ERA Chair for emerging technologies and innovative research in Stretchable and Textile Electronics

Informations projet

STRENTEX

N° de convention de subvention: 854194

DOI

10.3030/854194

Projet clôturé

Date de signature de la CE 20 Juin 2019

Date de début 1 Janvier 2020

Date de fin 31 Decembre 2024

Financé au titre de

• Establishing ‚ERA Chairs’

Coût total

€ 2 475 500,00

Contribution de l’UE

€ 2 475 500,00

Coordonné par

UNIVERZITET U NOVOM SADU FAKULTET TEHNICKIH NAUKA
Serbia

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Open Research Data Pilot (1)

Data managment plan

This Deliverable will outline how research data will be handled during the project and after finalisation.

Websites, patent fillings, videos etc. (3)

Setting and updating the Project web site and social media 2

The STRENTEX web portal will be set up at the very beginning of the Project and will be regularly updated and this Deliverable will report on the visual project identity as well as project presence at social media such as Facebook Twitter Instagram LinkedIn

Setting and updating the Project web site and social media 3

The STRENTEX web portal will be set up at the very beginning of the Project and will be regularly updated and this Deliverable will report on the visual project identity as well as project presence at social media such as Facebook, Twitter, Instagram, LinkedIn.

Setting and updating the Project web site and social media 1

The STRENTEX web portal will be set up at the very beginning of the Project and will be regularly updated and this Deliverable will report on the visual project identity as well as project presence at social media such as Facebook, Twitter, Instagram, LinkedIn

Documents, reports (18)

Report1 on attended scientific conferences

ERA Chair holder and involved staff will present results of the research at conferences and symposium in the field and the list of conferences will be presented in this Deliverable.

Report2 from the technical fairs participation

The STRENTEX project will have a booth on at least 2 technical fairs in the field of large-area electronics or printed electronics (e.g. LOPE-C, Productronica) in order to present innovative demonstrators and prototypes and this Deliverable will report from these events.

Report2 on prepared and submitted new follow-up proposals

This Deliverable will describe shortly new project proposals which will be created and submitted for open calls with H2020 and Horizon Europe in order to provide sustainability of the ERA Chair team.

Report on established spin-off company in the field

This deliverable will explain formal procedure for establishment a new spin-off in the project field as well as all activities to reach this stage, such as organization of round-tables with stakeholders and industry representatives.

Report1 on prepared and submitted new follow-up proposals

This Deliverable will describe shortly new project proposals which will be created and submitted for open calls with H2020 and Horizon Europe in order to provide sustainability of the ERA Chair team

Report on organized training events

This Deliverable will reports from Summer School Workshop 1 and Seminar 1 which will be organized within the project lifespan

Report on organized Final conference

This Deliverable will report from the final international conference which will be organized in order to present the most important results of the project. ERA Chair members will be invited to prepare a summary of their achievements in the form of manuscripts and monograph will be published.

Selection report for ERA Chair team members

This Deliverable will describe the complete procedure of selection of members of ERA Chair team. The recruitment process will be in compliance with the ERA priorities, rewarding achievement and rejecting mediocrity. Team member full-time positions will be open for: 1 Established Researcher, 2 Recognized Researchers and 4 First Stage Researchers.

Report on procuring research equipment for ERA Chair

This Deliverable will describe the procedure for purchasing equipment which is deemed necessary to fulfil the Project objectives (minor part of the project budget). The sophisticated pieces of equipment (Screen Stencil Printer, Embroidery machine for e-textile and Instrument for stretch tests) will be purchased in order to enable high-tech research in the Project field. These pieces complement the existing equipment at the FTN, in the project domain.

Report2 on attended scientific conferences

ERA Chair holder and involved staff will present results of the research at conferences and symposium in the field and the list of conferences will be presented in this Deliverable

Report1 on establishment of CESTE

This Deliverable will cover the formal procedure for establishment of the Center for stretchable and textile electronics CESTE which will be led by the ERA Chair holder and their roles and results

ERA Chair holder appointment report

This Deliverable will be a report on the selection process of the ERA Chair holder, including the text of the vacancy notice, places of publication, composition of the selection panel, CVs of applicants, minutes of selection panel meeting(s) as well as any other document allowing for a full assessment of the openness of the selection procedure.

Report1 on outreach activities

This Deliverable will report from events such as Festival of sciences, Researchers' nights, open door days and info days, intended to engage general pubic in the project topic.

Report2 on establishment of CESTE

This Deliverable will cover the formal procedure for establishment of the Center for stretchable and textile electronics (CESTE) which will be led by the ERA Chair holder and their roles and results.

Report2 on outreach activities

This Deliverable will report from events such as Festival of sciences Researchers nights open door days and info days intended to engage general pubic in the project topic

Report3 on attended scientific conferences

ERA Chair holder and involved staff will present results of the research at conferences and symposium in the field and the list of conferences will be presented in this Deliverable.

Report1 from the technical fairs participation

The STRENTEX project will have a booth on at least 2 technical fairs in the field of largearea electronics or printed electronics eg LOPEC Productronica in order to present innovative demonstrators and prototypes and this Deliverable will report from these events

Report3 on outreach activities

This Deliverable will report from events such as Festival of sciences, Researchers' nights, open door days and info days, intended to engage general pubic in the project topic.

Publications

Peer reviewed articles (55)

Influence of stitch type division and geometry on the electrical properties of conductive embroidered structures

Auteurs: Hima Zafar, Milica Vučinić Vasić, Željko Popović, Kalman Babković, Goran M. Stojanović
Publié dans: Journal of Industrial Textiles, Numéro vol. 53, 2023, Page(s) pp. 1-20, ISSN 1528-0837
Éditeur: SAGE Publications
DOI: 10.1177/15280837231206556

Comprehensive Review on Wearable Sweat-Glucose Sensors for Continuous Glucose Monitoring

Auteurs: Hima Zafar, Asma Channa, Varun Jeoti, Goran M. Stojanović
Publié dans: Sensors, Numéro 22(2), 638, 2022, Page(s) 1-35, ISSN 1424-8220
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s22020638

Wearable Device for Personalized EMG Feedback-based Treatments

Auteurs: Mitar Simić, Goran M. Stojanović
Publié dans: Results in Engineering, Numéro vol. 23, 102472, 2024, Page(s) 1-14, ISSN 2590-1230
Éditeur: Elsevier BV
DOI: 10.1016/j.rineng.2024.102472

Portable Respiration Monitoring System with an Embroidered Capacitive Facemask Sensor

Auteurs: Mitar Simić, Adrian K. Stavrakis, Ankita Sinha, Velibor Premčevski, Branko Markoski, Goran M. Stojanović
Publié dans: Biosensors, Numéro 12(5), 339, 2022, Page(s) 1-23, ISSN 2079-6374
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/bios12050339

A novel method for in-situ extracting bio-impedance model parameters optimized for embedded hardware

Auteurs: Mitar Simić, Todd J. Freeborn, Tomislav B. Šekara, Adrian K. Stavrakis, Varun Jeoti, Goran M. Stojanović
Publié dans: Scientific Reports, Numéro 13 (1), 2023, Page(s) 1-12, ISSN 2045-2322
Éditeur: Nature Publishing Group
DOI: 10.1038/s41598-023-31860-w

Impact of Various Wearability Conditions on the Performances of Meander-Line Z-Shaped Embroidered Antenna

Auteurs: Adnan E. Ali, Goran M. Stojanović, Varun Jeoti, Dalibor Sekulić, Ankita Sinha
Publié dans: International Journal of Antennas and Propagation, Numéro 16875869, 2022, Page(s) 1-15, ISSN 1687-5869
Éditeur: Hindawi Publishing Corporation
DOI: 10.1155/2022/6741689

A fully textile-based, tunable, force and strain sensing resistor for e-textile applications

Auteurs: Adrian Stavrakis, Mitar Simić, Mirjana Damnjanović, Goran M Stojanović
Publié dans: Heliyon, Numéro 10 (2024) e26069, 2024, Page(s) 1-10, ISSN 2405-8440
Éditeur: Elsevier Ltd
DOI: 10.1016/j.heliyon.2024.e26069

Textile-based electrochemical sensors and their applications

Auteurs: Ankita Sinha; null Dhanjai; Adrian K. Stavrakis; Goran M. Stojanović
Publié dans: Talanta, Numéro 244, 2022, Page(s) 123425, ISSN 0039-9140
Éditeur: Elsevier BV
DOI: 10.1016/j.talanta.2022.123425

Parameter Estimation of 2R-1C Circuit using Embedded Hardware and Measured Impedance Modulu

Auteurs: Mitar Simić, Goran M. Stojanović
Publié dans: Journal of Circuits, Systems and Computers, Numéro vol. 23, no. 15, 2023, Page(s) 2450089 (13 pages), ISSN 0218-1266
Éditeur: World Scientific Publishing Co
DOI: 10.1142/s0218126624500890

A Portable Device for Passive LC Sensors Readout with Low-Coupling Enhanced Sensitivity

Auteurs: Mitar Simić, Adrian K. Stavrakis, Milan Radovanović, Asif Iqbal, Varun Jeoti, Goran M. Stojanović
Publié dans: IEEE Transactions on Instrumentation & Measurement, Numéro 2001012, 2022, Page(s) 1-8, ISSN 0018-9456
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tim.2022.3232089

Wireless Readout of Resistive Sensors

Auteurs: Mitar Simić, Milan Radovanović, Adrian K. Stavrakis, Varun Jeoti
Publié dans: IEEE Sensors Journal, Numéro Vol. 22, No. 5, 2022, Page(s) 4235-4245, ISSN 1530-437X
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsen.2022.3145875

Parameter extraction of the Cole-impedance model for in-situ monitoring of electrochemical sources

Auteurs: Mitar Simić, Varun Jeoti, Goran M. Stojanović
Publié dans: Journal of Energy Storage, Numéro 77 (2024) 109895, 2024, Page(s) pp. 1-13, ISSN 2352-152X
Éditeur: Elsevier
DOI: 10.1016/j.est.2023.109895

FEM Analysis of Various Multilayer Structures for CMOS Compatible Wearable Acousto-Optic Devices

Auteurs: Mehwish Hanif, Varun Jeoti, Mohamad Radzi Ahmad, Muhammad Zubair Aslam, Saima Qureshi, Goran Stojanovic
Publié dans: Sensors, Numéro 21(23), 7863, 2021, ISSN 1424-8220
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s21237863

A Low-Complexity Method for Parameter Estimation of the Simplified Randles Circuit with Experimental Verification

Auteurs: Mitar Simić, Adrian K. Stavrakis, Goran M. Stojanović
Publié dans: IEEE Sensors Journal, Numéro Vol. 21, No. 21, 2021, Page(s) 24209-24217, ISSN 1530-437X
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsen.2021.3110296

Cost-Effective Solution for Resonance-Based Capacitive Sensors Readout

Auteurs: Mitar Simić, Goran Stojanović
Publié dans: IEEE Transactions on Instrumentation and Measurement, Numéro 74, 2025, Page(s) 1-9, ISSN 0018-9456
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tim.2025.3527546

Performance Evaluation of Dental Flosses Pre- and Post-Utilization

Auteurs: Adrian K. Stavrakis, Sanja Kojić, Bojan Petrović, Isidora Nešković, Goran M. Stojanović
Publié dans: Materials, Numéro 15(4), 1522, 2022, Page(s) 1-14, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma15041522

Textile-based heating system for safe localized warts treatment

Auteurs: Mitar Simić, Adrian K. Stavrakis, Lazar Milić, Milica Vučinić-Vasić, Goran M. Stojanović
Publié dans: Journal of Science: Advanced Materials and Devices, Numéro 8 (2023) 100607, 2023, Page(s) pp. 1-12, ISSN 2468-2284
Éditeur: Elsevier B.V
DOI: 10.1016/j.jsamd.2023.100607

A Randles Circuit Parameter Estimation of Li-Ion Batteries With Embedded Hardware

Auteurs: Mitar Simić, Adrian K. Stavrakis, Varun Jeoti, Goran M. Stojanović
Publié dans: IEEE Transactions on Instrumentation and Measurement, Numéro 71, 1004312, 2022, Page(s) 1-12, ISSN 0018-9456
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tim.2022.3183661

Advancing Multiband OFDM Channel Sounding: An Iterative Time Domain Estimation for Spectrally Constrained Systems

Auteurs: Asif Iqbal, Micheal Drieberg, Varun Jeoti, Azrina Binti Abd Aziz, Goran M. Stojanović, Mitar Simić, Nazabat Hussain
Publié dans: IEEE Access, Numéro vol. 11, 2023, Page(s) pp. 103333-103349, ISSN 2169-3536
Éditeur: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/access.2023.3317431

Review of Fabrication of SAW Sensors on Flexible Substrates: Challenges and Future

Auteurs: Saima Qureshi, Mehwish Hanif, Varun Jeoti, Goran M. Stojanović, Muhammad T. Khan
Publié dans: Results in Engineering, Numéro 22 (2024), 2024, Page(s) 102323, ISSN 2590-1230
Éditeur: Elsevier BV
DOI: 10.1016/j.rineng.2024.102323

Sensing system based on knitted electrodes for fruit quality evaluation

Auteurs: Tijana Kojic, Mitar Simić, Milica Vučinić-Vasić, Goran M. Stojanović
Publié dans: Journal of Food Engineering, Numéro vol. 353, 111544, 2023, ISSN 0260-8774
Éditeur: Elsevier BV
DOI: 10.1016/j.jfoodeng.2023.111544

Silver Thread‐Based Microfluidic Platform for Detection of Essential Oils Using Impedance Spectroscopy

Auteurs: Tijana Kojić, Božica Kovačević, Ankita Sinha, Mitar Simić, Goran Stojanović
Publié dans: Applied Sciences, Numéro 2022, 12(7), 2022, Page(s) 3996-3607, ISSN 2076-3417
Éditeur: MDPI
DOI: 10.3390/app12073596

Parameter Estimation of the Randles Equivalent Electrical Circuit Using Only Real Part of the Impedance

Auteurs: Mitar Simić, Adrian K. Stavrakis, Tijana Kojić, Varun Jeoti, Goran M. Stojanović
Publié dans: IEEE Sensors Journal, Numéro vol. 23, no. 5, 2023, Page(s) 4922-4929, ISSN 1530-437X
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsen.2023.3238074

Polymer-Thread-Based Fully Textile Capacitive Sensor Embroidered on a Protective Face Mask for Humidity Detection

Auteurs: Ankita Sinha, Adrian K. Stavrakis, Mitar Simic, Goran M. Stojanovic
Publié dans: ACS Omega, Numéro 2022, 7, 2022, Page(s) 44928−44938, ISSN 2470-1343
Éditeur: ACS - American Chemical Society
DOI: 10.1021/acsomega.2c05162

Portable Heating and Temperature Monitoring System with a Textile Heater Embroidered on the Facemask

Auteurs: Mitar Simić, Adrian K. Stavrakis and Goran M. Stojanović
Publié dans: ACS Omega, Numéro 7, 50, 2022, Page(s) 47214–47224, ISSN 2470-1343
Éditeur: American Chemical Society
DOI: 10.1021/acsomega.2c06431

Silver Conductive Threads-Based Embroidered Electrodes on Textiles as Moisture Sensors for Fluid Detection in Biomedical Applications

Auteurs: Qureshi, Saima, Goran M. Stojanović, Mitar Simić, Varun Jeoti, Najeebullah Lashari, and Farooq Sher
Publié dans: Materials, Numéro 14(24), 7813, 2021, Page(s) 1-21, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma14247813

Wearable humidity sensor embroidered on a commercial face mask and its electrical properties

Auteurs: Ankita Sinha, Adrian K. Stavrakis, Mitar Simić, Goran M. Stojanović
Publié dans: Journal of Materials Science, Numéro 58, 2023, Page(s) 1680–1693, ISSN 0022-2461
Éditeur: Kluwer Academic Publishers
DOI: 10.1007/s10853-022-08135-2

Flexible polyamide-based dental floss sensor for pH monitoring

Auteurs: Ankita Sinha, Adrian K. Stavrakis, Saima Qureshi, Goran M. Stojanović
Publié dans: Materials Letters, Numéro 326 (2022) 132971, 2022, Page(s) 1-4, ISSN 0167-577X
Éditeur: Elsevier BV
DOI: 10.1016/j.matlet.2022.132971

Gold Leaf-Based Microfluidic Platform for Detection of Essential Oils Using Impedance Spectroscopy

Auteurs: Ankita Sinha, Adrian K. Stavrakis, Mitar Simić, Sanja Kojić, Goran M. Stojanović
Publié dans: Biosensors, Numéro 12(12), 1169, 2022, Page(s) 1-12, ISSN 2079-6374
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/bios12121169

A Flexible Multiband Multicarrier Signal Design for Broadband Channel Sounding Applications

Auteurs: Asif Iqbal, Micheal Drieberg, Varun Jeoti, Azrina Binti Abd Aziz, Goran M. Stojanović, Mitar Simić, Nazabat Hussain
Publié dans: Human-centric Computing and Information Sciences, Numéro vol. 12, no. 19, 2022, Page(s) 1-17, ISSN 2192-1962
Éditeur: Springer Science + Business Media
DOI: 10.22967/hcis.2022.12.019

Parameter Estimation of the Single-Dispersion Fractional Cole-Impedance Model With the Embedded Hardware

Auteurs: Mitar Simić, Todd J. Freeborn, Mladen Veletić, Fernando Seoane, Goran M. Stojanović
Publié dans: IEEE Sensors journal, Numéro vol. 23, no. 12, 2023, Page(s) 12978-12987, ISSN 1530-437X
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsen.2023.3269952

Investigation of electrical performances of textile conductive lines under different connector configurations and external influences

Auteurs: Lazar Milić, Dejan Movrin, Mitar Simić, Varun Jeoti, Goran Stojanović
Publié dans: Textile Research Journal, Numéro 0(0), 2022, Page(s) 1-14, ISSN 0040-5175
Éditeur: SAGE Publications
DOI: 10.1177/00405175221145553

Textile-based wearable device for detection of date rape drugs in drinks

Auteurs: Goran M Stojanović, Lazar Milić, Ali A Endro, Mitar Simić, Ines Nikolić, Miroslav Savić, Snežana Savić
Publié dans: Textile Research Journal, Numéro 2023, 2023, Page(s) 1-14, ISSN 0040-5175
Éditeur: SAGE Publications
DOI: 10.1177/00405175231218740

Comparison of Performances of Flexible Tailor-Made Force Sensing Resistors Fabricated Using Inkjet and Xurographic Techniques

Auteurs: Goran Stojanović, Milan Radovanović, Dragana Vasiljević, Tijana Kojić, Bojana Pivaš, Tatjana Puškar, Sunil Kapadia, Reinhard Baumann
Publié dans: Journal of Sensors, Numéro 2019, 2019, Page(s) 1-8, ISSN 1687-725X
Éditeur: Hindawi Publishing Corporation
DOI: 10.1155/2019/9181492

Artificial neural networks for optimising camera-based colour measurements of prints enhanced with pearlescent pigments

Auteurs: Ivana Tomić, Sandra Dedijer, Dragoljub Novaković, Ivana Jurič
Publié dans: Coloration Technology, Numéro 134/5, 2018, Page(s) 364-372, ISSN 1472-3581
Éditeur: Society of Dyers and Colourists
DOI: 10.1111/cote.12346

Flexible sensors based on two conductive electrodes and MWCNTs coating for efficient pH value measurement

Auteurs: Goran Stojanović, Tijana Kojić, Milan Radovanović, Dragana Vasiljević, Sanja Panić, Vladimir Srdić, Jelena Cvejić
Publié dans: Journal of Alloys and Compounds, Numéro 794, 2019, Page(s) 76-83, ISSN 0925-8388
Éditeur: Elsevier BV
DOI: 10.1016/j.jallcom.2019.04.243

Colour fastness to washing of multi-layered digital prints on textile materials

Auteurs: Nemanja Kašiković, Gojko Vladić, Neda Milić, Dragoljub Novaković, Rastko Milošević, Sandra Dedijer
Publié dans: Journal of the National Science Foundation of Sri Lanka, Numéro 46/3, 2018, Page(s) 381, ISSN 1391-4588
Éditeur: National Science Foundation of Sri Lanka
DOI: 10.4038/jnsfsr.v46i3.8489

Mechanical properties of edible biofilm as a substrate for printed electronics

Auteurs: Goran Stojanović, Milica Pojić, Sanja Kojić, Aleksandra Mišan, Dragana Vasiljević
Publié dans: Applied Physics A, Numéro 125/8, 2019, Page(s) 576-583, 2019, ISSN 0947-8396
Éditeur: Springer Verlag
DOI: 10.1007/s00339-019-2881-5

Mathematical models for water vapour resistance prediction of printed garments

Auteurs: Mladen Stančić, Nemanja Kašiković, Dragana Grujić, Dragoljub Novaković, Rastko Milošević, Branka Ružičić, Jelka Geršak
Publié dans: Coloration Technology, Numéro 134/1, 2018, Page(s) 82-88, ISSN 1472-3581
Éditeur: Society of Dyers and Colourists
DOI: 10.1111/cote.12328

Camera Characterization for Colorimetric Assessment of Goniochromatic Prints

Auteurs: Ivana Tomić, Sandra Dedijer, Pablo Martínez-Cañada, Dragoljub Novaković, Aleš Hladnik
Publié dans: Journal of Imaging Science and Technology, Numéro 61/2, 2017, Page(s) 205021-2050215, ISSN 1062-3701
Éditeur: Society for Imaging Science and Technology
DOI: 10.2352/j.imagingsci.technol.2017.61.2.020502

Testing and Characterization of Different Papers as Substrate Material for Printed Electronics and Application in Humidity Sensor

Auteurs: ijana Koji?, Goran M. Stojanovi?, Aleksandar Mileti?, Milan Radovanovi?, Hani Al-Salami, Fabiana Arduini
Publié dans: Sensors and Materials, Numéro 31/9, 2019, Page(s) 2981, ISSN 0914-4935
Éditeur: M Y U Scientific Publishing Division
DOI: 10.18494/sam.2019.2473

Performance Analysis of Flexible Ink-Jet Printed Humidity Sensors Based on Graphene Oxide

Auteurs: Dragana Z. Vasiljevic, Aida Mansouri, Luca Anzi, Roman Sordan, Goran M. Stojanovic
Publié dans: IEEE Sensors Journal, Numéro 18/11, 2018, Page(s) 4378-4383, ISSN 1530-437X
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsen.2018.2823696

Inductive Displacement Sensor of Novel Design Printed on Polyimide Foil

Auteurs: Kalman Babkovic, Mirjana Damnjanovic, Laszlo Nagy, Milica Kisic, Goran Stojanovic
Publié dans: IEEE Transactions on Magnetics, Numéro 53/4, 2017, Page(s) 1-5, ISSN 0018-9464
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tmag.2016.2636820

The influence of heat treatment on the quality of screen printed textile substrates

Auteurs: Nemanja Kašiković, Mladen Stančić, Gojko Vladić, Dragana Grujić, Dragoljub Novaković, Rastko Milošević, Ivan Pinćjer
Publié dans: Matéria (Rio de Janeiro), Numéro 22/1, 2017, ISSN 1517-7076
Éditeur: Universidade Federal do Rio de Janeiro, Coordenacao dos Programas de Pos-Graduacao em Engenharia
DOI: 10.1590/s1517-707620170001.0123

A Textile-Based Microfluidic Platform for the Detection of Cytostatic Drug Concentration in Sweat Samples

Auteurs: Goran M. Stojanović, Maja M. Radetić, Zoran V. Šaponjić, Marija B. Radoičić, Milan R. Radovanović, Željko V. Popović, Saša N. Vukmirović
Publié dans: Applied Sciences, Numéro 10/12, 2020, Page(s) 4392, ISSN 2076-3417
Éditeur: MDPI
DOI: 10.3390/app10124392

Adaptive Medium Access Control Protocol for Dynamic Medical Traffic with Quality of Service Provisioning in Wireless Body Area Network

Auteurs: Wan Haszerila Wan Hassan, Sohail Sarang, Darmawaty Mohd Ali, Goran M. Stojanovic, Wan Nor Syafizan Wan Muhammad, Norsuzila Ya’acob
Publié dans: IEEE Access, Numéro vol. 12, pp. 191461-191479, 2024, Page(s) 1-1, ISSN 2169-3536
Éditeur: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/access.2024.3515197

Embroidered 3D capacitive sensor integrated with bandage for monitoring of volume and type of biofluids

Auteurs: Saima Qureshi, Goran M. Stojanović, Mitar Simić, Sanja Kojić, Bojan Petrović, Ana Tomas Petrović, Muhammad Umar Aslam Khan
Publié dans: Sensing and Bio-Sensing Research, Numéro vol. 43, February 2024, 100634, 2024, Page(s) 1-8, ISSN 2214-1804
Éditeur: Elsevier BV
DOI: 10.1016/j.sbsr.2024.100634

A Study of the Performance Degradation of Conductive Threads Based on the Effects of Tensile Forces and Repeated Washing

Auteurs: Adrian K. Stavrakis, Mitar Simić, Goran M. Stojanović
Publié dans: Polymers, Numéro 20734360, 2022, Page(s) 1-16, ISSN 2073-4360
Éditeur: MDPI
DOI: 10.3390/polym14214581

A Novel Microfluidic Compact Disc to Investigate Electrochemical Property Changes Between Artificial and Real Salivary Samples Mixed with Mouthwashes Using Electrical Impedance Analysis

Auteurs: Aung Thiha, Fatimah Ibrahim, Karunan Joseph, Bojan Petrović, Sanja Kojić, Nuraina Anisa Dahlan, Nurul Fauzani Jamaluddin, Saima Qureshi, Goran M. Stojanović
Publié dans: PLoS ONE, Numéro 18(2): e0280381, 2023, Page(s) 1-19, ISSN 1932-6203
Éditeur: Public Library of Science
DOI: 10.1371/journal.pone.0280381

Fabric based printed-distributed battery for wearable e-textiles: a review

Auteurs: Adnan E. Ali, Varun Jeoti, Goran M. Stojanović
Publié dans: Science and Technology of Advanced Materials, Numéro 22/1, 2021, Page(s) 772-793, ISSN 1468-6996
Éditeur: National Institute for Materials Science and Elsevier BV Japan
DOI: 10.1080/14686996.2021.1962203

Paper card-like electrochemical platform as a smart point-of-care device for reagent-free glucose measurement in tears

Auteurs: Luca Fiore, Ankita Sinha, Narjiss Seddaoui, Jessica di Biasio, Federico Ricci, Goran M. Stojanovic, Fabiana Arduini
Publié dans: Chemical Communications, Numéro vol. 59, no. 29, 2023, Page(s) 4300-4303, ISSN 1359-7345
Éditeur: Royal Society of Chemistry
DOI: 10.1039/d2cc06561d

A fully-printed electrochemical platform for assisted colorimetric detection of phosphate in saliva: Greenness and whiteness quantification by the AGREE and RGB tools

Auteurs: Vincenzo Mazzaracchio, Alessandro Sassolini, Kalyan Y. Mitra, Dana Mitra, Goran M. Stojanović, Andreas Willert, Enrico Sowade, Reinhard R. Baumann, Ralf Zichner, Danila Moscone, Fabiana Arduini
Publié dans: Green Analytical Chemistry, Numéro 1, 100006, 2022, Page(s) 1-9, ISSN 2772-5774
Éditeur: Elsevier
DOI: 10.1016/j.greeac.2022.100006

Electrical Characterization of Conductive Threads for Textile Electronics

Auteurs: A.K. Stavrakis, M. Simić, G. Stojanović
Publié dans: Electronics, Numéro 10, 2021, Page(s) 967-980, ISSN 2079-9292
Éditeur: MDPI
DOI: 10.3390/electronics10080967

Feasibility of conductive embroidered threads for I2C sensors in microcontroller-based wearable electronics

Auteurs: Gabriele Volpes, Simone Valenti, Hima Zafar, Riccardo Pernice, Goran M. Stojanovic
Publié dans: Flexible and Printed Electronics, Numéro 8 (2023) 015016, 2023, Page(s) 1-9, ISSN 2058-8585
Éditeur: IOPScience
DOI: 10.1088/2058-8585/acbbdc

Impedance analysis of milk quality using functionalized polyamide textile-based sensor

Auteurs: Goran M. Stojanović, Ankita Sinha, Adnan E. Ali, Varun Jeoti, Marija B. Radoičić, Darka D. Marković, Maja M. Radetić
Publié dans: Computers and Electronics in Agriculture, Numéro 191, 2021, Page(s) 106545, ISSN 0168-1699
Éditeur: Elsevier BV
DOI: 10.1016/j.compag.2021.106545

Conference proceedings (21)

Feasibility of conductive embroidered threads for I2C sensors in microcontroller-based wearable electronics

Auteurs: Zafar, H., Volpes, G., Valenti, S., Pernice, R., and Stojanović, G. M.
Publié dans: SINTEC FINAL WORKSHOP “SMART BIOELECTRONIC AND WEARABLE SYSTEMS”, Numéro Uppsala, Sweden. April 26-29, 2023, 2023, Page(s) "Page #53"
Éditeur: Uppsala University

Measurement Methods, Instrumentation and Data Processing for Textile and Flexible Sensors

Auteurs: Mitar Simić, Milan Radovanović
Publié dans: 10th INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING, Numéro MLI1.1, 2023, Page(s) 1-7, ISBN 978-86-7466-970-9
Éditeur: Society for ETRAN

Application Of SEM And Conventional Microscopy In The Analysis Of Dental Floss Wear And Break

Auteurs: Ksenija Stanojević, Jovana Kalamković, Lazar Milić, Adrian Stavrakis, Sanja Kojić, Nikola Plavac, Goran Stojanović
Publié dans: INTERNATIONAL Scientific Conference ETIKUM'2021, 2021, Page(s) 185–188, ISBN 978-86-6022-387-8
Éditeur: UNIVERSITY OF NOVI SAD, FACULTY OF TECHNICAL SCIENCES

Contact Angle Measurement on Textile Based Threads Sensors

Auteurs: Saima Qureshi, Sanja Kojic, Ankita Sinha, Milica Injac, Hima Zafar, Bojan Petrovic, Goran Stojanovic
Publié dans: Nuclear Technology, Radiation Safety and Advanced Technological Researches, Numéro December 10-11, 2021, 2021, Page(s) 112-114
Éditeur: Istanbul Technical University

A Novel, Fluidically Reconfigurable Patch Antenna Utilizing Conductive Fabrics

Auteurs: Adrian K. Stavrakis, Melina Ioannidou, Goran M. Stojanović
Publié dans: 2024 International Conference on Smart Systems and Technologies (SST), Numéro 16-18 October 2024, 2024, Page(s) 29-33
Éditeur: IEEE
DOI: 10.1109/sst61991.2024.10755504

Wearable Textile-based Chemiresistive pH Sensors with MXene Chitosan Composite

Auteurs: P. Kumar, G. M. Stojanović, M. Gupta, H. F. Hawari
Publié dans: NanoMedicine International Conference, Numéro Barcelona, Spain, October 23-25, 2024, 2024, Page(s) 58
Éditeur: SMS 2024 / NANOMED 2024

A Low-Complexity Method for Processing EIS Data of R-RC Circuit and Parameter Identification

Auteurs: Mitar Simić
Publié dans: 2023 International Workshop on Impedance Spectroscopy (IWIS), Numéro September 26-29, 2023, 2023, Page(s) 12-15, ISBN 979-8-3503-5895-7
Éditeur: IEEE
DOI: 10.1109/iwis61214.2023.10302796

Portable Device for In-Situ Cyclic Voltammetry Measurements

Auteurs: Mitar Simić
Publié dans: 2024 47th International Spring Seminar on Electronics Technology (ISSE), Numéro 15-19 May 2024, 2024, Page(s) 1-5
Éditeur: IEEE
DOI: 10.1109/isse61612.2024.10604012

Fabrication and Characterization of Inkjet Printed Flexible Fractal type Temperature Sensor

Auteurs: Saima Qureshi, Lazar Milić, Varun Jeoti and Goran M. Stojanović
Publié dans: 4th International Conference for Innovation In Biomedical Engineering and Life Sciences (ICIBEL 2022), Numéro December 10-13, 2022, 2022
Éditeur: University of Malaya ,Kuala Lumpur, Malaysia

A Polynomial Curve Fitting of Bioimpedance Data for Parameter Estimation of the Cole-Impedance Model

Auteurs: Mitar Simić, Todd J. Freeborn, Fernando Seoane, Olfa Kanoun
Publié dans: The 17th International Workshop on Impedance Spectroscopy (IWIS2024), Numéro September 24-27 2024, 2024, Page(s) 1 - 6
Éditeur: Technische Universität Chemnitz

QoS and Burst Transmission Enabled MAC Protocol for Ambient IoT

Auteurs: Sohail Sarang, Goran M Stojanović, Micheal Drieberg, Varun Jeoti, Mikko Valkama
Publié dans: 2024 7th International Balkan Conference on Communications and Networking (BalkanCom), Numéro June 3-6, 2024, 2024, Page(s) 285-289
Éditeur: IEEE
DOI: 10.1109/balkancom61808.2024.10557186

Flexible, Fully Textile-Based Force Sensors for Wearable Applications

Auteurs: Adrian K. Stavrakis, Mitar Simić, Goran M. Stojanović
Publié dans: 15th International Symposium on Flexible Organic Electronics (ISFOE’22), Numéro 4-7 July 2022, 2022
Éditeur: Aristotle University of Thessaloniki

Graphene Coated Textile Dielectric Materials effect on Performance of Textile Triboelectric Nanogenerator

Auteurs: Anđela Lakić, Saima Qureshi, Mehwish Hanif, Goran M. Stojanović
Publié dans: The 2024 Spring Meeting of the European Materials Research Society (E-MRS), Numéro 27-31 May 2024, 2024
Éditeur: European Materials Research Society (E-MRS)

Screen Printed Electrochemical Sensors: Textile Effect on pH Sensing

Auteurs: Saima Qureshi, Goran M. Stojanović
Publié dans: The 17th International Workshop on Impedance Spectroscopy (IWIS 2024), Numéro September 24-27 2024, 2024, Page(s) 1-4
Éditeur: Technische Universität Chemnitz

A temperature compensated MOSFET-C band-pass filter in 0.35 um CMOS technology

Auteurs: Brkic Miodrag, Jelena Radic, Kristina Nikolic, Mirjana Damnjanovic
Publié dans: 2020 23rd International Symposium on Design and Diagnostics of Electronic Circuits & Systems (DDECS), 2020, Page(s) 1-5, ISBN 978-1-7281-9938-2
Éditeur: IEEE
DOI: 10.1109/ddecs50862.2020.9095661

A tunable bandwidth 6th-order active low-pass filter in 0.18 um CMOS technology

Auteurs: Kristina Nikolic, Jelena Radic
Publié dans: 2020 23rd International Symposium on Design and Diagnostics of Electronic Circuits & Systems (DDECS), 2020, Page(s) 1-2, ISBN 978-1-7281-9938-2
Éditeur: IEEE
DOI: 10.1109/ddecs50862.2020.9095683

A novel approach towards fabrication of textile antennas for wearable applications

Auteurs: Adrian K. Stavrakis, Goran M. Stojanović, Melina P. Ioannidou
Publié dans: 2024 23rd International Symposium INFOTEH-JAHORINA (INFOTEH), Numéro 20 - 22 March, 2024, 2024, Page(s) 1-5
Éditeur: IEEE
DOI: 10.1109/infoteh60418.2024.10496002

Microcontroller-based Readout of Resistive Sensors

Auteurs: Mitar Simić
Publié dans: The 17th IFAC conference on Programmable Devices and Embedded Systems (PdeS2022), 2022
Éditeur: International Federation of Automatic Control

Advancement in textile based wearable sensor technology for accurate stress prediction

Auteurs: Hima Zafar, Goran Stojanović
Publié dans: HTWG Konstanz: Medical Summer School: Towards building sustainable and co-created telemedicine systems in Western Balkan Countries, Numéro 4th -8th September, 2023, 2023
Éditeur: Polytechnic University of Tirana, Albania

HENO-MAC: Hybrid Energy Harvesting-based Energy Neutral Operation MAC Protocol for Delay-Sensitive IoT Applications

Auteurs: Sohail Sarang, Goran M Stojanović, Micheal Drieberg, Varun Jeoti, Mikko Valkama
Publié dans: 2024 IEEE Wireless Communications and Networking Conference (WCNC), Numéro April 21-24, 2024, 2024, Page(s) 1-6
Éditeur: IEEE
DOI: 10.1109/wcnc57260.2024.10571258

Electro-mechanical testing of silver conductive textiles for strain sensing application

Auteurs: Saima Qureshi, Pradeep Kumar, Goran M. Stojanović
Publié dans: ETIKUM 2023 INTERNATIONAL SCIENTIFIC CONFERENCE, Numéro Novi Sad, December 7-9, 2023, 2023, Page(s) 173-176
Éditeur: University of Novi Sad, Faculty of Technical Sciences