Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch Deutsch
CORDIS - Forschungsergebnisse der EU
CORDIS

All Solid-sTate Reliable BATtery for 2025

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Market analysis report (öffnet in neuem Fenster)

This market analysis report gives an analysis of the scientific and technological achievementd on solid state battery and the evolving socio-economic context link to electric vehicles and solid state battery.

ASTRABAT Handbook (öffnet in neuem Fenster)

The ASTRABAT Handbook is an electronic and printable document highlighting the main exploitation project achievements, best practices, lessons learned and recommandations.

Environmental impact and safety/ toxicity report (öffnet in neuem Fenster)

This deliverable reports the activity about material safety used in the development of ASSC. This work is done in the task 7.2.

Certification specification roadmap (öffnet in neuem Fenster)

This reports is carried out in the framework of the task 74 to road map activity about the certification related to ASSC

Performance in extreme conditions and calendar ageing (öffnet in neuem Fenster)

"This deliverable reports on the endurance test done on the GEN#2D in the framework of the task 6.4."

Analysis of battery requirement for vehicle applications (öffnet in neuem Fenster)

This deliverable is obtained from the discussion done in the task 2.4. This deliverable gives the gives requirement in performances for differnt type of vehicles and will be integrated to the cost assesment and Life cycle analysis in WP7 .

Recyclability analysis and efficient use of raw materials (öffnet in neuem Fenster)

This deliverable reports compares two methods of recycling Li-ion cells: pyrometallurgical process and hydrometallurgical process. This work is performed in the task 7.3.

Communication and dissemination plan , initial report (öffnet in neuem Fenster)

This deliverable presents the tools implmented in the ASTRABAT project to perform the dissemination ( web site, flyer, ....) , identify event to participate and disseminate activity of ASTRABAT, organise consortium to carry out good dissemination and external communication activity.

Test specifications (öffnet in neuem Fenster)

This deliverable is associated to the activities done in the task 2.3. All the specifications of test will be keep as reference for the test performed in WP 4, WP5 and WP6 to characterise materials and cells developed.

Endurance test on electric vehicle profiles (öffnet in neuem Fenster)

"This deliverable reports the test of the GEN#2D using the electric vehicle profil based on the data reported in D2. 5."

First report on Communication and Dissemination activities and update of the Communication and Dissemination Plan (öffnet in neuem Fenster)

This report summarizes the activity done for dissemination and communication on the first 18 Months project period.

Second Report on Communication and Dissemination activities and update of the Communication and Dissemination Plan (öffnet in neuem Fenster)

This report summarizes the activity of communication and dissemination done during the second period of the project (M19-M30).

Final report on communication and dissemination activities updates (öffnet in neuem Fenster)

This report summarizes the activities done in communication and dissemination during the last period of the project.

Certification and standardization for ASSB in 2020 (öffnet in neuem Fenster)

This report gives indication about the certification and standardization applied on the Li-ion cells and that will be applied as well on the ASSC in the framework of the project developments.This deliverable is performed in the framework of the task 7.4.

LCA, LCC on ASTRABAT's cell prototypes (öffnet in neuem Fenster)

This deliverable reports the LCA and the LCC assessment done in the framework of task 7.1.

External geometry of cells (öffnet in neuem Fenster)

This deliverable is linked to the task 2.2. This deliverable gives the external dimension of the cell that will be developed during the project in WP5.

Workshop with key Stakeholders (öffnet in neuem Fenster)

The 2-days workshop will be organised in Bordeaux (Nouvelle Aquitaine) The stakeholders identified will be invited to analyse the international market situation and the results of ASTRABAT.

Final event organisation (öffnet in neuem Fenster)

Final event with stakeholders of European Green Initiative and EARPA, and regional representatives. This deliverable is linked to the task 8.7.

ASTRABAT final video (öffnet in neuem Fenster)

This video explains the ASTRABAT solutions from a visual point of view

ASTRABAT website (öffnet in neuem Fenster)

An public web site is set up to achieve a large public dissemination of ASTRABAT project.

ASTRABAT presentation video and flyer (öffnet in neuem Fenster)

This deliverable is the first public tools to communicate about ASTRABAT project ,with a flyer and video that introduce the project identity.

Veröffentlichungen

Fabrication of 3D electrodes for modern lithium-ion batteries by inkjet printing : opportunities and challenges

Autoren: Kinga Sztymela
Veröffentlicht in: 2023
Herausgeber: UNILIM

Development of Silicon Polymer Electrodes with a Hybrid Polymer Electrolyte for All-Solid-State Lithium-Ion Batteries (öffnet in neuem Fenster)

Autoren: Mara Göttlinger, Simon Amrhein, Christian Piesold, Mario Weller, Simone Peters, Guinevere A. Giffin
Veröffentlicht in: Journal of The Electrochemical Society, Ausgabe 170, 2023, Seite(n) 030541, ISSN 0013-4651
Herausgeber: Electrochemical Society, Inc.
DOI: 10.1149/1945-7111/acc697

Fabrication of 3D silicon anode by inkjet printing: Opportunities and challenges (öffnet in neuem Fenster)

Autoren: Kinga Sztymela, Fabrice Rossignol, Marguerite Bienia, Nicolas Zapp, Kristian Nikolowski, Manuella Cerbelaud
Veröffentlicht in: Journal of Energy Storage, Ausgabe 75, 2023, Seite(n) 109567, ISSN 2352-1538
Herausgeber: Elsevier
DOI: 10.1016/j.est.2023.109567

Fabrication of modern lithium ion batteries by 3D inkjet printing: opportunities and challenges (öffnet in neuem Fenster)

Autoren: Kinga Sztymela, Marguerite Bienia, Fabrice Rossignol, Sophie Mailley, Steffen Ziesche, Jobin Varghese, Manuella Cerbelaud
Veröffentlicht in: Heliyon, Ausgabe 8, 2024, Seite(n) e12623, ISSN 2405-8440
Herausgeber: Elsevier
DOI: 10.1016/j.heliyon.2022.e12623

Rechte des geistigen Eigentums

METHOD FOR PRODUCING A COATED CERAMIC PARTICLE BASED ON A LLZO MATERIAL

Antrags-/Publikationsnummer: 22 305640
Datum: 2022-04-29
Antragsteller: COMMISSARIAT A L ENERGIE ATOMIQUE ET AUX ENERGIES ALTERNATIVES

Suche nach OpenAIRE-Daten ...

Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten

Es liegen keine Ergebnisse vor

Mein Booklet 0 0