European Commission logo
English English
CORDIS - EU research results

All Solid-sTate Reliable BATtery for 2025


Certification specification roadmap

This reports is carried out in the framework of the task 74 to road map activity about the certification related to ASSC

Analysis of battery requirement for vehicle applications

This deliverable is obtained from the discussion done in the task 2.4. This deliverable gives the gives requirement in performances for differnt type of vehicles and will be integrated to the cost assesment and Life cycle analysis in WP7 .

Communication and dissemination plan , initial report

This deliverable presents the tools implmented in the ASTRABAT project to perform the dissemination ( web site, flyer, ....) , identify event to participate and disseminate activity of ASTRABAT, organise consortium to carry out good dissemination and external communication activity.

Test specifications

This deliverable is associated to the activities done in the task 2.3. All the specifications of test will be keep as reference for the test performed in WP 4, WP5 and WP6 to characterise materials and cells developed.

First report on Communication and Dissemination activities and update of the Communication and Dissemination Plan

This report summarizes the activity done for dissemination and communication on the first 18 Months project period.

Certification and standardization for ASSB in 2020

This report gives indication about the certification and standardization applied on the Li-ion cells and that will be applied as well on the ASSC in the framework of the project developments.This deliverable is performed in the framework of the task 7.4.

External geometry of cells

This deliverable is linked to the task 2.2. This deliverable gives the external dimension of the cell that will be developed during the project in WP5.

ASTRABAT final video

This video explains the ASTRABAT solutions from a visual point of view

ASTRABAT website

An public web site is set up to achieve a large public dissemination of ASTRABAT project.

ASTRABAT presentation video and flyer

This deliverable is the first public tools to communicate about ASTRABAT project ,with a flyer and video that introduce the project identity.


Fabrication of 3D silicon anode by inkjet printing: Opportunities and challenges

Author(s): Kinga Sztymela, Fabrice Rossignol, Marguerite Bienia, Nicolas Zapp, Kristian Nikolowski, Manuella Cerbelaud
Published in: Journal of Energy Storage, Issue 75, 2024, Page(s) 109567, ISSN 2352-1538
Publisher: Elsevier
DOI: 10.1016/j.est.2023.109567

Development of silicon polymer electrodes with a hybrid polymer electrolyte for all-solid-state lithium-ion batteries

Author(s): Mara Göttlinger, Simon Amrhein, Christian Piesold, Mario Weller, Simone Peters, Guinevere A. Giffin
Published in: Journal of the electrochemical society, Issue 2023, Journal of electrochemical society 170, 2023, Page(s) 030541-03516, ISSN 0013-4651
Publisher: Electrochemical Society, Inc.
DOI: 10.1149/1945-7111/acc697

Fabrication of modern lithium ion batteries by 3D inkjet printing: opportunities and challenges

Author(s): Kinga Sztymela, Marguerite Bienia, Fabrice Rossignol, Sophie Mailley, Steffen Ziesche, Jobin Varghese, Manuella Cerbelaud
Published in: Heliyon, Issue Volume 8 Issue 12, 2022, Page(s) e12623, ISSN 2405-8440
Publisher: Elsevier
DOI: 10.1016/j.heliyon.2022.e12623

Fabrication of 3D electrodes for modern lithium-ion batteries by inkjet printing : opportunities and challenges

Author(s): Kinga Sztymela
Published in: 2023
Publisher: UNILIM

Hybrid Polymers and their Use in Si-C Polymer Composite Anodes

Author(s): Christian Piesold
Published in: 2021
Publisher: ISC

(Hybrid)polymer solid state electrolyte

Author(s): Alex Friesen, Timo Brändel, Alexander Nassmacher
Published in: Common challenges of lithium based batteries, Issue 30-Apr-21, 2021
Publisher: Sublime project

Searching for OpenAIRE data...

There was an error trying to search data from OpenAIRE

No results available