Development of a multipurpose test rig and validation of an innovative rotorcraft vertical tail

Información del proyecto

TAILTEST

Identificador del acuerdo de subvención: 865123

DOI

10.3030/865123

Proyecto cerrado

Fecha de la firma de la CE 19 Septiembre 2019

Fecha de inicio 1 Noviembre 2019

Fecha de finalización 31 Diciembre 2023

Financiado con arreglo a

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Coste total

€ 696 750,00

Aportación de la UE

€ 696 750,00

Coordinado por

VZLU AEROSPACE AS
Czechia

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (1)

Dissemination, communication and exploitation plan

D6.1 will comprise a detailed description of the dissemination, communication and exploitation plans for the project activities and results.

Open Research Data Pilot (1)

Data Management Plan

scientific paper and open data - opt-in

Publicaciones

Other (9)

Development of a numerical methodology for the analysis of the post-buckling and failure behaviour of composite stiffened panels considering the effect of initial debonding

Autores: Harry O. Psihoyos, Konstantinos T. Fotopoulos, George N. Lampeas, Jan Waleson & Michel Brethouver
Publicado en: ICEAF VII, Edición 2023, 2023
Editor: ICEAF VII - 7th International Conference of Engineering Against Failure

Analysis of Compressive Behaviour of Pristine and Cracked 5-Stringer Butt-Joint Panels Made from Carbon Fibre Reinforced Thermoplastic Polymer

Autores: Šedek, J. Vlach, R. Růžek
Publicado en: ECF 23, Edición 2022, 2022
Editor: ECF 23 - European Conference on Fracture

Development and validation of a cohesive zone-based numerical methodology for delamination prediction in laminated composite structures

Autores: Konstantinos T. Fotopoulos, Harry O. Psihoyos and George N. Lampeas
Publicado en: ICEAF VI, Edición 2021, 2021
Editor: ICEAF VI - 6th International Conference of Engineering Against Failure

Development of a multipurpose test rig and validation of an innovative rotorcraft vertical tail

Autores: R. Růžek, M. Oberthor, R. Doubrava
Publicado en: EASN 12, Edición 2022, 2022
Editor: EASN 12 - 12th EASN International Conference on Innovation in Aviation and Space for Opening New Horizons

Simulation and experimental validation of crack arresting features in composite joints

Autores: Harry O. Psihoyos, Konstantinos T. Fotopoulos & George N. Lampeas
Publicado en: EASN 12, Edición 2022, 2022
Editor: EASN 12 - 12th EASN International Conference on Innovation in Aviation and Space for Opening New Horizons

Investigation of conduction welded thermoplastic composite joints in Mode-I and Mode-IIloading conditions

Autores: Konstantinos T. Fotopoulos, Stavros E. Valilis, George N. Lampeas & Bas H. A. H. Tijs
Publicado en: ICEAF VII, Edición 2023, 2023
Editor: ICEAF VII - 7th International Conference of Engineering Against Failure

Application of simulation for the design of experimental validation of new V-tail for tilt-rotor plane

Autores: Radek Doubrava, Jan Raška, Roman Růžek, Martin Oberthor, Václav Strnad
Publicado en: EASN 12, Edición 2022, 2022
Editor: EASN 12 - 12th EASN International Conference on Innovation in Aviation and Space for Opening New Horizons

Progressive failure analysis of laminated fiber reinforced composite materials

Autores: Harry O. Psihoyos, Konstantinos T. Fotopoulos and George N. Lampeas
Publicado en: ICEAF VI, Edición 2021, 2021
Editor: ICEAF VI - 6th International Conference of Engineering Against Failure

Experimental analysis of thermoplastic composite stiffened panel under compression

Autores: R. Růžek, A. Karkulín, J. Šedek
Publicado en: ICSM, Edición 2022, 2022
Editor: ICSM - INTERNATIONAL CONFERENCE ON STRENGTH OF MATERIALS

Peer reviewed articles (3)

Development and validation of a simulation methodology for composite joints with delamination arresting features

Autores: H.O. Psihoyos; K.T. Fotopoulos; G.N. Lampeas
Publicado en: Engineering Failure Analysis, Edición 137 (2022) 106418, 2021, Página(s) 106418, ISSN 0346-251X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.engfailanal.2022.106418

Analysis of Compressive Behaviour of Pristine and Cracked 5-Stringer Butt-Joint Panels Made from Carbon Fibre Reinforced Thermoplastic Polymer.

Autores: Šedek, J. Vlach, R. Růžek:
Publicado en: Procedia Structural Integrity, Edición 42, 2022, 2022, Página(s) 398-403, ISSN 2452-3216
Editor: Pp.398-403
DOI: 10.1016/j.prostr.2022.12.050

Experimental verification of PEKK stiffened panel under Compression.

Autores: Růžek, R., Karkulín, A., Mlch, I., Šedek, J.
Publicado en: Journal of Physics: Conference Series, Edición 2692 (2024) 012019, 2024, Página(s) 012 – 019, ISSN 1742-6596
Editor: IOP Publishing
DOI: 10.1088/1742-6596/2692/1/012019

Conference proceedings (2)

Development of a multipurpose test rig - TAILTEST

Autores: Oberthor Martin; Horák Václav; Růžek Roman
Publicado en: MATEC web of Coferences, Edición 4, 2021, Página(s) 349
Editor: MATEC web of Conferences
DOI: 10.1051/matecconf/202134904016

Development of a multipurpose test rig and validation of an innovative rotorcraft vertical tail

Autores: Horák, V.
Publicado en: MATEC Web Conf, Edición 349, 04016, 2021, 2021
Editor: MATEC Web Conf