Multi-scale Optimisation for Additive Manufacturing of fatigue resistant shock-absorbing MetaMaterials

Información del proyecto

MOAMMM

Identificador del acuerdo de subvención: 862015

DOI

10.3030/862015

Proyecto cerrado

Fecha de la firma de la CE 30 Agosto 2019

Fecha de inicio 1 Enero 2020

Fecha de finalización 30 Septiembre 2024

Financiado con arreglo a

• EXCELLENT SCIENCE - Future and Emerging Technologies (FET)

Coste total

€ 3 516 831,25

Aportación de la UE

€ 3 516 831,25

Coordinado por

UNIVERSITE DE LIEGE
Belgium

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Open Research Data Pilot (5)

µ-data base with aeging without process parameters

Updated µ-data base (D3.3) after three-year ageing of the polymer.

Set of homogenised results without process parameters

Homogenised responses of different loading performed on the different SVEs. Deliverable is under the form of data points corresponding to the loading curves. This deliverable is a subset of D4.2 which does not include the effect of the process parameters.

µ-data base without process parameters

Subset of D32 that can go public Database of microstructure cell geometry and material properties obtained by inferring parameters from both the model of the AM process T24 and the experimental characterisation T3132 without the effect of the process parameters

Surrogate model of the p.o.i. without the process parameters

Surrogate model of the macroscale property or interest (p.o.i.) trained using the stochastic FEM (D5.2) with the trained surrogate model of the meso-scale responses (D5.1) as random field input. The surrogate model is a subset of D6.1 which does not include the effect of the process parameters on the p.o.i. in order to go public.

Updated μ-data base without process parameters

Updated version of deliverable D3.3 with new experimental tests performed in Task 3.1 and Task 3.2. Depending on the results of the new experimental campaign and the final selection of the material systems, either EOS materials or the new Luvosint® materials, or both of them, will be included in this deliverable.

Other (8)

Cell design of lattice metamaterial

First cell definition of lattice metamaterial The deliverable is under the form of schematics

2-scale optimisation methodology

Implemented optimisation methodology of i) the process parameter and ii) geometrical metamaterial geometry parameters, using the p.o.i. surrogate model (D6.1); and of iii) the macro-scale dimensions

Trained mesoscale surrogate models

Trained mesoscale surrogate model using full-field homogenisation results of WP4 (D4.2). The deliverable is under the form of a stochastic model (e.g. a random fields generator).

Stochastic multiscale software

Implementation in cm3Libraires part of GMSH of a stochastic-finite elements method that use as input the mesoscale surrogate model (D5.1) as a random field. GMSH is an open source software (http://gmsh.info/)

Workshop

Organisation of a workshop gathering the different actors in the field, not only the project own community, but also i) commercial software developers, ii) end-users of the shock-absorbing applications, and iii) actors in AM.

Set of SVEs

Set of Stochastic Volume Elements SVEs defined by both their geometry and material properties to be handled in the form of stochastic voxelized microstructures

Cell design of bi-stable metamaterial

First cell definition of bistable metamaterial The deliverable is under the form of schematics

Homogenisation model of bulk porous material

Homogenisation model of thermoviscoelasticviscoplastic porous polymer matrices under large deformations and evolving porosity The deliverable is under the form of a code

Demonstrators, pilots, prototypes (2)

Printed bi-stable metamaterial

First printed bistable metamaterial in view of the microcharacterisation in T31 and T32

Printed lattice metamaterial

First printed lattice metamaterial in view of the microcharacterisation in T31 and T32

Documents, reports (1)

Publications

Compilation of publications:Two to three publications in international journals and the participation on three international conferences are foreseen per researcher working on the project. The journal and conferences will be related to the different areas targeted by the project: i) numerical methods; ii) additive manufacturing sciences; iii) advanced materials; iv) structural engineering; iv) UQ methods; v) biomechanics, etc. Co-supervised PhD theses will also be made public.

Websites, patent fillings, videos etc. (1)

Web-site & social media account

Project web-site with logo and social media accounts (one Facebook page and one twitter account) set up to promote the project results.

Publicaciones

Non-peer reviewed articles (1)

Toward stochastic multi-scale methods in continuum solid mechanics

Autores: L. Noels
Publicado en: Advances in Applied Mechanics, Edición 55, 2022, ISSN 0065-2156
Editor: Academic Press
DOI: 10.1016/bs.aams.2022.03.001

Peer reviewed articles (18)

Adaptation and validation of FFT methods for homogenization of lattice based materials

Autores: S. Lucarini, L. Cobian, A. Voitus, J. Segurado
Publicado en: Computer Methods in Applied Mechanics and Engineering, Edición 388, 2022, Página(s) 114223, ISSN 0045-7825
Editor: Elsevier BV
DOI: 10.1016/j.cma.2021.114223

Design method for individualised 3D printed lattice shoe midsoles

Autores: Anna Hössinger-Kalteis, Michael Lackner, Zoltán Major, Fatma Karayagiz, Hans Nopper, Thomas Lück
Publicado en: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2025, ISSN 1464-4207
Editor: Professional Engineering Publishing Ltd.
DOI: 10.1177/14644207241291232

Recurrent Neural Networks (RNNs) with dimensionality reduction and break down in computational mechanics; application to multi-scale localization step

Autores: Ling Wu, Ludovic Noels
Publicado en: Computer Methods in Applied Mechanics and Engineering, Edición 390, 2022, Página(s) 114476, ISSN 0045-7825
Editor: Elsevier BV
DOI: 10.1016/j.cma.2021.114476

Bayesian inference of high-dimensional finite-strain visco-elastic-visco-plastic model parameters for additive manufactured polymers and neural network based material parameters generator

Autores: Ling Wu, Cyrielle Anglade, Lucia Cobian, Miguel Monclus, Javier Segurado, Fatma Karayagiz, Ubiratan Freitas, Ludovic Noels.
Publicado en: International Journal of Solids and Structures, Edición 283, 2023, Página(s) 112470, ISSN 0020-7683
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.ijsolstr.2023.112470

Viscoelastic-viscoplastic polymer composites: Development and evaluation of two very dissimilar mean-field homogenization models

Autores: Mohame Haddad, IssamDoghri, OlivierPierard
Publicado en: International Journal of Solids and Structures, Edición 236-237, 2022, Página(s) 111354, ISSN 0020-7683
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.ijsolstr.2021.111354

FFT based approaches in micromechanics: fundamentals, methods and applications

Autores: S Lucarini, M V Upadhyay and J Segurado
Publicado en: Modelling and Simulation in Materials Science and Engineering, Edición 30, 2022, Página(s) 023002, ISSN 0965-0393
Editor: Institute of Physics Publishing
DOI: 10.1088/1361-651x/ac34e1

A data-driven reduced-order surrogate model for entire elastoplastic simulations applied to representative volume elements

Autores: Soumianarayanan Vijayaraghavan, Ling Wu, Ludovic Noels, Stéphane P. A. Bordas, Sundar Natarajan & Lars A. A. Beex
Publicado en: Scientific Reports, Edición 13, 2023, Página(s) 12781, ISSN 2045-2322
Editor: Nature Publishing Group
DOI: 10.1038/s41598-023-38104-x

Particle size effects in ductile composites: An FFT homogenization study

Autores: Marco Magri, Laurent Adam, Javier Segurado
Publicado en: Journal of the Mechanics and Physics of Solids, Edición 160, 2022, Página(s) 104759, ISSN 0022-5096
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.jmps.2021.104759

A computationally efficient hybrid formulation for viscoelastic–viscoplastic polymer solids and structures under large numbers of loading cycles

Autores: Darith Anthony Hun, Mohamed Haddad, Issam Doghri, Georgios Tsilimidos, Michael Lackner, Zoltan Major, Leonhard Doppelbauer, Sara Haouala
Publicado en: International Journal of Solids and Structures, Edición 314, 2025, Página(s) 113290, ISSN 0020-7683
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.ijsolstr.2025.113290

An FFT framework for simulating non-local ductile failure in heterogeneous materials

Autores: M. Magri, S. Lucarini, G. Lemoine, L. Adam, J. Segurado
Publicado en: Computer Methods in Applied Mechanics and Engineering, Edición 380, 2021, Página(s) 113759, ISSN 0045-7825
Editor: Elsevier BV
DOI: 10.1016/j.cma.2021.113759

Second-order computational homogenisation enhanced with non-uniform body forces for non-linear cellular materials and metamaterials

Autores: Ling Wu, Mohib Mustafa, Javier Segurado, Ludovic Noels
Publicado en: Computer Methods in Applied Mechanics and Engineering, Edición 407, 2023, Página(s) 115931, ISSN 0045-7825
Editor: Elsevier BV
DOI: 10.1016/j.cma.2023.115931

A recurrent neural network-accelerated multi-scale model for elasto-plastic heterogeneous materials subjected to random cyclic and non-proportional loading paths

Autores: Ling Wu, Van Dung Nguyen, Nanda Gopala Kilingar, Ludovic Noels
Publicado en: Computer Methods in Applied Mechanics and Engineering, Edición 369, 2020, Página(s) 113234, ISSN 0045-7825
Editor: Elsevier BV
DOI: 10.1016/j.cma.2020.113234

A consistent finite-strain thermomechanical quasi-nonlinear-viscoelastic viscoplastic constitutive model for thermoplastic polymers

Autores: Ujwal Kishore Jinaga, Kepa Zulueta, Aizeti Burgoa, Lucia Cobian, Ubiratan Freitas, Michael Lackner, Zoltan Major, Ludovic Noels
Publicado en: International Journal of Solids and Structures, Edición 321, 2025, Página(s) 113517, ISSN 0020-7683
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.ijsolstr.2025.113517

Micromechanical characterization of the material response in a PA12-SLS fabricated lattice structure and its correlation with bulk behavior

Autores: L. Cobian, M. Rueda-Ruiz, J.P. Fernandez-Blazquez, V. Martinez, F. Galvez, F. Karayagiz, T. Lück, J. Segurado, M.A. Monclus
Publicado en: Polymer Testing, Edición 110, 2022, Página(s) 107556, ISSN 0142-9418
Editor: Elsevier BV
DOI: 10.1016/j.polymertesting.2022.107556

An implicit FFT-based method for wave propagation in elasticheterogeneous media

Autores: R. Sancho, V. Rey-de-Pedraza, P. Lafourcade, R.A. Lebensohn, J. Segurado
Publicado en: Computer Methods in Applied Mechanics and Engineering, Edición 404, 2023, Página(s) 115772, ISSN 0045-7825
Editor: Elsevier BV
DOI: 10.1016/j.cma.2022.115772

Sensitivity study of multi-stable metamaterials applied in helmet liners

Autores: A. Hössinger-Kalteis, EJ. Pitz, Z. Major
Publicado en: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications., Edición 238, 2024, Página(s) 890-900, ISSN 1464-4207
Editor: Professional Engineering Publishing Ltd.
DOI: 10.1177/14644207231203482

Modeling and simulation of viscoelastic solids under large numbers of loading cycles

Autores: Darith Anthony Hun, Mohamed Haddad & Issam Doghri
Publicado en: Mechanics of Advanced Materials and Structures, 2022, ISSN 1537-6494
Editor: Taylor & Francis
DOI: 10.1080/15376494.2022.2037170

Effect of sample dimensions on the stiffness of PA12 Lattice materials fabricated using Powder Bed Fusion

Autores: L. Cobian, E. Maire, J. Adrien, U. Freitas, J.P. Fernández-Blázquez, M.A. Monclús, J. Segurado
Publicado en: Additive Manufacturing, Edición 93, 2024, Página(s) 104382, ISSN 2214-8604
Editor: Elsevier BV
DOI: 10.1016/j.addma.2024.104382

Conference proceedings (1)

Characterization of the Fatigue Behavior of SLS Thermoplastics

Autores: Zoltan Major, Michael Lackner, Anna Hössinger-Kalteis and Thomas Lück
Publicado en: Procedia Structural Integrity, Edición 34, 2021, Página(s) 191-198, ISSN 2452-3216
Editor: Elsevier B.V.
DOI: 10.1016/j.prostr.2021.12.028