submitted for open calls with H2020 and Horizon Europe in order to provide sustainability of the ERA Chair team.

Report on established spin-off company in the field

This deliverable will explain formal procedure for establishment a new spin-off in the project field as well as all activities to reach this stage, such as organization of round-tables with stakeholders and industry representatives.

Report1 on prepared and submitted new follow-up proposals

This Deliverable will describe shortly new project proposals which will be created and submitted for open calls with H2020 and Horizon Europe in order to provide sustainability of the ERA Chair team

Report on organized training events

This Deliverable will reports from Summer School Workshop 1 and Seminar 1 which will be organized within the project lifespan

Report on organized Final conference

This Deliverable will report from the final international conference which will be organized in order to present the most important results of the project. ERA Chair members will be invited to prepare a summary of their achievements in the form of manuscripts and monograph will be published.

Selection report for ERA Chair team members

This Deliverable will describe the complete procedure of selection of members of ERA Chair team. The recruitment process will be in compliance with the ERA priorities, rewarding achievement and rejecting mediocrity. Team member full-time positions will be open for: 1 Established Researcher, 2 Recognized Researchers and 4 First Stage Researchers.

Report on procuring research equipment for ERA Chair

This Deliverable will describe the procedure for purchasing equipment which is deemed necessary to fulfil the Project objectives (minor part of the project budget). The sophisticated pieces of equipment (Screen Stencil Printer, Embroidery machine for e-textile and Instrument for stretch tests) will be purchased in order to enable high-tech research in the Project field. These pieces complement the existing equipment at the FTN, in the project domain.

Report2 on attended scientific conferences

ERA Chair holder and involved staff will present results of the research at conferences and symposium in the field and the list of conferences will be presented in this Deliverable

Report1 on establishment of CESTE

This Deliverable will cover the formal procedure for establishment of the Center for stretchable and textile electronics CESTE which will be led by the ERA Chair holder and their roles and results

ERA Chair holder appointment report

This Deliverable will be a report on the selection process of the ERA Chair holder, including the text of the vacancy notice, places of publication, composition of the selection panel, CVs of applicants, minutes of selection panel meeting(s) as well as any other document allowing for a full assessment of the openness of the selection procedure.

Report1 on outreach activities

This Deliverable will report from events such as Festival of sciences, Researchers' nights, open door days and info days, intended to engage general pubic in the project topic.

Report2 on establishment of CESTE

This Deliverable will cover the formal procedure for establishment of the Center for stretchable and textile electronics (CESTE) which will be led by the ERA Chair holder and their roles and results.

Report2 on outreach activities

This Deliverable will report from events such as Festival of sciences Researchers nights open door days and info days intended to engage general pubic in the project topic

Report3 on attended scientific conferences

ERA Chair holder and involved staff will present results of the research at conferences and symposium in the field and the list of conferences will be presented in this Deliverable.

Report1 from the technical fairs participation

The STRENTEX project will have a booth on at least 2 technical fairs in the field of largearea electronics or printed electronics eg LOPEC Productronica in order to present innovative demonstrators and prototypes and this Deliverable will report from these events

Report3 on outreach activities

This Deliverable will report from events such as Festival of sciences, Researchers' nights, open door days and info days, intended to engage general pubic in the project topic.

Publicaciones

Peer reviewed articles (55)

Influence of stitch type division and geometry on the electrical properties of conductive embroidered structures

Autores: Hima Zafar, Milica Vučinić Vasić, Željko Popović, Kalman Babković, Goran M. Stojanović
Publicado en: Journal of Industrial Textiles, Edición vol. 53, 2023, Página(s) pp. 1-20, ISSN 1528-0837
Editor: SAGE Publications
DOI: 10.1177/15280837231206556

Comprehensive Review on Wearable Sweat-Glucose Sensors for Continuous Glucose Monitoring

Autores: Hima Zafar, Asma Channa, Varun Jeoti, Goran M. Stojanović
Publicado en: Sensors, Edición 22(2), 638, 2022, Página(s) 1-35, ISSN 1424-8220
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s22020638

Wearable Device for Personalized EMG Feedback-based Treatments

Autores: Mitar Simić, Goran M. Stojanović
Publicado en: Results in Engineering, Edición vol. 23, 102472, 2024, Página(s) 1-14, ISSN 2590-1230
Editor: Elsevier BV
DOI: 10.1016/j.rineng.2024.102472

Portable Respiration Monitoring System with an Embroidered Capacitive Facemask Sensor

Autores: Mitar Simić, Adrian K. Stavrakis, Ankita Sinha, Velibor Premčevski, Branko Markoski, Goran M. Stojanović
Publicado en: Biosensors, Edición 12(5), 339, 2022, Página(s) 1-23, ISSN 2079-6374
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/bios12050339

A novel method for in-situ extracting bio-impedance model parameters optimized for embedded hardware

Autores: Mitar Simić, Todd J. Freeborn, Tomislav B. Šekara, Adrian K. Stavrakis, Varun Jeoti, Goran M. Stojanović
Publicado en: Scientific Reports, Edición 13 (1), 2023, Página(s) 1-12, ISSN 2045-2322
Editor: Nature Publishing Group
DOI: 10.1038/s41598-023-31860-w

Impact of Various Wearability Conditions on the Performances of Meander-Line Z-Shaped Embroidered Antenna

Autores: Adnan E. Ali, Goran M. Stojanović, Varun Jeoti, Dalibor Sekulić, Ankita Sinha
Publicado en: International Journal of Antennas and Propagation, Edición 16875869, 2022, Página(s) 1-15, ISSN 1687-5869
Editor: Hindawi Publishing Corporation
DOI: 10.1155/2022/6741689

A fully textile-based, tunable, force and strain sensing resistor for e-textile applications

Autores: Adrian Stavrakis, Mitar Simić, Mirjana Damnjanović, Goran M Stojanović
Publicado en: Heliyon, Edición 10 (2024) e26069, 2024, Página(s) 1-10, ISSN 2405-8440
Editor: Elsevier Ltd
DOI: 10.1016/j.heliyon.2024.e26069

Textile-based electrochemical sensors and their applications

Autores: Ankita Sinha; null Dhanjai; Adrian K. Stavrakis; Goran M. Stojanović
Publicado en: Talanta, Edición 244, 2022, Página(s) 123425, ISSN 0039-9140
Editor: Elsevier BV
DOI: 10.1016/j.talanta.2022.123425

Parameter Estimation of 2R-1C Circuit using Embedded Hardware and Measured Impedance Modulu

Autores: Mitar Simić, Goran M. Stojanović
Publicado en: Journal of Circuits, Systems and Computers, Edición vol. 23, no. 15, 2023, Página(s) 2450089 (13 pages), ISSN 0218-1266
Editor: World Scientific Publishing Co
DOI: 10.1142/s0218126624500890

A Portable Device for Passive LC Sensors Readout with Low-Coupling Enhanced Sensitivity

Autores: Mitar Simić, Adrian K. Stavrakis, Milan Radovanović, Asif Iqbal, Varun Jeoti, Goran M. Stojanović
Publicado en: IEEE Transactions on Instrumentation & Measurement, Edición 2001012, 2022, Página(s) 1-8, ISSN 0018-9456
Editor: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tim.2022.3232089

Wireless Readout of Resistive Sensors

Autores: Mitar Simić, Milan Radovanović, Adrian K. Stavrakis, Varun Jeoti
Publicado en: IEEE Sensors Journal, Edición Vol. 22, No. 5, 2022, Página(s) 4235-4245, ISSN 1530-437X
Editor: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsen.2022.3145875

Parameter extraction of the Cole-impedance model for in-situ monitoring of electrochemical sources

Autores: Mitar Simić, Varun Jeoti, Goran M. Stojanović
Publicado en: Journal of Energy Storage, Edición 77 (2024) 109895, 2024, Página(s) pp. 1-13, ISSN 2352-152X
Editor: Elsevier
DOI: 10.1016/j.est.2023.109895

FEM Analysis of Various Multilayer Structures for CMOS Compatible Wearable Acousto-Optic Devices

Autores: Mehwish Hanif, Varun Jeoti, Mohamad Radzi Ahmad, Muhammad Zubair Aslam, Saima Qureshi, Goran Stojanovic
Publicado en: Sensors, Edición 21(23), 7863, 2021, ISSN 1424-8220
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s21237863

A Low-Complexity Method for Parameter Estimation of the Simplified Randles Circuit with Experimental Verification

Autores: Mitar Simić, Adrian K. Stavrakis, Goran M. Stojanović
Publicado en: IEEE Sensors Journal, Edición Vol. 21, No. 21, 2021, Página(s) 24209-24217, ISSN 1530-437X
Editor: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsen.2021.3110296

Cost-Effective Solution for Resonance-Based Capacitive Sensors Readout

Autores: Mitar Simić, Goran Stojanović
Publicado en: IEEE Transactions on Instrumentation and Measurement, Edición 74, 2025, Página(s) 1-9, ISSN 0018-9456
Editor: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tim.2025.3527546

Performance Evaluation of Dental Flosses Pre- and Post-Utilization

Autores: Adrian K. Stavrakis, Sanja Kojić, Bojan Petrović, Isidora Nešković, Goran M. Stojanović
Publicado en: Materials, Edición 15(4), 1522, 2022, Página(s) 1-14, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma15041522

Textile-based heating system for safe localized warts treatment

Autores: Mitar Simić, Adrian K. Stavrakis, Lazar Milić, Milica Vučinić-Vasić, Goran M. Stojanović
Publicado en: Journal of Science: Advanced Materials and Devices, Edición 8 (2023) 100607, 2023, Página(s) pp. 1-12, ISSN 2468-2284
Editor: Elsevier B.V
DOI: 10.1016/j.jsamd.2023.100607

A Randles Circuit Parameter Estimation of Li-Ion Batteries With Embedded Hardware

Autores: Mitar Simić, Adrian K. Stavrakis, Varun Jeoti, Goran M. Stojanović
Publicado en: IEEE Transactions on Instrumentation and Measurement, Edición 71, 1004312, 2022, Página(s) 1-12, ISSN 0018-9456
Editor: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tim.2022.3183661

Advancing Multiband OFDM Channel Sounding: An Iterative Time Domain Estimation for Spectrally Constrained Systems

Autores: Asif Iqbal, Micheal Drieberg, Varun Jeoti, Azrina Binti Abd Aziz, Goran M. Stojanović, Mitar Simić, Nazabat Hussain
Publicado en: IEEE Access, Edición vol. 11, 2023, Página(s) pp. 103333-103349, ISSN 2169-3536
Editor: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/access.2023.3317431

Review of Fabrication of SAW Sensors on Flexible Substrates: Challenges and Future

Autores: Saima Qureshi, Mehwish Hanif, Varun Jeoti, Goran M. Stojanović, Muhammad T. Khan
Publicado en: Results in Engineering, Edición 22 (2024), 2024, Página(s) 102323, ISSN 2590-1230
Editor: Elsevier BV
DOI: 10.1016/j.rineng.2024.102323

Sensing system based on knitted electrodes for fruit quality evaluation

Autores: Tijana Kojic, Mitar Simić, Milica Vučinić-Vasić, Goran M. Stojanović
Publicado en: Journal of Food Engineering, Edición vol. 353, 111544, 2023, ISSN 0260-8774
Editor: Elsevier BV
DOI: 10.1016/j.jfoodeng.2023.111544

Silver Thread‐Based Microfluidic Platform for Detection of Essential Oils Using Impedance Spectroscopy

Autores: Tijana Kojić, Božica Kovačević, Ankita Sinha, Mitar Simić, Goran Stojanović
Publicado en: Applied Sciences, Edición 2022, 12(7), 2022, Página(s) 3996-3607, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app12073596

Parameter Estimation of the Randles Equivalent Electrical Circuit Using Only Real Part of the Impedance

Autores: Mitar Simić, Adrian K. Stavrakis, Tijana Kojić, Varun Jeoti, Goran M. Stojanović
Publicado en: IEEE Sensors Journal, Edición vol. 23, no. 5, 2023, Página(s) 4922-4929, ISSN 1530-437X
Editor: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsen.2023.3238074

Polymer-Thread-Based Fully Textile Capacitive Sensor Embroidered on a Protective Face Mask for Humidity Detection

Autores: Ankita Sinha, Adrian K. Stavrakis, Mitar Simic, Goran M. Stojanovic
Publicado en: ACS Omega, Edición 2022, 7, 2022, Página(s) 44928−44938, ISSN 2470-1343
Editor: ACS - American Chemical Society
DOI: 10.1021/acsomega.2c05162

Portable Heating and Temperature Monitoring System with a Textile Heater Embroidered on the Facemask

Autores: Mitar Simić, Adrian K. Stavrakis and Goran M. Stojanović
Publicado en: ACS Omega, Edición 7, 50, 2022, Página(s) 47214–47224, ISSN 2470-1343
Editor: American Chemical Society
DOI: 10.1021/acsomega.2c06431

Silver Conductive Threads-Based Embroidered Electrodes on Textiles as Moisture Sensors for Fluid Detection in Biomedical Applications

Autores: Qureshi, Saima, Goran M. Stojanović, Mitar Simić, Varun Jeoti, Najeebullah Lashari, and Farooq Sher
Publicado en: Materials, Edición 14(24), 7813, 2021, Página(s) 1-21, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma14247813

Wearable humidity sensor embroidered on a commercial face mask and its electrical properties

Autores: Ankita Sinha, Adrian K. Stavrakis, Mitar Simić, Goran M. Stojanović
Publicado en: Journal of Materials Science, Edición 58, 2023, Página(s) 1680–1693, ISSN 0022-2461
Editor: Kluwer Academic Publishers
DOI: 10.1007/s10853-022-08135-2

Flexible polyamide-based dental floss sensor for pH monitoring

Autores: Ankita Sinha, Adrian K. Stavrakis, Saima Qureshi, Goran M. Stojanović
Publicado en: Materials Letters, Edición 326 (2022) 132971, 2022, Página(s) 1-4, ISSN 0167-577X
Editor: Elsevier BV
DOI: 10.1016/j.matlet.2022.132971

Gold Leaf-Based Microfluidic Platform for Detection of Essential Oils Using Impedance Spectroscopy

Autores: Ankita Sinha, Adrian K. Stavrakis, Mitar Simić, Sanja Kojić, Goran M. Stojanović
Publicado en: Biosensors, Edición 12(12), 1169, 2022, Página(s) 1-12, ISSN 2079-6374
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/bios12121169

A Flexible Multiband Multicarrier Signal Design for Broadband Channel Sounding Applications

Autores: Asif Iqbal, Micheal Drieberg, Varun Jeoti, Azrina Binti Abd Aziz, Goran M. Stojanović, Mitar Simić, Nazabat Hussain
Publicado en: Human-centric Computing and Information Sciences, Edición vol. 12, no. 19, 2022, Página(s) 1-17, ISSN 2192-1962
Editor: Springer Science + Business Media
DOI: 10.22967/hcis.2022.12.019

Parameter Estimation of the Single-Dispersion Fractional Cole-Impedance Model With the Embedded Hardware

Autores: Mitar Simić, Todd J. Freeborn, Mladen Veletić, Fernando Seoane, Goran M. Stojanović
Publicado en: IEEE Sensors journal, Edición vol. 23, no. 12, 2023, Página(s) 12978-12987, ISSN 1530-437X
Editor: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsen.2023.3269952

Investigation of electrical performances of textile conductive lines under different connector configurations and external influences

Autores: Lazar Milić, Dejan Movrin, Mitar Simić, Varun Jeoti, Goran Stojanović
Publicado en: Textile Research Journal, Edición 0(0), 2022, Página(s) 1-14, ISSN 0040-5175
Editor: SAGE Publications
DOI: 10.1177/00405175221145553

Textile-based wearable device for detection of date rape drugs in drinks

Autores: Goran M Stojanović, Lazar Milić, Ali A Endro, Mitar Simić, Ines Nikolić, Miroslav Savić, Snežana Savić
Publicado en: Textile Research Journal, Edición 2023, 2023, Página(s) 1-14, ISSN 0040-5175
Editor: SAGE Publications
DOI: 10.1177/00405175231218740

Comparison of Performances of Flexible Tailor-Made Force Sensing Resistors Fabricated Using Inkjet and Xurographic Techniques

Autores: Goran Stojanović, Milan Radovanović, Dragana Vasiljević, Tijana Kojić, Bojana Pivaš, Tatjana Puškar, Sunil Kapadia, Reinhard Baumann
Publicado en: Journal of Sensors, Edición 2019, 2019, Página(s) 1-8, ISSN 1687-725X
Editor: Hindawi Publishing Corporation
DOI: 10.1155/2019/9181492

Artificial neural networks for optimising camera-based colour measurements of prints enhanced with pearlescent pigments

Autores: Ivana Tomić, Sandra Dedijer, Dragoljub Novaković, Ivana Jurič
Publicado en: Coloration Technology, Edición 134/5, 2018, Página(s) 364-372, ISSN 1472-3581
Editor: Society of Dyers and Colourists
DOI: 10.1111/cote.12346

Flexible sensors based on two conductive electrodes and MWCNTs coating for efficient pH value measurement

Autores: Goran Stojanović, Tijana Kojić, Milan Radovanović, Dragana Vasiljević, Sanja Panić, Vladimir Srdić, Jelena Cvejić
Publicado en: Journal of Alloys and Compounds, Edición 794, 2019, Página(s) 76-83, ISSN 0925-8388
Editor: Elsevier BV
DOI: 10.1016/j.jallcom.2019.04.243

Colour fastness to washing of multi-layered digital prints on textile materials

Autores: Nemanja Kašiković, Gojko Vladić, Neda Milić, Dragoljub Novaković, Rastko Milošević, Sandra Dedijer
Publicado en: Journal of the National Science Foundation of Sri Lanka, Edición 46/3, 2018, Página(s) 381, ISSN 1391-4588
Editor: National Science Foundation of Sri Lanka
DOI: 10.4038/jnsfsr.v46i3.8489

Mechanical properties of edible biofilm as a substrate for printed electronics

Autores: Goran Stojanović, Milica Pojić, Sanja Kojić, Aleksandra Mišan, Dragana Vasiljević
Publicado en: Applied Physics A, Edición 125/8, 2019, Página(s) 576-583, 2019, ISSN 0947-8396
Editor: Springer Verlag
DOI: 10.1007/s00339-019-2881-5

Mathematical models for water vapour resistance prediction of printed garments

Autores: Mladen Stančić, Nemanja Kašiković, Dragana Grujić, Dragoljub Novaković, Rastko Milošević, Branka Ružičić, Jelka Geršak
Publicado en: Coloration Technology, Edición 134/1, 2018, Página(s) 82-88, ISSN 1472-3581
Editor: Society of Dyers and Colourists
DOI: 10.1111/cote.12328

Camera Characterization for Colorimetric Assessment of Goniochromatic Prints

Autores: Ivana Tomić, Sandra Dedijer, Pablo Martínez-Cañada, Dragoljub Novaković, Aleš Hladnik
Publicado en: Journal of Imaging Science and Technology, Edición 61/2, 2017, Página(s) 205021-2050215, ISSN 1062-3701
Editor: Society for Imaging Science and Technology
DOI: 10.2352/j.imagingsci.technol.2017.61.2.020502

Testing and Characterization of Different Papers as Substrate Material for Printed Electronics and Application in Humidity Sensor

Autores: ijana Koji?, Goran M. Stojanovi?, Aleksandar Mileti?, Milan Radovanovi?, Hani Al-Salami, Fabiana Arduini
Publicado en: Sensors and Materials, Edición 31/9, 2019, Página(s) 2981, ISSN 0914-4935
Editor: M Y U Scientific Publishing Division
DOI: 10.18494/sam.2019.2473

Performance Analysis of Flexible Ink-Jet Printed Humidity Sensors Based on Graphene Oxide

Autores: Dragana Z. Vasiljevic, Aida Mansouri, Luca Anzi, Roman Sordan, Goran M. Stojanovic
Publicado en: IEEE Sensors Journal, Edición 18/11, 2018, Página(s) 4378-4383, ISSN 1530-437X
Editor: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsen.2018.2823696

Inductive Displacement Sensor of Novel Design Printed on Polyimide Foil

Autores: Kalman Babkovic, Mirjana Damnjanovic, Laszlo Nagy, Milica Kisic, Goran Stojanovic
Publicado en: IEEE Transactions on Magnetics, Edición 53/4, 2017, Página(s) 1-5, ISSN 0018-9464
Editor: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tmag.2016.2636820

The influence of heat treatment on the quality of screen printed textile substrates

Autores: Nemanja Kašiković, Mladen Stančić, Gojko Vladić, Dragana Grujić, Dragoljub Novaković, Rastko Milošević, Ivan Pinćjer
Publicado en: Matéria (Rio de Janeiro), Edición 22/1, 2017, ISSN 1517-7076
Editor: Universidade Federal do Rio de Janeiro, Coordenacao dos Programas de Pos-Graduacao em Engenharia
DOI: 10.1590/s1517-707620170001.0123

A Textile-Based Microfluidic Platform for the Detection of Cytostatic Drug Concentration in Sweat Samples

Autores: Goran M. Stojanović, Maja M. Radetić, Zoran V. Šaponjić, Marija B. Radoičić, Milan R. Radovanović, Željko V. Popović, Saša N. Vukmirović
Publicado en: Applied Sciences, Edición 10/12, 2020, Página(s) 4392, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app10124392

Adaptive Medium Access Control Protocol for Dynamic Medical Traffic with Quality of Service Provisioning in Wireless Body Area Network

Autores: Wan Haszerila Wan Hassan, Sohail Sarang, Darmawaty Mohd Ali, Goran M. Stojanovic, Wan Nor Syafizan Wan Muhammad, Norsuzila Ya’acob
Publicado en: IEEE Access, Edición vol. 12, pp. 191461-191479, 2024, Página(s) 1-1, ISSN 2169-3536
Editor: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/access.2024.3515197

Embroidered 3D capacitive sensor integrated with bandage for monitoring of volume and type of biofluids

Autores: Saima Qureshi, Goran M. Stojanović, Mitar Simić, Sanja Kojić, Bojan Petrović, Ana Tomas Petrović, Muhammad Umar Aslam Khan
Publicado en: Sensing and Bio-Sensing Research, Edición vol. 43, February 2024, 100634, 2024, Página(s) 1-8, ISSN 2214-1804
Editor: Elsevier BV
DOI: 10.1016/j.sbsr.2024.100634

A Study of the Performance Degradation of Conductive Threads Based on the Effects of Tensile Forces and Repeated Washing

Autores: Adrian K. Stavrakis, Mitar Simić, Goran M. Stojanović
Publicado en: Polymers, Edición 20734360, 2022, Página(s) 1-16, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym14214581

A Novel Microfluidic Compact Disc to Investigate Electrochemical Property Changes Between Artificial and Real Salivary Samples Mixed with Mouthwashes Using Electrical Impedance Analysis

Autores: Aung Thiha, Fatimah Ibrahim, Karunan Joseph, Bojan Petrović, Sanja Kojić, Nuraina Anisa Dahlan, Nurul Fauzani Jamaluddin, Saima Qureshi, Goran M. Stojanović
Publicado en: PLoS ONE, Edición 18(2): e0280381, 2023, Página(s) 1-19, ISSN 1932-6203
Editor: Public Library of Science
DOI: 10.1371/journal.pone.0280381

Fabric based printed-distributed battery for wearable e-textiles: a review

Autores: Adnan E. Ali, Varun Jeoti, Goran M. Stojanović
Publicado en: Science and Technology of Advanced Materials, Edición 22/1, 2021, Página(s) 772-793, ISSN 1468-6996
Editor: National Institute for Materials Science and Elsevier BV Japan
DOI: 10.1080/14686996.2021.1962203

Paper card-like electrochemical platform as a smart point-of-care device for reagent-free glucose measurement in tears

Autores: Luca Fiore, Ankita Sinha, Narjiss Seddaoui, Jessica di Biasio, Federico Ricci, Goran M. Stojanovic, Fabiana Arduini
Publicado en: Chemical Communications, Edición vol. 59, no. 29, 2023, Página(s) 4300-4303, ISSN 1359-7345
Editor: Royal Society of Chemistry
DOI: 10.1039/d2cc06561d

A fully-printed electrochemical platform for assisted colorimetric detection of phosphate in saliva: Greenness and whiteness quantification by the AGREE and RGB tools

Autores: Vincenzo Mazzaracchio, Alessandro Sassolini, Kalyan Y. Mitra, Dana Mitra, Goran M. Stojanović, Andreas Willert, Enrico Sowade, Reinhard R. Baumann, Ralf Zichner, Danila Moscone, Fabiana Arduini
Publicado en: Green Analytical Chemistry, Edición 1, 100006, 2022, Página(s) 1-9, ISSN 2772-5774
Editor: Elsevier
DOI: 10.1016/j.greeac.2022.100006

Electrical Characterization of Conductive Threads for Textile Electronics

Autores: A.K. Stavrakis, M. Simić, G. Stojanović
Publicado en: Electronics, Edición 10, 2021, Página(s) 967-980, ISSN 2079-9292
Editor: MDPI
DOI: 10.3390/electronics10080967

Feasibility of conductive embroidered threads for I2C sensors in microcontroller-based wearable electronics

Autores: Gabriele Volpes, Simone Valenti, Hima Zafar, Riccardo Pernice, Goran M. Stojanovic
Publicado en: Flexible and Printed Electronics, Edición 8 (2023) 015016, 2023, Página(s) 1-9, ISSN 2058-8585
Editor: IOPScience
DOI: 10.1088/2058-8585/acbbdc

Impedance analysis of milk quality using functionalized polyamide textile-based sensor

Autores: Goran M. Stojanović, Ankita Sinha, Adnan E. Ali, Varun Jeoti, Marija B. Radoičić, Darka D. Marković, Maja M. Radetić
Publicado en: Computers and Electronics in Agriculture, Edición 191, 2021, Página(s) 106545, ISSN 0168-1699
Editor: Elsevier BV
DOI: 10.1016/j.compag.2021.106545

Conference proceedings (21)

Feasibility of conductive embroidered threads for I2C sensors in microcontroller-based wearable electronics

Autores: Zafar, H., Volpes, G., Valenti, S., Pernice, R., and Stojanović, G. M.
Publicado en: SINTEC FINAL WORKSHOP “SMART BIOELECTRONIC AND WEARABLE SYSTEMS”, Edición Uppsala, Sweden. April 26-29, 2023, 2023, Página(s) "Page #53"
Editor: Uppsala University

Measurement Methods, Instrumentation and Data Processing for Textile and Flexible Sensors

Autores: Mitar Simić, Milan Radovanović
Publicado en: 10th INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING, Edición MLI1.1, 2023, Página(s) 1-7, ISBN 978-86-7466-970-9
Editor: Society for ETRAN

Application Of SEM And Conventional Microscopy In The Analysis Of Dental Floss Wear And Break

Autores: Ksenija Stanojević, Jovana Kalamković, Lazar Milić, Adrian Stavrakis, Sanja Kojić, Nikola Plavac, Goran Stojanović
Publicado en: INTERNATIONAL Scientific Conference ETIKUM'2021, 2021, Página(s) 185–188, ISBN 978-86-6022-387-8
Editor: UNIVERSITY OF NOVI SAD, FACULTY OF TECHNICAL SCIENCES

Contact Angle Measurement on Textile Based Threads Sensors

Autores: Saima Qureshi, Sanja Kojic, Ankita Sinha, Milica Injac, Hima Zafar, Bojan Petrovic, Goran Stojanovic
Publicado en: Nuclear Technology, Radiation Safety and Advanced Technological Researches, Edición December 10-11, 2021, 2021, Página(s) 112-114
Editor: Istanbul Technical University

A Novel, Fluidically Reconfigurable Patch Antenna Utilizing Conductive Fabrics

Autores: Adrian K. Stavrakis, Melina Ioannidou, Goran M. Stojanović
Publicado en: 2024 International Conference on Smart Systems and Technologies (SST), Edición 16-18 October 2024, 2024, Página(s) 29-33
Editor: IEEE
DOI: 10.1109/sst61991.2024.10755504

Wearable Textile-based Chemiresistive pH Sensors with MXene Chitosan Composite

Autores: P. Kumar, G. M. Stojanović, M. Gupta, H. F. Hawari
Publicado en: NanoMedicine International Conference, Edición Barcelona, Spain, October 23-25, 2024, 2024, Página(s) 58
Editor: SMS 2024 / NANOMED 2024

A Low-Complexity Method for Processing EIS Data of R-RC Circuit and Parameter Identification

Autores: Mitar Simić
Publicado en: 2023 International Workshop on Impedance Spectroscopy (IWIS), Edición September 26-29, 2023, 2023, Página(s) 12-15, ISBN 979-8-3503-5895-7
Editor: IEEE
DOI: 10.1109/iwis61214.2023.10302796

Portable Device for In-Situ Cyclic Voltammetry Measurements

Autores: Mitar Simić
Publicado en: 2024 47th International Spring Seminar on Electronics Technology (ISSE), Edición 15-19 May 2024, 2024, Página(s) 1-5
Editor: IEEE
DOI: 10.1109/isse61612.2024.10604012

Fabrication and Characterization of Inkjet Printed Flexible Fractal type Temperature Sensor

Autores: Saima Qureshi, Lazar Milić, Varun Jeoti and Goran M. Stojanović
Publicado en: 4th International Conference for Innovation In Biomedical Engineering and Life Sciences (ICIBEL 2022), Edición December 10-13, 2022, 2022
Editor: University of Malaya ,Kuala Lumpur, Malaysia

A Polynomial Curve Fitting of Bioimpedance Data for Parameter Estimation of the Cole-Impedance Model

Autores: Mitar Simić, Todd J. Freeborn, Fernando Seoane, Olfa Kanoun
Publicado en: The 17th International Workshop on Impedance Spectroscopy (IWIS2024), Edición September 24-27 2024, 2024, Página(s) 1 - 6
Editor: Technische Universität Chemnitz

QoS and Burst Transmission Enabled MAC Protocol for Ambient IoT

Autores: Sohail Sarang, Goran M Stojanović, Micheal Drieberg, Varun Jeoti, Mikko Valkama
Publicado en: 2024 7th International Balkan Conference on Communications and Networking (BalkanCom), Edición June 3-6, 2024, 2024, Página(s) 285-289
Editor: IEEE
DOI: 10.1109/balkancom61808.2024.10557186

Flexible, Fully Textile-Based Force Sensors for Wearable Applications

Autores: Adrian K. Stavrakis, Mitar Simić, Goran M. Stojanović
Publicado en: 15th International Symposium on Flexible Organic Electronics (ISFOE’22), Edición 4-7 July 2022, 2022
Editor: Aristotle University of Thessaloniki

Graphene Coated Textile Dielectric Materials effect on Performance of Textile Triboelectric Nanogenerator

Autores: Anđela Lakić, Saima Qureshi, Mehwish Hanif, Goran M. Stojanović
Publicado en: The 2024 Spring Meeting of the European Materials Research Society (E-MRS), Edición 27-31 May 2024, 2024
Editor: European Materials Research Society (E-MRS)

Screen Printed Electrochemical Sensors: Textile Effect on pH Sensing

Autores: Saima Qureshi, Goran M. Stojanović
Publicado en: The 17th International Workshop on Impedance Spectroscopy (IWIS 2024), Edición September 24-27 2024, 2024, Página(s) 1-4
Editor: Technische Universität Chemnitz

A temperature compensated MOSFET-C band-pass filter in 0.35 um CMOS technology

Autores: Brkic Miodrag, Jelena Radic, Kristina Nikolic, Mirjana Damnjanovic
Publicado en: 2020 23rd International Symposium on Design and Diagnostics of Electronic Circuits & Systems (DDECS), 2020, Página(s) 1-5, ISBN 978-1-7281-9938-2
Editor: IEEE
DOI: 10.1109/ddecs50862.2020.9095661

A tunable bandwidth 6th-order active low-pass filter in 0.18 um CMOS technology

Autores: Kristina Nikolic, Jelena Radic
Publicado en: 2020 23rd International Symposium on Design and Diagnostics of Electronic Circuits & Systems (DDECS), 2020, Página(s) 1-2, ISBN 978-1-7281-9938-2
Editor: IEEE
DOI: 10.1109/ddecs50862.2020.9095683

A novel approach towards fabrication of textile antennas for wearable applications

Autores: Adrian K. Stavrakis, Goran M. Stojanović, Melina P. Ioannidou
Publicado en: 2024 23rd International Symposium INFOTEH-JAHORINA (INFOTEH), Edición 20 - 22 March, 2024, 2024, Página(s) 1-5
Editor: IEEE
DOI: 10.1109/infoteh60418.2024.10496002

Microcontroller-based Readout of Resistive Sensors

Autores: Mitar Simić
Publicado en: The 17th IFAC conference on Programmable Devices and Embedded Systems (PdeS2022), 2022
Editor: International Federation of Automatic Control

Advancement in textile based wearable sensor technology for accurate stress prediction

Autores: Hima Zafar, Goran Stojanović
Publicado en: HTWG Konstanz: Medical Summer School: Towards building sustainable and co-created telemedicine systems in Western Balkan Countries, Edición 4th -8th September, 2023, 2023
Editor: Polytechnic University of Tirana, Albania

HENO-MAC: Hybrid Energy Harvesting-based Energy Neutral Operation MAC Protocol for Delay-Sensitive IoT Applications

Autores: Sohail Sarang, Goran M Stojanović, Micheal Drieberg, Varun Jeoti, Mikko Valkama
Publicado en: 2024 IEEE Wireless Communications and Networking Conference (WCNC), Edición April 21-24, 2024, 2024, Página(s) 1-6
Editor: IEEE
DOI: 10.1109/wcnc57260.2024.10571258

Electro-mechanical testing of silver conductive textiles for strain sensing application

Autores: Saima Qureshi, Pradeep Kumar, Goran M. Stojanović
Publicado en: ETIKUM 2023 INTERNATIONAL SCIENTIFIC CONFERENCE, Edición Novi Sad, December 7-9, 2023, 2023, Página(s) 173-176
Editor: University of Novi Sad, Faculty of Technical Sciences