Skip to main content
European Commission logo print header

Eastern European twinning on Structural Integrity and Reliability of Advanced Materials obtained through additive Manufacturing

Deliverables

Website development

Website M3 The activities will be continuously updated with checkpoints every 6 months

E-newsletter

One newsletter will be published at M6 and then every six months to inform interested stakeholders of project main results innovation and benefits M6

1st WP2 workshops' book of abstract and PPT presentation

The workshops book of abstracts will be made available in electronic format A PPT presentations of the workshop will be delivered M24

1st WP1 workshops’ book of abstract and PPT presentation

The 1st workshops book of abstracts will be made available in electronic format A PPT presentation of the workshop will be also delivered M12

Video making for You Tube channel

Project videos for You Tube channel to be produced within the end of the project M36

2nd WP1 workshops' book of abstract and PPT presentation

The 2nd workshops book of abstracts and a PPT presentation M28

PEDR

PEDR M6 The first version of the PEDR will be produced as a specific deliverable at the beginning of the project The PEDR will contain information on communication activities eg visual identity press release public engagement activities summaries of annual workshops and networking events together with the dissemination ie scientific papers poster and oral communication in conference and congresses etc and exploitation measures implemented during the project The PEDR will be updated in the interim and final report for EU

Publications

The effect of time on mechanical properties of biocompatible photopolymer resins used for fabrication of clear dental aligners

Author(s): Aleksa Milovanović, Aleksandar Sedmak, Zorana Golubović, Ksenija Zelić Mihajlović, Aleksandar Žurkić, Isaak Trajković, Miloš Milošević
Published in: Journal of the Mechanical Behavior of Biomedical Materials, Issue 119, 2021, Page(s) 104494, ISSN 1751-6161
Publisher: Elsevier BV
DOI: 10.1016/j.jmbbm.2021.104494

Mode I Fracture Toughness of Polyamide and Alumide Samples obtained by Selective Laser Sintering Additive Process

Author(s): Dan Ioan Stoia, Liviu Marsavina, Emanoil Linul
Published in: Polymers, Issue 12/3, 2020, Page(s) 640, ISSN 2073-4360
Publisher: MDPI Open Access Publishing
DOI: 10.3390/polym12030640

Laser-based additively manufactured polymers: a review on processes and mechanical models

Author(s): Roberto Brighenti, Mattia Pancrazio Cosma, Liviu Marsavina, Andrea Spagnoli, Michele Terzano
Published in: Journal of Materials Science, Issue 56/2, 2021, Page(s) 961-998, ISSN 0022-2461
Publisher: Kluwer Academic Publishers
DOI: 10.1007/s10853-020-05254-6

Novel method for measurement of pipeline materials fracture resistance-examination on selective laser sintered cylindrical specimens

Author(s): Trajkovic, I., Milosevic, M., Travica, M., Rakin, M., Mladenovic, G., Kudrjavceva, L., Medo, B.
Published in: Science of Sintering, Issue 54 (3), 2022, Page(s) 373-386, ISSN 0350-820X
Publisher: Plenum Publishers
DOI: 10.2298/sos2203373t

The effect of time on mechanical properties of biocompatible photopolymer resins used for fabrication of clear dental aligners

Author(s): Milovanović, A., Sedmak, A., Golubović, Z., Mihajlović, K. Z., Zurkić, A., Trajković, I., & Milosević, M.
Published in: Journal of the Mechanical Behavior of Biomedical Materials, Issue 119, 104494, 2021, ISSN 1751-6161
Publisher: Elsevier BV
DOI: 10.1016/j.jmbbm.2021.104494

Mechanical characterization of additively manufactured photopolymerized polymers

Author(s): Brighenti R., Marsavina L., Marghitas M.P., Cosma M.P., Montanari M.
Published in: Mechanics of Advanced Materials and Structures, Issue 30 (9), 2023, ISSN 1537-6494
Publisher: Taylor & Francis
DOI: 10.1080/15376494.2022.2045655

Smart Polymers for Advanced Applications: A Mechanical Perspective Review

Author(s): Roberto Brighenti; Ying Li; Franck J. Vernerey
Published in: Frontiers in Materials, Issue 7(196), 2020, Page(s) 1-18, ISSN 2296-8016
Publisher: Frontiers Media SA
DOI: 10.3389/fmats.2020.00196

Multiphysics modelling of the mechanical properties in polymers obtained via photo-induced polymerization

Author(s): Roberto Brighenti, Mattia Pancrazio Cosma, Liviu Marsavina, Andrea Spagnoli & Michele Terzano
Published in: The International Journal of Advanced Manufacturing Technology, Issue 117, 2021, Page(s) 481–499, ISSN 0268-3768
Publisher: Springer Verlag
DOI: 10.1007/s00170-021-07273-2

Mechanics and physics of the light-driven response of hydrogels

Author(s): R. Brighenti, M.P. Cosma, N. Cohen
Published in: Mechanics Research Communications, Issue 129, 2023, Page(s) 104077, ISSN 0093-6413
Publisher: Pergamon Press
DOI: 10.1016/j.mechrescom.2023.104077

Mode I critical energy release rate of additively manufactured polyamide samples

Author(s): Dan Ioan Stoia, Liviu Marsavina, Emanoil Linul
Published in: Theoretical and Applied Fracture Mechanics, Issue 114, 2021, Page(s) 102968, ISSN 0167-8442
Publisher: Elsevier BV
DOI: 10.1016/j.tafmec.2021.102968

Influence of anisotropy on the cold bending of S600MC sheet metal

Author(s): Ailinei, I. I., Galatanu, S. V., & Marsavina, L.
Published in: Engineering Failure Analysis, Issue 137; 106206, 2022, ISSN 1873-1961
Publisher: Elsevier
DOI: 10.1016/j.engfailanal.2022.106206

Mode I and II fracture toughness investigation of Laser-Sintered Polyamide

Author(s): Emanoil Linul, Liviu Marsavina, Dan Ioan Stoia
Published in: Theoretical and Applied Fracture Mechanics, Issue 106, 2020, Page(s) 102497, ISSN 0167-8442
Publisher: Elsevier BV
DOI: 10.1016/j.tafmec.2020.102497

Charpy impact properties and numerical modeling of polycarbonate composites

Author(s): Krausz, T., Ailinei, I. I., Galatanu, S. V., Marsavina, L.
Published in: Material Design and Processing Communications,, Issue 3(4), 2021, Page(s) e260, ISSN 2577-6576
Publisher: John Wiley & Sons Ltd
DOI: 10.1002/mdp2.260

Effect of the manufacturing parameters on the tensile and fracture properties of FDM 3D-printed PLA specimens

Author(s): L. Marșavina, C. Vălean, M. Mărghitaș, E. Linul, S. M. J. Razavi, F. Berto, R. Brighenti
Published in: Engineering Fracture Mechanics, Issue 274, 2022, Page(s) 108766, ISSN 0013-7944
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.engfracmech.2022.108766

Photopolymerized additive manufacturing materials: Modeling of the printing process, mechanical behavior, and sensitivity analysis

Author(s): Mattia Pancrazio Cosma, Roberto Brighenti
Published in: Material Design & Processing Communications, Issue 225, 2021, Page(s) 1-9, ISSN 2577-6576
Publisher: Wiley & Sins
DOI: 10.1002/mdp2.225

Comparative analysis of printing parameters effect on mechanical properties of natural PLA and advanced PLA-X material

Author(s): Aleksa Milovanović, Aleksandar Sedmak, Aleksandar Grbović, Zorana Golubović, Goran Mladenović, Katarina Čolić, Miloš Milošević
Published in: Procedia Structural Integrity, Issue 28, 2020, Page(s) 1963-1968, ISSN 2452-3216
Publisher: Elsevier BV
DOI: 10.1016/j.prostr.2020.11.019

Smart actuation of liquid crystal elastomer elements: cross-link density-controlled response

Author(s): Brighenti R. , Cosma M.P.
Published in: Smart Materials and Structures, Issue 31(1), 015012, 2022, ISSN 1361-665X
Publisher: IOPscience
DOI: 10.1088/1361-665x/ac34bf

Influence of the Printing Angle and Load Direction on Flexure Strength in 3D Printed Materials for Provisional Dental Restorations

Author(s): Paula Derban, Romeo Negrea, Mihai Rominu, Liviu Marsavina
Published in: Materials, Issue 14/12, 2021, Page(s) 3376, ISSN 1996-1944
Publisher: MDPI Open Access Publishing
DOI: 10.3390/ma14123376

Optimisation of the Heterogeneous Joining Process of AlMg3 and X2CrNiMo17-12-2 Alloy by FSW Method

Author(s): A. Feier, I. Both, E. Petzek.
Published in: Materials, Issue 16(7), 2023, Page(s) 2750, ISSN 1996-1944
Publisher: MDPI Open Access Publishing
DOI: 10.3390/ma16072750

Cyclic behaviour and microstructural evolution of metastable austenitic stainless steel 304 L produced by laser powder bed fusion

Author(s): Smid, M., Koutny, D., Neumannova, K., Chlup, Z., Nahlik, L., & Jambor, M.
Published in: Additive Manufacturing, Issue 68, 2023, Page(s) 103503, ISSN 2214-8604
Publisher: Elsevier BV
DOI: 10.1016/j.addma.2023.103503

Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication

Author(s): Benedetti, M., Du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, S.M.J., & Berto, F.
Published in: Materials Science and Engineering: R: Reports, Issue 144, 100606, 2021, ISSN 0927-796X
Publisher: Elsevier BV
DOI: 10.1016/j.mser.2021.100606

Puncturing of soft tissues: experimental and fracture mechanics-based study

Author(s): A. Spagnoli, R. Brighenti, M. Montanari, M. Terzano.
Published in: Soft Matter, Issue 19, 2023, Page(s) 3629-3639, ISSN 1744-6848
Publisher: Royal Society of Chemistry
DOI: 10.1039/d3sm00011g

Lifetime prediction in medium-cycle fatigue regime of notched specimens

Author(s): R. Negru, D.A. Șerban, L. Marșavina, A. Magda
Published in: Theoretical and Applied Fracture Mechanics, Issue 84, 2016, Page(s) 140-148, ISSN 0167-8442
Publisher: Elsevier BV
DOI: 10.1016/j.tafmec.2016.03.006

Experimental validation of micromechanical models for brittle aluminium alloy foam

Author(s): Liviu Marsavina, Jaroslav Kováčik, Emanoil Linul
Published in: Theoretical and Applied Fracture Mechanics, Issue 83, 2016, Page(s) 11-18, ISSN 0167-8442
Publisher: Elsevier BV
DOI: 10.1016/j.tafmec.2015.12.020

Evaluation of the mechanical and morphological properties of long fibre reinforced polyurethane rigid foams

Author(s): Dan-Andrei Şerban, Oliver Weissenborn, Sirko Geller, Liviu Marşavina, Maik Gude
Published in: Polymer Testing, Issue 49, 2016, Page(s) 121-127, ISSN 0142-9418
Publisher: Elsevier BV
DOI: 10.1016/j.polymertesting.2015.11.007

Experimental and numerical crack paths in PUR foams

Author(s): Liviu Marsavina, Dan M. Constantinescu, Emanoil Linul, Florin A. Stuparu, Dragos A. Apostol
Published in: Engineering Fracture Mechanics, Issue 167, 2016, Page(s) 68-83, ISSN 0013-7944
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.engfracmech.2016.03.043

Low-cycle fatigue behaviour of ductile closed-cell aluminium alloy foams

Author(s): E. Linul, D. A. Şerban, L. Marsavina, J. Kovacik
Published in: Fatigue & Fracture of Engineering Materials & Structures, Issue 40/4, 2017, Page(s) 597-604, ISSN 8756-758X
Publisher: Blackwell Publishing Inc.
DOI: 10.1111/ffe.12535

Assessment of collapse diagrams of rigid polyurethane foams under dynamic loading conditions

Author(s): Emanoil Linul, Dan Andrei Şerban, Liviu Marsavina, Tomasz Sadowski
Published in: Archives of Civil and Mechanical Engineering, Issue 17/3, 2017, Page(s) 457-466, ISSN 1644-9665
Publisher: Elsevier Urban/Partners Sp. z.o.o.
DOI: 10.1016/j.acme.2016.12.009

DYNAMIC AND QUASI-STATIC COMPRESSION TESTS OF CLOSED-CELL ALUMINIUM ALLOY FOAMS

Author(s): Emanoil LINUL, Liviu MARSAVINA, Jaroslav KOVACIK, Tomasz SADOWSKI
Published in: PROCEEDINGS OF THE ROMANIAN ACADEMY, Series A, Issue 18/4, 2017, Page(s) 361-369, ISSN 1454-9069
Publisher: Academia Romana

Collapse mechanisms of metal foam matrix composites under static and dynamic loading conditions

Author(s): Emanoil Linul, Liviu Marsavina, Jaroslav Kováčik
Published in: Materials Science and Engineering: A, Issue 690, 2017, Page(s) 214-224, ISSN 0921-5093
Publisher: Elsevier BV
DOI: 10.1016/j.msea.2017.03.009

An engineering approach to predict mixed mode fracture of PUR foams based on ASED and micromechanical modelling

Author(s): Liviu Marsavina, Filippo Berto, Radu Negru, Dan Andrei Serban, Emanoil Linul
Published in: Theoretical and Applied Fracture Mechanics, Issue 91, 2017, Page(s) 148-154, ISSN 0167-8442
Publisher: Elsevier BV
DOI: 10.1016/j.tafmec.2017.06.008

The temperature effect on the axial quasi-static compressive behavior of ex-situ aluminum foam-filled tubes

Author(s): Emanoil Linul, Nima Movahedi, Liviu Marsavina
Published in: Composite Structures, Issue 180, 2017, Page(s) 709-722, ISSN 0263-8223
Publisher: Elsevier BV
DOI: 10.1016/j.compstruct.2017.08.034

Influence of Cell Topology on Mode I Fracture Toughness of Cellular Structures

Author(s): E. Linul, D. A. Serban, L. Marsavina
Published in: Physical Mesomechanics, Issue 21/2, 2018, Page(s) 178-186, ISSN 1029-9599
Publisher: Elsevier BV
DOI: 10.1134/s1029959918020121

The temperature and anisotropy effect on compressive behavior of cylindrical closed-cell aluminum-alloy foams

Author(s): Emanoil Linul, Nima Movahedi, Liviu Marsavina
Published in: Journal of Alloys and Compounds, Issue 740, 2018, Page(s) 1172-1179, ISSN 0925-8388
Publisher: Elsevier BV
DOI: 10.1016/j.jallcom.2018.01.102

Notch effect assessment in a PUR material using a ring shaped specimen

Author(s): R. Negru, D.A. Serban, C. Pop, L. Marsavina
Published in: Theoretical and Applied Fracture Mechanics, Issue 97, 2018, Page(s) 500-506, ISSN 0167-8442
Publisher: Elsevier BV
DOI: 10.1016/j.tafmec.2018.01.016

Experimental and theoretical fracture toughness investigation of PUR foams under mixed mode I+III loading

Author(s): M.R.M. Aliha, E. Linul, A. Bahmani, L. Marsavina
Published in: Polymer Testing, Issue 67, 2018, Page(s) 75-83, ISSN 0142-9418
Publisher: Elsevier BV
DOI: 10.1016/j.polymertesting.2018.02.015

On the Lateral Compressive Behavior of Empty and Ex-Situ Aluminum Foam-Filled Tubes at High Temperature

Author(s): Emanoil Linul, Nima Movahedi, Liviu Marsavina
Published in: Materials, Issue 11/4, 2018, Page(s) 554, ISSN 1996-1944
Publisher: MDPI Open Access Publishing
DOI: 10.3390/ma11040554

Poisson’s Ratio of Closed-Cell Aluminium Foams

Author(s): Jaroslav Kováčik, Liviu Marsavina, Emanoil Linul
Published in: Materials, Issue 11/10, 2018, Page(s) 1904, ISSN 1996-1944
Publisher: MDPI Open Access Publishing
DOI: 10.3390/ma11101904

The effects of layers orientation on impact energy evaluation of FDM printed specimens

Author(s): Ailinei, I. I., Galatanu, S. V., Marsavina, L
Published in: Material Design and Processing Communications, Issue 3(6), 2021, Page(s) e267, ISSN 2577-6576
Publisher: John Wiley & Sons Ltd
DOI: 10.1002/mdp2.267

Crack‐tip blunting and its implications on fracture of soft materials

Author(s): Spagnoli, R. Brighenti, M. Montanari, M. Terzano
Published in: Fatigue and Fracture of Engineering Materials & Structures, Issue 46, 2023, Page(s) 1627-1637, ISSN 1460-2695
Publisher: John Wiley & Sons Ltd
DOI: 10.1111/ffe.13951

Impact properties of laser sintered polyamide, according to building orientation

Author(s): Stoia, D. I., Galatanu, S. V., Marsavina, L.
Published in: Journal of Mechanical Science and Technology, Issue 37, 2023, Page(s) 1119–1123, ISSN 1738-494X
Publisher: Korean Society of Mechanical Engineers
DOI: 10.1007/s12206-022-2108-0

Mixed-mode I/II fracture properties of selectively laser sintered polyamide

Author(s): Stoia, D. I., Linul, E., & Marsavina, L.
Published in: Theoretical and Applied Fracture Mechanics, Issue 121, 2022, Page(s) 103527, ISSN 1872-7638
Publisher: Elsevier
DOI: 10.1016/j.tafmec.2022.103527

Fracture toughness of rigid polymeric foams: A review

Author(s): Liviu Marșavina, Emanoil Linul
Published in: Fatigue & Fracture of Engineering Materials & Structures, Issue 43/11, 2020, Page(s) 2483-2514, ISSN 8756-758X
Publisher: Blackwell Publishing Inc.
DOI: 10.1111/ffe.13327

Photopolymerized AM materials: modelling of the printing process, mechanical behavior and sensitivity analysis

Author(s): Mattia Pancrazio Cosma; Roberto Brighenti
Published in: Material Design and Processing Communications, Issue 3(6), 2021, Page(s) e225, ISSN 2577-6576
Publisher: John Wiley & Sons Ltd
DOI: 10.1002/mdp2.225

Failure Locus of an ABS-Based Compound Manufactured through Photopolymerization.

Author(s): Dan-Andrei Șerban; Alexandru Viorel Coșa; George Belgiu; Radu Negru
Published in: Polymers, Issue Volume 14; Issue 18; Article 3822, 2022, ISSN 2073-4360
Publisher: MDPI
DOI: 10.3390/polym14183822

Dimensional accuracy of parts obtained by SLS technology

Author(s): Jevtić, I., Mladenović, G., Milosević, M., Milovanović, A., Trajković, I., Travica, M.
Published in: Structural Integrity and Life, Issue 22(3), 2022, Page(s) 288–292, ISSN 1451-3749
Publisher: Society for Structural Integrity and Life

Controlled morphing of architected liquid crystal elastomer elements: modeling and simulations

Author(s): Cosma M.P., Brighenti R.
Published in: Mechanics Research Communications, Issue 121, 2022, Page(s) 103858, ISSN 0093-6413
Publisher: Pergamon Press
DOI: 10.1016/j.mechrescom.2022.103858

Mechanical behavior of photopolymerized materials

Author(s): Roberto Brighenti, Mattia Pancrazio Cosma
Published in: Journal of the Mechanics and Physics of Solids, Issue 153, 2021, Page(s) 104456, ISSN 0022-5096
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.jmps.2021.104456

Multiphysics modelling of light-actuated liquid crystal elastomers

Author(s): Brighenti, R., Cosma, M.P.
Published in: Proceedings of the Royal Society A, Issue 479 (2269), 2023, ISSN 1471-2946
Publisher: The Royal Society
DOI: 10.1098/rspa.2022.0417

Experimental testing of two short‐fiber reinforced composites: PPA‐GF33 and PPS‐GF40

Author(s): Micota, D., Isaincu, A., Marşavina, L.
Published in: Material Design and Processing Communications,, Issue 3(6), 2021, Page(s) e264, ISSN 2577-6576
Publisher: John Wiley & Sons Ltd
DOI: 10.1002/mdp2.264

Anomalous fatigue crack propagation behavior in near-threshold region of L-PBF prepared austenitic stainless steel

Author(s): Jambor, M., Vojtek, T., Pokorny, P., Koutny, D., Nahlik, L., Hutař, P., Smid, M.
Published in: Materials Science and Engineering: A,, Issue 872, 2023, Page(s) 144982, ISSN 0921-5093
Publisher: Elsevier BV
DOI: 10.1016/j.msea.2023.144982

Tensile properties of Polypropylene additively manufactured by FDM

Author(s): Milovanović, A., Golubović, Z., Babinsky, T., Sulak, I., Mitrović, A.
Published in: Structural Integrity and Life, Issue 22(3), 2022, Page(s) 305-308, ISSN 1451-3749
Publisher: Society for Structural Integrity and Life

Fracture toughness in additive manufacturing by selective laser sintering: an overview

Author(s): Marșavina, L., Stoia, D. I., & Emanoil, L.
Published in: Material Design and Processing Communications, Issue 3(6), 2021, Page(s) e254, ISSN 2577-6576
Publisher: John Wiley & Sons Ltd
DOI: 10.1002/mdp2.254

Smart Polymers for Advanced Applications: A Mechanical Perspective Review

Author(s): Roberto Brighenti, Ying Li, Franck J. Vernerey
Published in: Frontiers in Materials, Issue 7, 2020, Page(s) 1-18, ISSN 2296-8016
Publisher: Frontiers
DOI: 10.3389/fmats.2020.00196

Additively manufactured multi-morphology bone-like porous scaffolds: experiments and micro-computed tomography finite element modeling approaches

Author(s): R. Noroozi, F. Tatar, M. Bodaghi, A. Zolfagharian, R. Brighenti, M. Amin Shamekhi, A.R. Ghamsari, A. Hadi
Published in: International Journal of Bioprinting, Issue 8(3), 2022, Page(s) 556, ISSN 2424-7723
Publisher: Whioce Publishing
DOI: 10.18063/ijb.v8i3.556

Mechanical behavior of photopolymerized materials

Author(s): Roberto Brighenti; Mattia Pancrazio Cosma
Published in: Journal of the Mechanics and Physics of Solids, Issue 153, 104456, 2021, ISSN 0022-5096
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.jmps.2021.104456

Crack path direction in plane-strain fracture toughness assessment tests of quasi-brittle PLA polymer and ductile PLA-X composite

Author(s): Milovanović, A., Milosević, M., Trajković, I., Sedmak, A., Razavi, M.J., Berto, F
Published in: Procedia Structural Integrity, Issue 42, 2022, Page(s) 1376-1381, ISSN 2452-3216
Publisher: Elsevier B.V.
DOI: 10.1016/j.prostr.2022.12.175

The effect of process parameters on mechanical characteristics of specimens obtained via DLP additive manufacturing technology

Author(s): Roberto Brighenti; Liviu Marsavina; Mihai P. Marghitas; Matteo Montanari; Andrea Spagnoli; Farzad Tatar
Published in: Materials Today: Proceedings, Issue Volume 78, Part 2, 2023, Page(s) 331-336, ISSN 2214-7853
Publisher: Elsevier
DOI: 10.1016/j.matpr.2023.01.092

Side-groove effect on fracture mechanical fatigue testing of PLA material

Author(s): Milovanović, A., Poduska, J., Travniček, L., Nahlik, L., Sedmak, A., Milosević, M., Berto, F.
Published in: Procedia Structural Integrity, Issue 42, 2022, Page(s) 847-856, ISSN 2452-3216
Publisher: Elsevier B.V.
DOI: 10.1016/j.prostr.2022.12.107

Effect of manufacturing parameters on tensile properties of FDM printed specimens

Author(s): Cristina Vălean, Liviu Marșavina, Mihai Mărghitaș, Emanoil Linul, Javad Razavi, Filippo Berto
Published in: Procedia Structural Integrity, Issue 26, 2020, Page(s) 313-320, ISSN 2452-3216
Publisher: Elsevier BV
DOI: 10.1016/j.prostr.2020.06.040

Comparative analysis of printing parameters effect on mechanical properties of natural PLA and advanced PLA-X material

Author(s): Aleksa Milovanović; Aleksandar Sedmak; Aleksandar Grbović; Zorana Golubović; Goran Mladenovic; Katarina Čolić; Miloš Milošević
Published in: Procedia Structural Integrity, Issue 28, 2020, Page(s) 1963-1968, ISSN 2452-3216
Publisher: Elsevier
DOI: 10.1016/j.prostr.2020.11.019

On The Fracture Toughness Of PPS And PPA Reinforced With Glass Fiber

Author(s): Isaincu, A., Micota, D., & Marşavina, L.
Published in: Procedia Structural Integrity, Issue 41, 2022, Page(s) 646-655, ISSN 2452-3216
Publisher: Elsevier
DOI: 10.1016/j.prostr.2022.05.073

Influence of printing parameters on the eligibility of plane-strain fracture toughness results for PLA polymer

Author(s): Milovanović, A., Golubović, Z., Trajković, I., Sedmak, A., Milosević, M., Valean, E., Marsavina, L.
Published in: Procedia Structural Integrity, Issue 41, 2022, Page(s) 290-297, ISSN 2452-3216
Publisher: Elsevier
DOI: 10.1016/j.prostr.2022.05.034

Mixed modes crack paths in SCB specimens obtained via SLS

Author(s): Marsavina, L., Stoia, D. I., Linul, E.
Published in: Procedia Structural Integrity, Issue 39, 2022, Page(s) 801-807, ISSN 2452-3216
Publisher: Elsevier
DOI: 10.1016/j.prostr.2022.03.153

On Mode I crack mechanism in the puncturing of soft tissues.

Author(s): Spagnoli A., Brighenti R. , Alberini R., Cosma M.P., Montanari M., Terzano M.
Published in: Procedia Structural Integrity, Issue 41, 2022, Page(s) 656-663, ISSN 2452-3216
Publisher: Elsevier B.V.
DOI: 10.1016/j.prostr.2022.05.074

Bending behavior of AM50 Magnesium alloy under static and dynamic loading

Author(s): Sergiu-Valentin Galatanu, Milena Scano, Daniel Pietras, Liviu-Daniel Pirvulescu, Maria Cristina Porcu, Liviu Marsavina, Tomasz Sadowski
Published in: Procedia Structural Integrity, Issue 26, 2020, Page(s) 269-276, ISSN 2452-3216
Publisher: Elsevier BV
DOI: 10.1016/j.prostr.2020.06.034

Computational mechanical modeling of human skin for the simulation of reconstructive surgery procedures

Author(s): Alberini R., Spagnoli A., Terzano M., Raposio E.
Published in: Procedia Structural Integrity, Issue 33, 2021, Page(s) 556-563, ISSN 2452-3216
Publisher: Elsevier B.V.
DOI: 10.1016/j.prostr.2021.10.061

Numerical and experimental study for FDM printed specimens from PLA under IZOD impact tests

Author(s): Cosmin Florin Popa; Tamas Krausz; Sergiu-Valentin Galatanu; Emanoil Linul; Liviu Marsavina
Published in: Materials Today: Proceedings, Issue Volume 78, Part 2, 2023, Page(s) 326-330, ISSN 2214-7853
Publisher: Elsevier
DOI: 10.1016/j.matpr.2022.11.501

The effect of crack insertion for FDM printed PLA materials on Mode I and Mode II fracture toughness

Author(s): Cristina Vălean, Liviu Marșavina, Mihai Mărghitaș, Emanoil Linul, Javad Razavi, Filippo Berto, Roberto Brighenti
Published in: Procedia Structural Integrity, Issue 28, 2020, Page(s) 1134-1139, ISSN 2452-3216
Publisher: Elsevier BV
DOI: 10.1016/j.prostr.2020.11.128

Searching for OpenAIRE data...

There was an error trying to search data from OpenAIRE

No results available