Development of a multipurpose test rig and validation of an innovative rotorcraft vertical tail

Informazioni relative al progetto

TAILTEST

ID dell’accordo di sovvenzione: 865123

DOI

10.3030/865123

Progetto chiuso

Data della firma CE 19 Settembre 2019

Data di avvio 1 Novembre 2019

Data di completamento 31 Dicembre 2023

Finanziato da

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Costo totale

€ 696 750,00

Contributo UE

€ 696 750,00

Coordinato da

VZLU AEROSPACE AS
Czechia

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (1)

Dissemination, communication and exploitation plan

D6.1 will comprise a detailed description of the dissemination, communication and exploitation plans for the project activities and results.

Open Research Data Pilot (1)

Data Management Plan

scientific paper and open data - opt-in

Pubblicazioni

Other (9)

Development of a numerical methodology for the analysis of the post-buckling and failure behaviour of composite stiffened panels considering the effect of initial debonding

Autori: Harry O. Psihoyos, Konstantinos T. Fotopoulos, George N. Lampeas, Jan Waleson & Michel Brethouver
Pubblicato in: ICEAF VII, Numero 2023, 2023
Editore: ICEAF VII - 7th International Conference of Engineering Against Failure

Analysis of Compressive Behaviour of Pristine and Cracked 5-Stringer Butt-Joint Panels Made from Carbon Fibre Reinforced Thermoplastic Polymer

Autori: Šedek, J. Vlach, R. Růžek
Pubblicato in: ECF 23, Numero 2022, 2022
Editore: ECF 23 - European Conference on Fracture

Development and validation of a cohesive zone-based numerical methodology for delamination prediction in laminated composite structures

Autori: Konstantinos T. Fotopoulos, Harry O. Psihoyos and George N. Lampeas
Pubblicato in: ICEAF VI, Numero 2021, 2021
Editore: ICEAF VI - 6th International Conference of Engineering Against Failure

Development of a multipurpose test rig and validation of an innovative rotorcraft vertical tail

Autori: R. Růžek, M. Oberthor, R. Doubrava
Pubblicato in: EASN 12, Numero 2022, 2022
Editore: EASN 12 - 12th EASN International Conference on Innovation in Aviation and Space for Opening New Horizons

Simulation and experimental validation of crack arresting features in composite joints

Autori: Harry O. Psihoyos, Konstantinos T. Fotopoulos & George N. Lampeas
Pubblicato in: EASN 12, Numero 2022, 2022
Editore: EASN 12 - 12th EASN International Conference on Innovation in Aviation and Space for Opening New Horizons

Investigation of conduction welded thermoplastic composite joints in Mode-I and Mode-IIloading conditions

Autori: Konstantinos T. Fotopoulos, Stavros E. Valilis, George N. Lampeas & Bas H. A. H. Tijs
Pubblicato in: ICEAF VII, Numero 2023, 2023
Editore: ICEAF VII - 7th International Conference of Engineering Against Failure

Application of simulation for the design of experimental validation of new V-tail for tilt-rotor plane

Autori: Radek Doubrava, Jan Raška, Roman Růžek, Martin Oberthor, Václav Strnad
Pubblicato in: EASN 12, Numero 2022, 2022
Editore: EASN 12 - 12th EASN International Conference on Innovation in Aviation and Space for Opening New Horizons

Progressive failure analysis of laminated fiber reinforced composite materials

Autori: Harry O. Psihoyos, Konstantinos T. Fotopoulos and George N. Lampeas
Pubblicato in: ICEAF VI, Numero 2021, 2021
Editore: ICEAF VI - 6th International Conference of Engineering Against Failure

Experimental analysis of thermoplastic composite stiffened panel under compression

Autori: R. Růžek, A. Karkulín, J. Šedek
Pubblicato in: ICSM, Numero 2022, 2022
Editore: ICSM - INTERNATIONAL CONFERENCE ON STRENGTH OF MATERIALS

Peer reviewed articles (3)

Development and validation of a simulation methodology for composite joints with delamination arresting features

Autori: H.O. Psihoyos; K.T. Fotopoulos; G.N. Lampeas
Pubblicato in: Engineering Failure Analysis, Numero 137 (2022) 106418, 2021, Pagina/e 106418, ISSN 0346-251X
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.engfailanal.2022.106418

Analysis of Compressive Behaviour of Pristine and Cracked 5-Stringer Butt-Joint Panels Made from Carbon Fibre Reinforced Thermoplastic Polymer.

Autori: Šedek, J. Vlach, R. Růžek:
Pubblicato in: Procedia Structural Integrity, Numero 42, 2022, 2022, Pagina/e 398-403, ISSN 2452-3216
Editore: Pp.398-403
DOI: 10.1016/j.prostr.2022.12.050

Experimental verification of PEKK stiffened panel under Compression.

Autori: Růžek, R., Karkulín, A., Mlch, I., Šedek, J.
Pubblicato in: Journal of Physics: Conference Series, Numero 2692 (2024) 012019, 2024, Pagina/e 012 – 019, ISSN 1742-6596
Editore: IOP Publishing
DOI: 10.1088/1742-6596/2692/1/012019

Conference proceedings (2)

Development of a multipurpose test rig - TAILTEST

Autori: Oberthor Martin; Horák Václav; Růžek Roman
Pubblicato in: MATEC web of Coferences, Numero 4, 2021, Pagina/e 349
Editore: MATEC web of Conferences
DOI: 10.1051/matecconf/202134904016

Development of a multipurpose test rig and validation of an innovative rotorcraft vertical tail

Autori: Horák, V.
Pubblicato in: MATEC Web Conf, Numero 349, 04016, 2021, 2021
Editore: MATEC Web Conf