CORDIS - Risultati della ricerca dell’UE
CORDIS

Eastern European twinning on Structural Integrity and Reliability of Advanced Materials obtained through additive Manufacturing

Risultati finali

Website development

Website M3 The activities will be continuously updated with checkpoints every 6 months

E-newsletter

One newsletter will be published at M6 and then every six months to inform interested stakeholders of project main results innovation and benefits M6

1st WP2 workshops' book of abstract and PPT presentation

The workshops book of abstracts will be made available in electronic format A PPT presentations of the workshop will be delivered M24

1st WP1 workshops’ book of abstract and PPT presentation

The 1st workshops book of abstracts will be made available in electronic format A PPT presentation of the workshop will be also delivered M12

Video making for You Tube channel

Project videos for You Tube channel to be produced within the end of the project M36

2nd WP1 workshops' book of abstract and PPT presentation

The 2nd workshops book of abstracts and a PPT presentation M28

PEDR

PEDR M6 The first version of the PEDR will be produced as a specific deliverable at the beginning of the project The PEDR will contain information on communication activities eg visual identity press release public engagement activities summaries of annual workshops and networking events together with the dissemination ie scientific papers poster and oral communication in conference and congresses etc and exploitation measures implemented during the project The PEDR will be updated in the interim and final report for EU

Pubblicazioni

The effect of time on mechanical properties of biocompatible photopolymer resins used for fabrication of clear dental aligners

Autori: Aleksa Milovanović, Aleksandar Sedmak, Zorana Golubović, Ksenija Zelić Mihajlović, Aleksandar Žurkić, Isaak Trajković, Miloš Milošević
Pubblicato in: Journal of the Mechanical Behavior of Biomedical Materials, Numero 119, 2021, Pagina/e 104494, ISSN 1751-6161
Editore: Elsevier BV
DOI: 10.1016/j.jmbbm.2021.104494

Mode I Fracture Toughness of Polyamide and Alumide Samples obtained by Selective Laser Sintering Additive Process

Autori: Dan Ioan Stoia, Liviu Marsavina, Emanoil Linul
Pubblicato in: Polymers, Numero 12/3, 2020, Pagina/e 640, ISSN 2073-4360
Editore: MDPI Open Access Publishing
DOI: 10.3390/polym12030640

Laser-based additively manufactured polymers: a review on processes and mechanical models

Autori: Roberto Brighenti, Mattia Pancrazio Cosma, Liviu Marsavina, Andrea Spagnoli, Michele Terzano
Pubblicato in: Journal of Materials Science, Numero 56/2, 2021, Pagina/e 961-998, ISSN 0022-2461
Editore: Kluwer Academic Publishers
DOI: 10.1007/s10853-020-05254-6

Novel method for measurement of pipeline materials fracture resistance-examination on selective laser sintered cylindrical specimens

Autori: Trajkovic, I., Milosevic, M., Travica, M., Rakin, M., Mladenovic, G., Kudrjavceva, L., Medo, B.
Pubblicato in: Science of Sintering, Numero 54 (3), 2022, Pagina/e 373-386, ISSN 0350-820X
Editore: Plenum Publishers
DOI: 10.2298/sos2203373t

The effect of time on mechanical properties of biocompatible photopolymer resins used for fabrication of clear dental aligners

Autori: Milovanović, A., Sedmak, A., Golubović, Z., Mihajlović, K. Z., Zurkić, A., Trajković, I., & Milosević, M.
Pubblicato in: Journal of the Mechanical Behavior of Biomedical Materials, Numero 119, 104494, 2021, ISSN 1751-6161
Editore: Elsevier BV
DOI: 10.1016/j.jmbbm.2021.104494

Mechanical characterization of additively manufactured photopolymerized polymers

Autori: Brighenti R., Marsavina L., Marghitas M.P., Cosma M.P., Montanari M.
Pubblicato in: Mechanics of Advanced Materials and Structures, Numero 30 (9), 2023, ISSN 1537-6494
Editore: Taylor & Francis
DOI: 10.1080/15376494.2022.2045655

Smart Polymers for Advanced Applications: A Mechanical Perspective Review

Autori: Roberto Brighenti; Ying Li; Franck J. Vernerey
Pubblicato in: Frontiers in Materials, Numero 7(196), 2020, Pagina/e 1-18, ISSN 2296-8016
Editore: Frontiers Media SA
DOI: 10.3389/fmats.2020.00196

Multiphysics modelling of the mechanical properties in polymers obtained via photo-induced polymerization

Autori: Roberto Brighenti, Mattia Pancrazio Cosma, Liviu Marsavina, Andrea Spagnoli & Michele Terzano
Pubblicato in: The International Journal of Advanced Manufacturing Technology, Numero 117, 2021, Pagina/e 481–499, ISSN 0268-3768
Editore: Springer Verlag
DOI: 10.1007/s00170-021-07273-2

Mechanics and physics of the light-driven response of hydrogels

Autori: R. Brighenti, M.P. Cosma, N. Cohen
Pubblicato in: Mechanics Research Communications, Numero 129, 2023, Pagina/e 104077, ISSN 0093-6413
Editore: Pergamon Press
DOI: 10.1016/j.mechrescom.2023.104077

Mode I critical energy release rate of additively manufactured polyamide samples

Autori: Dan Ioan Stoia, Liviu Marsavina, Emanoil Linul
Pubblicato in: Theoretical and Applied Fracture Mechanics, Numero 114, 2021, Pagina/e 102968, ISSN 0167-8442
Editore: Elsevier BV
DOI: 10.1016/j.tafmec.2021.102968

Influence of anisotropy on the cold bending of S600MC sheet metal

Autori: Ailinei, I. I., Galatanu, S. V., & Marsavina, L.
Pubblicato in: Engineering Failure Analysis, Numero 137; 106206, 2022, ISSN 1873-1961
Editore: Elsevier
DOI: 10.1016/j.engfailanal.2022.106206

Mode I and II fracture toughness investigation of Laser-Sintered Polyamide

Autori: Emanoil Linul, Liviu Marsavina, Dan Ioan Stoia
Pubblicato in: Theoretical and Applied Fracture Mechanics, Numero 106, 2020, Pagina/e 102497, ISSN 0167-8442
Editore: Elsevier BV
DOI: 10.1016/j.tafmec.2020.102497

Charpy impact properties and numerical modeling of polycarbonate composites

Autori: Krausz, T., Ailinei, I. I., Galatanu, S. V., Marsavina, L.
Pubblicato in: Material Design and Processing Communications,, Numero 3(4), 2021, Pagina/e e260, ISSN 2577-6576
Editore: John Wiley & Sons Ltd
DOI: 10.1002/mdp2.260

Effect of the manufacturing parameters on the tensile and fracture properties of FDM 3D-printed PLA specimens

Autori: L. Marșavina, C. Vălean, M. Mărghitaș, E. Linul, S. M. J. Razavi, F. Berto, R. Brighenti
Pubblicato in: Engineering Fracture Mechanics, Numero 274, 2022, Pagina/e 108766, ISSN 0013-7944
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.engfracmech.2022.108766

Photopolymerized additive manufacturing materials: Modeling of the printing process, mechanical behavior, and sensitivity analysis

Autori: Mattia Pancrazio Cosma, Roberto Brighenti
Pubblicato in: Material Design & Processing Communications, Numero 225, 2021, Pagina/e 1-9, ISSN 2577-6576
Editore: Wiley & Sins
DOI: 10.1002/mdp2.225

Comparative analysis of printing parameters effect on mechanical properties of natural PLA and advanced PLA-X material

Autori: Aleksa Milovanović, Aleksandar Sedmak, Aleksandar Grbović, Zorana Golubović, Goran Mladenović, Katarina Čolić, Miloš Milošević
Pubblicato in: Procedia Structural Integrity, Numero 28, 2020, Pagina/e 1963-1968, ISSN 2452-3216
Editore: Elsevier BV
DOI: 10.1016/j.prostr.2020.11.019

Smart actuation of liquid crystal elastomer elements: cross-link density-controlled response

Autori: Brighenti R. , Cosma M.P.
Pubblicato in: Smart Materials and Structures, Numero 31(1), 015012, 2022, ISSN 1361-665X
Editore: IOPscience
DOI: 10.1088/1361-665x/ac34bf

Influence of the Printing Angle and Load Direction on Flexure Strength in 3D Printed Materials for Provisional Dental Restorations

Autori: Paula Derban, Romeo Negrea, Mihai Rominu, Liviu Marsavina
Pubblicato in: Materials, Numero 14/12, 2021, Pagina/e 3376, ISSN 1996-1944
Editore: MDPI Open Access Publishing
DOI: 10.3390/ma14123376

Optimisation of the Heterogeneous Joining Process of AlMg3 and X2CrNiMo17-12-2 Alloy by FSW Method

Autori: A. Feier, I. Both, E. Petzek.
Pubblicato in: Materials, Numero 16(7), 2023, Pagina/e 2750, ISSN 1996-1944
Editore: MDPI Open Access Publishing
DOI: 10.3390/ma16072750

Cyclic behaviour and microstructural evolution of metastable austenitic stainless steel 304 L produced by laser powder bed fusion

Autori: Smid, M., Koutny, D., Neumannova, K., Chlup, Z., Nahlik, L., & Jambor, M.
Pubblicato in: Additive Manufacturing, Numero 68, 2023, Pagina/e 103503, ISSN 2214-8604
Editore: Elsevier BV
DOI: 10.1016/j.addma.2023.103503

Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication

Autori: Benedetti, M., Du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, S.M.J., & Berto, F.
Pubblicato in: Materials Science and Engineering: R: Reports, Numero 144, 100606, 2021, ISSN 0927-796X
Editore: Elsevier BV
DOI: 10.1016/j.mser.2021.100606

Puncturing of soft tissues: experimental and fracture mechanics-based study

Autori: A. Spagnoli, R. Brighenti, M. Montanari, M. Terzano.
Pubblicato in: Soft Matter, Numero 19, 2023, Pagina/e 3629-3639, ISSN 1744-6848
Editore: Royal Society of Chemistry
DOI: 10.1039/d3sm00011g

Lifetime prediction in medium-cycle fatigue regime of notched specimens

Autori: R. Negru, D.A. Șerban, L. Marșavina, A. Magda
Pubblicato in: Theoretical and Applied Fracture Mechanics, Numero 84, 2016, Pagina/e 140-148, ISSN 0167-8442
Editore: Elsevier BV
DOI: 10.1016/j.tafmec.2016.03.006

Experimental validation of micromechanical models for brittle aluminium alloy foam

Autori: Liviu Marsavina, Jaroslav Kováčik, Emanoil Linul
Pubblicato in: Theoretical and Applied Fracture Mechanics, Numero 83, 2016, Pagina/e 11-18, ISSN 0167-8442
Editore: Elsevier BV
DOI: 10.1016/j.tafmec.2015.12.020

Evaluation of the mechanical and morphological properties of long fibre reinforced polyurethane rigid foams

Autori: Dan-Andrei Şerban, Oliver Weissenborn, Sirko Geller, Liviu Marşavina, Maik Gude
Pubblicato in: Polymer Testing, Numero 49, 2016, Pagina/e 121-127, ISSN 0142-9418
Editore: Elsevier BV
DOI: 10.1016/j.polymertesting.2015.11.007

Experimental and numerical crack paths in PUR foams

Autori: Liviu Marsavina, Dan M. Constantinescu, Emanoil Linul, Florin A. Stuparu, Dragos A. Apostol
Pubblicato in: Engineering Fracture Mechanics, Numero 167, 2016, Pagina/e 68-83, ISSN 0013-7944
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.engfracmech.2016.03.043

Low-cycle fatigue behaviour of ductile closed-cell aluminium alloy foams

Autori: E. Linul, D. A. Şerban, L. Marsavina, J. Kovacik
Pubblicato in: Fatigue & Fracture of Engineering Materials & Structures, Numero 40/4, 2017, Pagina/e 597-604, ISSN 8756-758X
Editore: Blackwell Publishing Inc.
DOI: 10.1111/ffe.12535

Assessment of collapse diagrams of rigid polyurethane foams under dynamic loading conditions

Autori: Emanoil Linul, Dan Andrei Şerban, Liviu Marsavina, Tomasz Sadowski
Pubblicato in: Archives of Civil and Mechanical Engineering, Numero 17/3, 2017, Pagina/e 457-466, ISSN 1644-9665
Editore: Elsevier Urban/Partners Sp. z.o.o.
DOI: 10.1016/j.acme.2016.12.009

DYNAMIC AND QUASI-STATIC COMPRESSION TESTS OF CLOSED-CELL ALUMINIUM ALLOY FOAMS

Autori: Emanoil LINUL, Liviu MARSAVINA, Jaroslav KOVACIK, Tomasz SADOWSKI
Pubblicato in: PROCEEDINGS OF THE ROMANIAN ACADEMY, Series A, Numero 18/4, 2017, Pagina/e 361-369, ISSN 1454-9069
Editore: Academia Romana

Collapse mechanisms of metal foam matrix composites under static and dynamic loading conditions

Autori: Emanoil Linul, Liviu Marsavina, Jaroslav Kováčik
Pubblicato in: Materials Science and Engineering: A, Numero 690, 2017, Pagina/e 214-224, ISSN 0921-5093
Editore: Elsevier BV
DOI: 10.1016/j.msea.2017.03.009

An engineering approach to predict mixed mode fracture of PUR foams based on ASED and micromechanical modelling

Autori: Liviu Marsavina, Filippo Berto, Radu Negru, Dan Andrei Serban, Emanoil Linul
Pubblicato in: Theoretical and Applied Fracture Mechanics, Numero 91, 2017, Pagina/e 148-154, ISSN 0167-8442
Editore: Elsevier BV
DOI: 10.1016/j.tafmec.2017.06.008

The temperature effect on the axial quasi-static compressive behavior of ex-situ aluminum foam-filled tubes

Autori: Emanoil Linul, Nima Movahedi, Liviu Marsavina
Pubblicato in: Composite Structures, Numero 180, 2017, Pagina/e 709-722, ISSN 0263-8223
Editore: Elsevier BV
DOI: 10.1016/j.compstruct.2017.08.034

Influence of Cell Topology on Mode I Fracture Toughness of Cellular Structures

Autori: E. Linul, D. A. Serban, L. Marsavina
Pubblicato in: Physical Mesomechanics, Numero 21/2, 2018, Pagina/e 178-186, ISSN 1029-9599
Editore: Elsevier BV
DOI: 10.1134/s1029959918020121

The temperature and anisotropy effect on compressive behavior of cylindrical closed-cell aluminum-alloy foams

Autori: Emanoil Linul, Nima Movahedi, Liviu Marsavina
Pubblicato in: Journal of Alloys and Compounds, Numero 740, 2018, Pagina/e 1172-1179, ISSN 0925-8388
Editore: Elsevier BV
DOI: 10.1016/j.jallcom.2018.01.102

Notch effect assessment in a PUR material using a ring shaped specimen

Autori: R. Negru, D.A. Serban, C. Pop, L. Marsavina
Pubblicato in: Theoretical and Applied Fracture Mechanics, Numero 97, 2018, Pagina/e 500-506, ISSN 0167-8442
Editore: Elsevier BV
DOI: 10.1016/j.tafmec.2018.01.016

Experimental and theoretical fracture toughness investigation of PUR foams under mixed mode I+III loading

Autori: M.R.M. Aliha, E. Linul, A. Bahmani, L. Marsavina
Pubblicato in: Polymer Testing, Numero 67, 2018, Pagina/e 75-83, ISSN 0142-9418
Editore: Elsevier BV
DOI: 10.1016/j.polymertesting.2018.02.015

On the Lateral Compressive Behavior of Empty and Ex-Situ Aluminum Foam-Filled Tubes at High Temperature

Autori: Emanoil Linul, Nima Movahedi, Liviu Marsavina
Pubblicato in: Materials, Numero 11/4, 2018, Pagina/e 554, ISSN 1996-1944
Editore: MDPI Open Access Publishing
DOI: 10.3390/ma11040554

Poisson’s Ratio of Closed-Cell Aluminium Foams

Autori: Jaroslav Kováčik, Liviu Marsavina, Emanoil Linul
Pubblicato in: Materials, Numero 11/10, 2018, Pagina/e 1904, ISSN 1996-1944
Editore: MDPI Open Access Publishing
DOI: 10.3390/ma11101904

The effects of layers orientation on impact energy evaluation of FDM printed specimens

Autori: Ailinei, I. I., Galatanu, S. V., Marsavina, L
Pubblicato in: Material Design and Processing Communications, Numero 3(6), 2021, Pagina/e e267, ISSN 2577-6576
Editore: John Wiley & Sons Ltd
DOI: 10.1002/mdp2.267

Crack‐tip blunting and its implications on fracture of soft materials

Autori: Spagnoli, R. Brighenti, M. Montanari, M. Terzano
Pubblicato in: Fatigue and Fracture of Engineering Materials & Structures, Numero 46, 2023, Pagina/e 1627-1637, ISSN 1460-2695
Editore: John Wiley & Sons Ltd
DOI: 10.1111/ffe.13951

Impact properties of laser sintered polyamide, according to building orientation

Autori: Stoia, D. I., Galatanu, S. V., Marsavina, L.
Pubblicato in: Journal of Mechanical Science and Technology, Numero 37, 2023, Pagina/e 1119–1123, ISSN 1738-494X
Editore: Korean Society of Mechanical Engineers
DOI: 10.1007/s12206-022-2108-0

Mixed-mode I/II fracture properties of selectively laser sintered polyamide

Autori: Stoia, D. I., Linul, E., & Marsavina, L.
Pubblicato in: Theoretical and Applied Fracture Mechanics, Numero 121, 2022, Pagina/e 103527, ISSN 1872-7638
Editore: Elsevier
DOI: 10.1016/j.tafmec.2022.103527

Fracture toughness of rigid polymeric foams: A review

Autori: Liviu Marșavina, Emanoil Linul
Pubblicato in: Fatigue & Fracture of Engineering Materials & Structures, Numero 43/11, 2020, Pagina/e 2483-2514, ISSN 8756-758X
Editore: Blackwell Publishing Inc.
DOI: 10.1111/ffe.13327

Photopolymerized AM materials: modelling of the printing process, mechanical behavior and sensitivity analysis

Autori: Mattia Pancrazio Cosma; Roberto Brighenti
Pubblicato in: Material Design and Processing Communications, Numero 3(6), 2021, Pagina/e e225, ISSN 2577-6576
Editore: John Wiley & Sons Ltd
DOI: 10.1002/mdp2.225

Failure Locus of an ABS-Based Compound Manufactured through Photopolymerization.

Autori: Dan-Andrei Șerban; Alexandru Viorel Coșa; George Belgiu; Radu Negru
Pubblicato in: Polymers, Numero Volume 14; Numero 18; Article 3822, 2022, ISSN 2073-4360
Editore: MDPI
DOI: 10.3390/polym14183822

Dimensional accuracy of parts obtained by SLS technology

Autori: Jevtić, I., Mladenović, G., Milosević, M., Milovanović, A., Trajković, I., Travica, M.
Pubblicato in: Structural Integrity and Life, Numero 22(3), 2022, Pagina/e 288–292, ISSN 1451-3749
Editore: Society for Structural Integrity and Life

Controlled morphing of architected liquid crystal elastomer elements: modeling and simulations

Autori: Cosma M.P., Brighenti R.
Pubblicato in: Mechanics Research Communications, Numero 121, 2022, Pagina/e 103858, ISSN 0093-6413
Editore: Pergamon Press
DOI: 10.1016/j.mechrescom.2022.103858

Mechanical behavior of photopolymerized materials

Autori: Roberto Brighenti, Mattia Pancrazio Cosma
Pubblicato in: Journal of the Mechanics and Physics of Solids, Numero 153, 2021, Pagina/e 104456, ISSN 0022-5096
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.jmps.2021.104456

Multiphysics modelling of light-actuated liquid crystal elastomers

Autori: Brighenti, R., Cosma, M.P.
Pubblicato in: Proceedings of the Royal Society A, Numero 479 (2269), 2023, ISSN 1471-2946
Editore: The Royal Society
DOI: 10.1098/rspa.2022.0417

Experimental testing of two short‐fiber reinforced composites: PPA‐GF33 and PPS‐GF40

Autori: Micota, D., Isaincu, A., Marşavina, L.
Pubblicato in: Material Design and Processing Communications,, Numero 3(6), 2021, Pagina/e e264, ISSN 2577-6576
Editore: John Wiley & Sons Ltd
DOI: 10.1002/mdp2.264

Anomalous fatigue crack propagation behavior in near-threshold region of L-PBF prepared austenitic stainless steel

Autori: Jambor, M., Vojtek, T., Pokorny, P., Koutny, D., Nahlik, L., Hutař, P., Smid, M.
Pubblicato in: Materials Science and Engineering: A,, Numero 872, 2023, Pagina/e 144982, ISSN 0921-5093
Editore: Elsevier BV
DOI: 10.1016/j.msea.2023.144982

Tensile properties of Polypropylene additively manufactured by FDM

Autori: Milovanović, A., Golubović, Z., Babinsky, T., Sulak, I., Mitrović, A.
Pubblicato in: Structural Integrity and Life, Numero 22(3), 2022, Pagina/e 305-308, ISSN 1451-3749
Editore: Society for Structural Integrity and Life

Fracture toughness in additive manufacturing by selective laser sintering: an overview

Autori: Marșavina, L., Stoia, D. I., & Emanoil, L.
Pubblicato in: Material Design and Processing Communications, Numero 3(6), 2021, Pagina/e e254, ISSN 2577-6576
Editore: John Wiley & Sons Ltd
DOI: 10.1002/mdp2.254

Smart Polymers for Advanced Applications: A Mechanical Perspective Review

Autori: Roberto Brighenti, Ying Li, Franck J. Vernerey
Pubblicato in: Frontiers in Materials, Numero 7, 2020, Pagina/e 1-18, ISSN 2296-8016
Editore: Frontiers
DOI: 10.3389/fmats.2020.00196

Additively manufactured multi-morphology bone-like porous scaffolds: experiments and micro-computed tomography finite element modeling approaches

Autori: R. Noroozi, F. Tatar, M. Bodaghi, A. Zolfagharian, R. Brighenti, M. Amin Shamekhi, A.R. Ghamsari, A. Hadi
Pubblicato in: International Journal of Bioprinting, Numero 8(3), 2022, Pagina/e 556, ISSN 2424-7723
Editore: Whioce Publishing
DOI: 10.18063/ijb.v8i3.556

Mechanical behavior of photopolymerized materials

Autori: Roberto Brighenti; Mattia Pancrazio Cosma
Pubblicato in: Journal of the Mechanics and Physics of Solids, Numero 153, 104456, 2021, ISSN 0022-5096
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.jmps.2021.104456

Crack path direction in plane-strain fracture toughness assessment tests of quasi-brittle PLA polymer and ductile PLA-X composite

Autori: Milovanović, A., Milosević, M., Trajković, I., Sedmak, A., Razavi, M.J., Berto, F
Pubblicato in: Procedia Structural Integrity, Numero 42, 2022, Pagina/e 1376-1381, ISSN 2452-3216
Editore: Elsevier B.V.
DOI: 10.1016/j.prostr.2022.12.175

The effect of process parameters on mechanical characteristics of specimens obtained via DLP additive manufacturing technology

Autori: Roberto Brighenti; Liviu Marsavina; Mihai P. Marghitas; Matteo Montanari; Andrea Spagnoli; Farzad Tatar
Pubblicato in: Materials Today: Proceedings, Numero Volume 78, Part 2, 2023, Pagina/e 331-336, ISSN 2214-7853
Editore: Elsevier
DOI: 10.1016/j.matpr.2023.01.092

Side-groove effect on fracture mechanical fatigue testing of PLA material

Autori: Milovanović, A., Poduska, J., Travniček, L., Nahlik, L., Sedmak, A., Milosević, M., Berto, F.
Pubblicato in: Procedia Structural Integrity, Numero 42, 2022, Pagina/e 847-856, ISSN 2452-3216
Editore: Elsevier B.V.
DOI: 10.1016/j.prostr.2022.12.107

Effect of manufacturing parameters on tensile properties of FDM printed specimens

Autori: Cristina Vălean, Liviu Marșavina, Mihai Mărghitaș, Emanoil Linul, Javad Razavi, Filippo Berto
Pubblicato in: Procedia Structural Integrity, Numero 26, 2020, Pagina/e 313-320, ISSN 2452-3216
Editore: Elsevier BV
DOI: 10.1016/j.prostr.2020.06.040

Comparative analysis of printing parameters effect on mechanical properties of natural PLA and advanced PLA-X material

Autori: Aleksa Milovanović; Aleksandar Sedmak; Aleksandar Grbović; Zorana Golubović; Goran Mladenovic; Katarina Čolić; Miloš Milošević
Pubblicato in: Procedia Structural Integrity, Numero 28, 2020, Pagina/e 1963-1968, ISSN 2452-3216
Editore: Elsevier
DOI: 10.1016/j.prostr.2020.11.019

On The Fracture Toughness Of PPS And PPA Reinforced With Glass Fiber

Autori: Isaincu, A., Micota, D., & Marşavina, L.
Pubblicato in: Procedia Structural Integrity, Numero 41, 2022, Pagina/e 646-655, ISSN 2452-3216
Editore: Elsevier
DOI: 10.1016/j.prostr.2022.05.073

Influence of printing parameters on the eligibility of plane-strain fracture toughness results for PLA polymer

Autori: Milovanović, A., Golubović, Z., Trajković, I., Sedmak, A., Milosević, M., Valean, E., Marsavina, L.
Pubblicato in: Procedia Structural Integrity, Numero 41, 2022, Pagina/e 290-297, ISSN 2452-3216
Editore: Elsevier
DOI: 10.1016/j.prostr.2022.05.034

Mixed modes crack paths in SCB specimens obtained via SLS

Autori: Marsavina, L., Stoia, D. I., Linul, E.
Pubblicato in: Procedia Structural Integrity, Numero 39, 2022, Pagina/e 801-807, ISSN 2452-3216
Editore: Elsevier
DOI: 10.1016/j.prostr.2022.03.153

On Mode I crack mechanism in the puncturing of soft tissues.

Autori: Spagnoli A., Brighenti R. , Alberini R., Cosma M.P., Montanari M., Terzano M.
Pubblicato in: Procedia Structural Integrity, Numero 41, 2022, Pagina/e 656-663, ISSN 2452-3216
Editore: Elsevier B.V.
DOI: 10.1016/j.prostr.2022.05.074

Bending behavior of AM50 Magnesium alloy under static and dynamic loading

Autori: Sergiu-Valentin Galatanu, Milena Scano, Daniel Pietras, Liviu-Daniel Pirvulescu, Maria Cristina Porcu, Liviu Marsavina, Tomasz Sadowski
Pubblicato in: Procedia Structural Integrity, Numero 26, 2020, Pagina/e 269-276, ISSN 2452-3216
Editore: Elsevier BV
DOI: 10.1016/j.prostr.2020.06.034

Computational mechanical modeling of human skin for the simulation of reconstructive surgery procedures

Autori: Alberini R., Spagnoli A., Terzano M., Raposio E.
Pubblicato in: Procedia Structural Integrity, Numero 33, 2021, Pagina/e 556-563, ISSN 2452-3216
Editore: Elsevier B.V.
DOI: 10.1016/j.prostr.2021.10.061

Numerical and experimental study for FDM printed specimens from PLA under IZOD impact tests

Autori: Cosmin Florin Popa; Tamas Krausz; Sergiu-Valentin Galatanu; Emanoil Linul; Liviu Marsavina
Pubblicato in: Materials Today: Proceedings, Numero Volume 78, Part 2, 2023, Pagina/e 326-330, ISSN 2214-7853
Editore: Elsevier
DOI: 10.1016/j.matpr.2022.11.501

The effect of crack insertion for FDM printed PLA materials on Mode I and Mode II fracture toughness

Autori: Cristina Vălean, Liviu Marșavina, Mihai Mărghitaș, Emanoil Linul, Javad Razavi, Filippo Berto, Roberto Brighenti
Pubblicato in: Procedia Structural Integrity, Numero 28, 2020, Pagina/e 1134-1139, ISSN 2452-3216
Editore: Elsevier BV
DOI: 10.1016/j.prostr.2020.11.128

È in corso la ricerca di dati su OpenAIRE...

Si è verificato un errore durante la ricerca dei dati su OpenAIRE

Nessun risultato disponibile