Eastern European twinning on Structural Integrity and Reliability of Advanced Materials obtained through additive Manufacturing

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Website development

Website M3 The activities will be continuously updated with checkpoints every 6 months

E-newsletter

One newsletter will be published at M6 and then every six months to inform interested stakeholders of project main results innovation and benefits M6

1st WP2 workshops' book of abstract and PPT presentation

The workshops book of abstracts will be made available in electronic format A PPT presentations of the workshop will be delivered M24

1st WP1 workshops’ book of abstract and PPT presentation

The 1st workshops book of abstracts will be made available in electronic format A PPT presentation of the workshop will be also delivered M12

Video making for You Tube channel

Project videos for You Tube channel to be produced within the end of the project M36

2nd WP1 workshops' book of abstract and PPT presentation

The 2nd workshops book of abstracts and a PPT presentation M28

PEDR

PEDR M6 The first version of the PEDR will be produced as a specific deliverable at the beginning of the project The PEDR will contain information on communication activities eg visual identity press release public engagement activities summaries of annual workshops and networking events together with the dissemination ie scientific papers poster and oral communication in conference and congresses etc and exploitation measures implemented during the project The PEDR will be updated in the interim and final report for EU

Publicaciones

Crack path direction in plane-strain fracture toughness assessment tests of quasi-brittle PLA polymer and ductile PLA-X composite

Autores: Milovanović, A., Milosević, M., Trajković, I., Sedmak, A., Razavi, M.J., Berto, F
Publicado en: Procedia Structural Integrity, Edición 42, 2022, Página(s) 1376-1381, ISSN 2452-3216
Editor: Elsevier B.V.
DOI: 10.1016/j.prostr.2022.12.175

The effect of process parameters on mechanical characteristics of specimens obtained via DLP additive manufacturing technology

Autores: Roberto Brighenti; Liviu Marsavina; Mihai P. Marghitas; Matteo Montanari; Andrea Spagnoli; Farzad Tatar
Publicado en: Materials Today: Proceedings, Edición Volume 78, Part 2, 2023, Página(s) 331-336, ISSN 2214-7853
Editor: Elsevier
DOI: 10.1016/j.matpr.2023.01.092

Side-groove effect on fracture mechanical fatigue testing of PLA material

Autores: Milovanović, A., Poduska, J., Travniček, L., Nahlik, L., Sedmak, A., Milosević, M., Berto, F.
Publicado en: Procedia Structural Integrity, Edición 42, 2022, Página(s) 847-856, ISSN 2452-3216
Editor: Elsevier B.V.
DOI: 10.1016/j.prostr.2022.12.107

Effect of manufacturing parameters on tensile properties of FDM printed specimens

Autores: Cristina Vălean, Liviu Marșavina, Mihai Mărghitaș, Emanoil Linul, Javad Razavi, Filippo Berto
Publicado en: Procedia Structural Integrity, Edición 26, 2020, Página(s) 313-320, ISSN 2452-3216
Editor: Elsevier BV
DOI: 10.1016/j.prostr.2020.06.040

Comparative analysis of printing parameters effect on mechanical properties of natural PLA and advanced PLA-X material

Autores: Aleksa Milovanović; Aleksandar Sedmak; Aleksandar Grbović; Zorana Golubović; Goran Mladenovic; Katarina Čolić; Miloš Milošević
Publicado en: Procedia Structural Integrity, Edición 28, 2020, Página(s) 1963-1968, ISSN 2452-3216
Editor: Elsevier
DOI: 10.1016/j.prostr.2020.11.019

On The Fracture Toughness Of PPS And PPA Reinforced With Glass Fiber

Autores: Isaincu, A., Micota, D., & Marşavina, L.
Publicado en: Procedia Structural Integrity, Edición 41, 2022, Página(s) 646-655, ISSN 2452-3216
Editor: Elsevier
DOI: 10.1016/j.prostr.2022.05.073

Influence of printing parameters on the eligibility of plane-strain fracture toughness results for PLA polymer

Autores: Milovanović, A., Golubović, Z., Trajković, I., Sedmak, A., Milosević, M., Valean, E., Marsavina, L.
Publicado en: Procedia Structural Integrity, Edición 41, 2022, Página(s) 290-297, ISSN 2452-3216
Editor: Elsevier
DOI: 10.1016/j.prostr.2022.05.034

Mixed modes crack paths in SCB specimens obtained via SLS

Autores: Marsavina, L., Stoia, D. I., Linul, E.
Publicado en: Procedia Structural Integrity, Edición 39, 2022, Página(s) 801-807, ISSN 2452-3216
Editor: Elsevier
DOI: 10.1016/j.prostr.2022.03.153

On Mode I crack mechanism in the puncturing of soft tissues.

Autores: Spagnoli A., Brighenti R. , Alberini R., Cosma M.P., Montanari M., Terzano M.
Publicado en: Procedia Structural Integrity, Edición 41, 2022, Página(s) 656-663, ISSN 2452-3216
Editor: Elsevier B.V.
DOI: 10.1016/j.prostr.2022.05.074

Bending behavior of AM50 Magnesium alloy under static and dynamic loading

Autores: Sergiu-Valentin Galatanu, Milena Scano, Daniel Pietras, Liviu-Daniel Pirvulescu, Maria Cristina Porcu, Liviu Marsavina, Tomasz Sadowski
Publicado en: Procedia Structural Integrity, Edición 26, 2020, Página(s) 269-276, ISSN 2452-3216
Editor: Elsevier BV
DOI: 10.1016/j.prostr.2020.06.034

Computational mechanical modeling of human skin for the simulation of reconstructive surgery procedures

Autores: Alberini R., Spagnoli A., Terzano M., Raposio E.
Publicado en: Procedia Structural Integrity, Edición 33, 2021, Página(s) 556-563, ISSN 2452-3216
Editor: Elsevier B.V.
DOI: 10.1016/j.prostr.2021.10.061

Numerical and experimental study for FDM printed specimens from PLA under IZOD impact tests

Autores: Cosmin Florin Popa; Tamas Krausz; Sergiu-Valentin Galatanu; Emanoil Linul; Liviu Marsavina
Publicado en: Materials Today: Proceedings, Edición Volume 78, Part 2, 2023, Página(s) 326-330, ISSN 2214-7853
Editor: Elsevier
DOI: 10.1016/j.matpr.2022.11.501

The effect of crack insertion for FDM printed PLA materials on Mode I and Mode II fracture toughness

Autores: Cristina Vălean, Liviu Marșavina, Mihai Mărghitaș, Emanoil Linul, Javad Razavi, Filippo Berto, Roberto Brighenti
Publicado en: Procedia Structural Integrity, Edición 28, 2020, Página(s) 1134-1139, ISSN 2452-3216
Editor: Elsevier BV
DOI: 10.1016/j.prostr.2020.11.128

Mode I Fracture Toughness of Polyamide and Alumide Samples obtained by Selective Laser Sintering Additive Process

Autores: Dan Ioan Stoia, Liviu Marsavina, Emanoil Linul
Publicado en: Polymers, Edición 12/3, 2020, Página(s) 640, ISSN 2073-4360
Editor: MDPI Open Access Publishing
DOI: 10.3390/polym12030640

Laser-based additively manufactured polymers: a review on processes and mechanical models

Autores: Roberto Brighenti, Mattia Pancrazio Cosma, Liviu Marsavina, Andrea Spagnoli, Michele Terzano
Publicado en: Journal of Materials Science, Edición 56/2, 2021, Página(s) 961-998, ISSN 0022-2461
Editor: Kluwer Academic Publishers
DOI: 10.1007/s10853-020-05254-6

Novel method for measurement of pipeline materials fracture resistance-examination on selective laser sintered cylindrical specimens

Autores: Trajkovic, I., Milosevic, M., Travica, M., Rakin, M., Mladenovic, G., Kudrjavceva, L., Medo, B.
Publicado en: Science of Sintering, Edición 54 (3), 2022, Página(s) 373-386, ISSN 0350-820X
Editor: Plenum Publishers
DOI: 10.2298/sos2203373t

The effect of time on mechanical properties of biocompatible photopolymer resins used for fabrication of clear dental aligners

Autores: Milovanović, A., Sedmak, A., Golubović, Z., Mihajlović, K. Z., Zurkić, A., Trajković, I., & Milosević, M.
Publicado en: Journal of the Mechanical Behavior of Biomedical Materials, Edición 119, 104494, 2021, ISSN 1751-6161
Editor: Elsevier BV
DOI: 10.1016/j.jmbbm.2021.104494

Mechanical characterization of additively manufactured photopolymerized polymers

Autores: Brighenti R., Marsavina L., Marghitas M.P., Cosma M.P., Montanari M.
Publicado en: Mechanics of Advanced Materials and Structures, Edición 30 (9), 2023, ISSN 1537-6494
Editor: Taylor & Francis
DOI: 10.1080/15376494.2022.2045655

Smart Polymers for Advanced Applications: A Mechanical Perspective Review

Autores: Roberto Brighenti; Ying Li; Franck J. Vernerey
Publicado en: Frontiers in Materials, Edición 7(196), 2020, Página(s) 1-18, ISSN 2296-8016
Editor: Frontiers Media SA
DOI: 10.3389/fmats.2020.00196

Multiphysics modelling of the mechanical properties in polymers obtained via photo-induced polymerization

Autores: Roberto Brighenti, Mattia Pancrazio Cosma, Liviu Marsavina, Andrea Spagnoli & Michele Terzano
Publicado en: The International Journal of Advanced Manufacturing Technology, Edición 117, 2021, Página(s) 481–499, ISSN 0268-3768
Editor: Springer Verlag
DOI: 10.1007/s00170-021-07273-2

Mechanics and physics of the light-driven response of hydrogels

Autores: R. Brighenti, M.P. Cosma, N. Cohen
Publicado en: Mechanics Research Communications, Edición 129, 2023, Página(s) 104077, ISSN 0093-6413
Editor: Pergamon Press
DOI: 10.1016/j.mechrescom.2023.104077

Mode I critical energy release rate of additively manufactured polyamide samples

Autores: Dan Ioan Stoia, Liviu Marsavina, Emanoil Linul
Publicado en: Theoretical and Applied Fracture Mechanics, Edición 114, 2021, Página(s) 102968, ISSN 0167-8442
Editor: Elsevier BV
DOI: 10.1016/j.tafmec.2021.102968

Influence of anisotropy on the cold bending of S600MC sheet metal

Autores: Ailinei, I. I., Galatanu, S. V., & Marsavina, L.
Publicado en: Engineering Failure Analysis, Edición 137; 106206, 2022, ISSN 1873-1961
Editor: Elsevier
DOI: 10.1016/j.engfailanal.2022.106206

Mode I and II fracture toughness investigation of Laser-Sintered Polyamide

Autores: Emanoil Linul, Liviu Marsavina, Dan Ioan Stoia
Publicado en: Theoretical and Applied Fracture Mechanics, Edición 106, 2020, Página(s) 102497, ISSN 0167-8442
Editor: Elsevier BV
DOI: 10.1016/j.tafmec.2020.102497

Charpy impact properties and numerical modeling of polycarbonate composites

Autores: Krausz, T., Ailinei, I. I., Galatanu, S. V., Marsavina, L.
Publicado en: Material Design and Processing Communications,, Edición 3(4), 2021, Página(s) e260, ISSN 2577-6576
Editor: John Wiley & Sons Ltd
DOI: 10.1002/mdp2.260

Effect of the manufacturing parameters on the tensile and fracture properties of FDM 3D-printed PLA specimens

Autores: L. Marșavina, C. Vălean, M. Mărghitaș, E. Linul, S. M. J. Razavi, F. Berto, R. Brighenti
Publicado en: Engineering Fracture Mechanics, Edición 274, 2022, Página(s) 108766, ISSN 0013-7944
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.engfracmech.2022.108766

Smart actuation of liquid crystal elastomer elements: cross-link density-controlled response

Autores: Brighenti R. , Cosma M.P.
Publicado en: Smart Materials and Structures, Edición 31(1), 015012, 2022, ISSN 1361-665X
Editor: IOPscience
DOI: 10.1088/1361-665x/ac34bf

Influence of the Printing Angle and Load Direction on Flexure Strength in 3D Printed Materials for Provisional Dental Restorations

Autores: Paula Derban, Romeo Negrea, Mihai Rominu, Liviu Marsavina
Publicado en: Materials, Edición 14/12, 2021, Página(s) 3376, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma14123376

Optimisation of the Heterogeneous Joining Process of AlMg3 and X2CrNiMo17-12-2 Alloy by FSW Method

Autores: A. Feier, I. Both, E. Petzek.
Publicado en: Materials, Edición 16(7), 2023, Página(s) 2750, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma16072750

Cyclic behaviour and microstructural evolution of metastable austenitic stainless steel 304 L produced by laser powder bed fusion

Autores: Smid, M., Koutny, D., Neumannova, K., Chlup, Z., Nahlik, L., & Jambor, M.
Publicado en: Additive Manufacturing, Edición 68, 2023, Página(s) 103503, ISSN 2214-8604
Editor: Elsevier BV
DOI: 10.1016/j.addma.2023.103503

Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication

Autores: Benedetti, M., Du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, S.M.J., & Berto, F.
Publicado en: Materials Science and Engineering: R: Reports, Edición 144, 100606, 2021, ISSN 0927-796X
Editor: Elsevier BV
DOI: 10.1016/j.mser.2021.100606

Puncturing of soft tissues: experimental and fracture mechanics-based study

Autores: A. Spagnoli, R. Brighenti, M. Montanari, M. Terzano.
Publicado en: Soft Matter, Edición 19, 2023, Página(s) 3629-3639, ISSN 1744-6848
Editor: Royal Society of Chemistry
DOI: 10.1039/d3sm00011g

Lifetime prediction in medium-cycle fatigue regime of notched specimens

Autores: R. Negru, D.A. Șerban, L. Marșavina, A. Magda
Publicado en: Theoretical and Applied Fracture Mechanics, Edición 84, 2016, Página(s) 140-148, ISSN 0167-8442
Editor: Elsevier BV
DOI: 10.1016/j.tafmec.2016.03.006

Experimental validation of micromechanical models for brittle aluminium alloy foam

Autores: Liviu Marsavina, Jaroslav Kováčik, Emanoil Linul
Publicado en: Theoretical and Applied Fracture Mechanics, Edición 83, 2016, Página(s) 11-18, ISSN 0167-8442
Editor: Elsevier BV
DOI: 10.1016/j.tafmec.2015.12.020

Evaluation of the mechanical and morphological properties of long fibre reinforced polyurethane rigid foams

Autores: Dan-Andrei Şerban, Oliver Weissenborn, Sirko Geller, Liviu Marşavina, Maik Gude
Publicado en: Polymer Testing, Edición 49, 2016, Página(s) 121-127, ISSN 0142-9418
Editor: Elsevier BV
DOI: 10.1016/j.polymertesting.2015.11.007

Experimental and numerical crack paths in PUR foams

Autores: Liviu Marsavina, Dan M. Constantinescu, Emanoil Linul, Florin A. Stuparu, Dragos A. Apostol
Publicado en: Engineering Fracture Mechanics, Edición 167, 2016, Página(s) 68-83, ISSN 0013-7944
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.engfracmech.2016.03.043

Low-cycle fatigue behaviour of ductile closed-cell aluminium alloy foams

Autores: E. Linul, D. A. Şerban, L. Marsavina, J. Kovacik
Publicado en: Fatigue & Fracture of Engineering Materials & Structures, Edición 40/4, 2017, Página(s) 597-604, ISSN 8756-758X
Editor: Blackwell Publishing Inc.
DOI: 10.1111/ffe.12535

Assessment of collapse diagrams of rigid polyurethane foams under dynamic loading conditions

Autores: Emanoil Linul, Dan Andrei Şerban, Liviu Marsavina, Tomasz Sadowski
Publicado en: Archives of Civil and Mechanical Engineering, Edición 17/3, 2017, Página(s) 457-466, ISSN 1644-9665
Editor: Elsevier Urban/Partners Sp. z.o.o.
DOI: 10.1016/j.acme.2016.12.009

DYNAMIC AND QUASI-STATIC COMPRESSION TESTS OF CLOSED-CELL ALUMINIUM ALLOY FOAMS

Autores: Emanoil LINUL, Liviu MARSAVINA, Jaroslav KOVACIK, Tomasz SADOWSKI
Publicado en: PROCEEDINGS OF THE ROMANIAN ACADEMY, Series A, Edición 18/4, 2017, Página(s) 361-369, ISSN 1454-9069
Editor: Academia Romana

Collapse mechanisms of metal foam matrix composites under static and dynamic loading conditions

Autores: Emanoil Linul, Liviu Marsavina, Jaroslav Kováčik
Publicado en: Materials Science and Engineering: A, Edición 690, 2017, Página(s) 214-224, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2017.03.009

An engineering approach to predict mixed mode fracture of PUR foams based on ASED and micromechanical modelling

Autores: Liviu Marsavina, Filippo Berto, Radu Negru, Dan Andrei Serban, Emanoil Linul
Publicado en: Theoretical and Applied Fracture Mechanics, Edición 91, 2017, Página(s) 148-154, ISSN 0167-8442
Editor: Elsevier BV
DOI: 10.1016/j.tafmec.2017.06.008

The temperature effect on the axial quasi-static compressive behavior of ex-situ aluminum foam-filled tubes

Autores: Emanoil Linul, Nima Movahedi, Liviu Marsavina
Publicado en: Composite Structures, Edición 180, 2017, Página(s) 709-722, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2017.08.034

Influence of Cell Topology on Mode I Fracture Toughness of Cellular Structures

Autores: E. Linul, D. A. Serban, L. Marsavina
Publicado en: Physical Mesomechanics, Edición 21/2, 2018, Página(s) 178-186, ISSN 1029-9599
Editor: Elsevier BV
DOI: 10.1134/s1029959918020121

The temperature and anisotropy effect on compressive behavior of cylindrical closed-cell aluminum-alloy foams

Autores: Emanoil Linul, Nima Movahedi, Liviu Marsavina
Publicado en: Journal of Alloys and Compounds, Edición 740, 2018, Página(s) 1172-1179, ISSN 0925-8388
Editor: Elsevier BV
DOI: 10.1016/j.jallcom.2018.01.102

Notch effect assessment in a PUR material using a ring shaped specimen

Autores: R. Negru, D.A. Serban, C. Pop, L. Marsavina
Publicado en: Theoretical and Applied Fracture Mechanics, Edición 97, 2018, Página(s) 500-506, ISSN 0167-8442
Editor: Elsevier BV
DOI: 10.1016/j.tafmec.2018.01.016

Experimental and theoretical fracture toughness investigation of PUR foams under mixed mode I+III loading

Autores: M.R.M. Aliha, E. Linul, A. Bahmani, L. Marsavina
Publicado en: Polymer Testing, Edición 67, 2018, Página(s) 75-83, ISSN 0142-9418
Editor: Elsevier BV
DOI: 10.1016/j.polymertesting.2018.02.015

On the Lateral Compressive Behavior of Empty and Ex-Situ Aluminum Foam-Filled Tubes at High Temperature

Autores: Emanoil Linul, Nima Movahedi, Liviu Marsavina
Publicado en: Materials, Edición 11/4, 2018, Página(s) 554, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma11040554

Poisson’s Ratio of Closed-Cell Aluminium Foams

Autores: Jaroslav Kováčik, Liviu Marsavina, Emanoil Linul
Publicado en: Materials, Edición 11/10, 2018, Página(s) 1904, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma11101904

The effects of layers orientation on impact energy evaluation of FDM printed specimens

Autores: Ailinei, I. I., Galatanu, S. V., Marsavina, L
Publicado en: Material Design and Processing Communications, Edición 3(6), 2021, Página(s) e267, ISSN 2577-6576
Editor: John Wiley & Sons Ltd
DOI: 10.1002/mdp2.267

Crack‐tip blunting and its implications on fracture of soft materials

Autores: Spagnoli, R. Brighenti, M. Montanari, M. Terzano
Publicado en: Fatigue and Fracture of Engineering Materials & Structures, Edición 46, 2023, Página(s) 1627-1637, ISSN 1460-2695
Editor: John Wiley & Sons Ltd
DOI: 10.1111/ffe.13951

Impact properties of laser sintered polyamide, according to building orientation

Autores: Stoia, D. I., Galatanu, S. V., Marsavina, L.
Publicado en: Journal of Mechanical Science and Technology, Edición 37, 2023, Página(s) 1119–1123, ISSN 1738-494X
Editor: Korean Society of Mechanical Engineers
DOI: 10.1007/s12206-022-2108-0

Mixed-mode I/II fracture properties of selectively laser sintered polyamide

Autores: Stoia, D. I., Linul, E., & Marsavina, L.
Publicado en: Theoretical and Applied Fracture Mechanics, Edición 121, 2022, Página(s) 103527, ISSN 1872-7638
Editor: Elsevier
DOI: 10.1016/j.tafmec.2022.103527

Fracture toughness of rigid polymeric foams: A review

Autores: Liviu Marșavina, Emanoil Linul
Publicado en: Fatigue & Fracture of Engineering Materials & Structures, Edición 43/11, 2020, Página(s) 2483-2514, ISSN 8756-758X
Editor: Blackwell Publishing Inc.
DOI: 10.1111/ffe.13327

Photopolymerized AM materials: modelling of the printing process, mechanical behavior and sensitivity analysis

Autores: Mattia Pancrazio Cosma; Roberto Brighenti
Publicado en: Material Design and Processing Communications, Edición 3(6), 2021, Página(s) e225, ISSN 2577-6576
Editor: John Wiley & Sons Ltd
DOI: 10.1002/mdp2.225

Failure Locus of an ABS-Based Compound Manufactured through Photopolymerization.

Autores: Dan-Andrei Șerban; Alexandru Viorel Coșa; George Belgiu; Radu Negru
Publicado en: Polymers, Edición Volume 14; Edición 18; Article 3822, 2022, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym14183822

Dimensional accuracy of parts obtained by SLS technology

Autores: Jevtić, I., Mladenović, G., Milosević, M., Milovanović, A., Trajković, I., Travica, M.
Publicado en: Structural Integrity and Life, Edición 22(3), 2022, Página(s) 288–292, ISSN 1451-3749
Editor: Society for Structural Integrity and Life

Controlled morphing of architected liquid crystal elastomer elements: modeling and simulations

Autores: Cosma M.P., Brighenti R.
Publicado en: Mechanics Research Communications, Edición 121, 2022, Página(s) 103858, ISSN 0093-6413
Editor: Pergamon Press
DOI: 10.1016/j.mechrescom.2022.103858

Multiphysics modelling of light-actuated liquid crystal elastomers

Autores: Brighenti, R., Cosma, M.P.
Publicado en: Proceedings of the Royal Society A, Edición 479 (2269), 2023, ISSN 1471-2946
Editor: The Royal Society
DOI: 10.1098/rspa.2022.0417

Experimental testing of two short‐fiber reinforced composites: PPA‐GF33 and PPS‐GF40

Autores: Micota, D., Isaincu, A., Marşavina, L.
Publicado en: Material Design and Processing Communications,, Edición 3(6), 2021, Página(s) e264, ISSN 2577-6576
Editor: John Wiley & Sons Ltd
DOI: 10.1002/mdp2.264

Anomalous fatigue crack propagation behavior in near-threshold region of L-PBF prepared austenitic stainless steel

Autores: Jambor, M., Vojtek, T., Pokorny, P., Koutny, D., Nahlik, L., Hutař, P., Smid, M.
Publicado en: Materials Science and Engineering: A,, Edición 872, 2023, Página(s) 144982, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2023.144982

Tensile properties of Polypropylene additively manufactured by FDM

Autores: Milovanović, A., Golubović, Z., Babinsky, T., Sulak, I., Mitrović, A.
Publicado en: Structural Integrity and Life, Edición 22(3), 2022, Página(s) 305-308, ISSN 1451-3749
Editor: Society for Structural Integrity and Life

Fracture toughness in additive manufacturing by selective laser sintering: an overview

Autores: Marșavina, L., Stoia, D. I., & Emanoil, L.
Publicado en: Material Design and Processing Communications, Edición 3(6), 2021, Página(s) e254, ISSN 2577-6576
Editor: John Wiley & Sons Ltd
DOI: 10.1002/mdp2.254

Additively manufactured multi-morphology bone-like porous scaffolds: experiments and micro-computed tomography finite element modeling approaches

Autores: R. Noroozi, F. Tatar, M. Bodaghi, A. Zolfagharian, R. Brighenti, M. Amin Shamekhi, A.R. Ghamsari, A. Hadi
Publicado en: International Journal of Bioprinting, Edición 8(3), 2022, Página(s) 556, ISSN 2424-7723
Editor: Whioce Publishing
DOI: 10.18063/ijb.v8i3.556

Mechanical behavior of photopolymerized materials

Autores: Roberto Brighenti; Mattia Pancrazio Cosma
Publicado en: Journal of the Mechanics and Physics of Solids, Edición 153, 104456, 2021, ISSN 0022-5096
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.jmps.2021.104456

Buscando datos de OpenAIRE...

Resultado final

Publicaciones

Compartir esta página Compartir esta página en las redes sociales

Descargar Descargar el contenido de la página