Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS

All Solid-sTate Reliable BATtery for 2025

CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.

Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .

Rezultaty

Market analysis report (odnośnik otworzy się w nowym oknie)

This market analysis report gives an analysis of the scientific and technological achievementd on solid state battery and the evolving socio-economic context link to electric vehicles and solid state battery.

ASTRABAT Handbook (odnośnik otworzy się w nowym oknie)

The ASTRABAT Handbook is an electronic and printable document highlighting the main exploitation project achievements, best practices, lessons learned and recommandations.

Environmental impact and safety/ toxicity report (odnośnik otworzy się w nowym oknie)

This deliverable reports the activity about material safety used in the development of ASSC. This work is done in the task 7.2.

Certification specification roadmap (odnośnik otworzy się w nowym oknie)

This reports is carried out in the framework of the task 74 to road map activity about the certification related to ASSC

Performance in extreme conditions and calendar ageing (odnośnik otworzy się w nowym oknie)

"This deliverable reports on the endurance test done on the GEN#2D in the framework of the task 6.4."

Analysis of battery requirement for vehicle applications (odnośnik otworzy się w nowym oknie)

This deliverable is obtained from the discussion done in the task 2.4. This deliverable gives the gives requirement in performances for differnt type of vehicles and will be integrated to the cost assesment and Life cycle analysis in WP7 .

Recyclability analysis and efficient use of raw materials (odnośnik otworzy się w nowym oknie)

This deliverable reports compares two methods of recycling Li-ion cells: pyrometallurgical process and hydrometallurgical process. This work is performed in the task 7.3.

Communication and dissemination plan , initial report (odnośnik otworzy się w nowym oknie)

This deliverable presents the tools implmented in the ASTRABAT project to perform the dissemination ( web site, flyer, ....) , identify event to participate and disseminate activity of ASTRABAT, organise consortium to carry out good dissemination and external communication activity.

Test specifications (odnośnik otworzy się w nowym oknie)

This deliverable is associated to the activities done in the task 2.3. All the specifications of test will be keep as reference for the test performed in WP 4, WP5 and WP6 to characterise materials and cells developed.

Endurance test on electric vehicle profiles (odnośnik otworzy się w nowym oknie)

"This deliverable reports the test of the GEN#2D using the electric vehicle profil based on the data reported in D2. 5."

First report on Communication and Dissemination activities and update of the Communication and Dissemination Plan (odnośnik otworzy się w nowym oknie)

This report summarizes the activity done for dissemination and communication on the first 18 Months project period.

Second Report on Communication and Dissemination activities and update of the Communication and Dissemination Plan (odnośnik otworzy się w nowym oknie)

This report summarizes the activity of communication and dissemination done during the second period of the project (M19-M30).

Final report on communication and dissemination activities updates (odnośnik otworzy się w nowym oknie)

This report summarizes the activities done in communication and dissemination during the last period of the project.

Certification and standardization for ASSB in 2020 (odnośnik otworzy się w nowym oknie)

This report gives indication about the certification and standardization applied on the Li-ion cells and that will be applied as well on the ASSC in the framework of the project developments.This deliverable is performed in the framework of the task 7.4.

LCA, LCC on ASTRABAT's cell prototypes (odnośnik otworzy się w nowym oknie)

This deliverable reports the LCA and the LCC assessment done in the framework of task 7.1.

External geometry of cells (odnośnik otworzy się w nowym oknie)

This deliverable is linked to the task 2.2. This deliverable gives the external dimension of the cell that will be developed during the project in WP5.

Workshop with key Stakeholders (odnośnik otworzy się w nowym oknie)

The 2-days workshop will be organised in Bordeaux (Nouvelle Aquitaine) The stakeholders identified will be invited to analyse the international market situation and the results of ASTRABAT.

Final event organisation (odnośnik otworzy się w nowym oknie)

Final event with stakeholders of European Green Initiative and EARPA, and regional representatives. This deliverable is linked to the task 8.7.

ASTRABAT final video (odnośnik otworzy się w nowym oknie)

This video explains the ASTRABAT solutions from a visual point of view

ASTRABAT website (odnośnik otworzy się w nowym oknie)

An public web site is set up to achieve a large public dissemination of ASTRABAT project.

ASTRABAT presentation video and flyer (odnośnik otworzy się w nowym oknie)

This deliverable is the first public tools to communicate about ASTRABAT project ,with a flyer and video that introduce the project identity.

Publikacje

Fabrication of 3D electrodes for modern lithium-ion batteries by inkjet printing : opportunities and challenges

Autorzy: Kinga Sztymela
Opublikowane w: 2023
Wydawca: UNILIM

Development of Silicon Polymer Electrodes with a Hybrid Polymer Electrolyte for All-Solid-State Lithium-Ion Batteries (odnośnik otworzy się w nowym oknie)

Autorzy: Mara Göttlinger, Simon Amrhein, Christian Piesold, Mario Weller, Simone Peters, Guinevere A. Giffin
Opublikowane w: Journal of The Electrochemical Society, Numer 170, 2023, Strona(/y) 030541, ISSN 0013-4651
Wydawca: Electrochemical Society, Inc.
DOI: 10.1149/1945-7111/acc697

Fabrication of 3D silicon anode by inkjet printing: Opportunities and challenges (odnośnik otworzy się w nowym oknie)

Autorzy: Kinga Sztymela, Fabrice Rossignol, Marguerite Bienia, Nicolas Zapp, Kristian Nikolowski, Manuella Cerbelaud
Opublikowane w: Journal of Energy Storage, Numer 75, 2023, Strona(/y) 109567, ISSN 2352-1538
Wydawca: Elsevier
DOI: 10.1016/j.est.2023.109567

Fabrication of modern lithium ion batteries by 3D inkjet printing: opportunities and challenges (odnośnik otworzy się w nowym oknie)

Autorzy: Kinga Sztymela, Marguerite Bienia, Fabrice Rossignol, Sophie Mailley, Steffen Ziesche, Jobin Varghese, Manuella Cerbelaud
Opublikowane w: Heliyon, Numer 8, 2024, Strona(/y) e12623, ISSN 2405-8440
Wydawca: Elsevier
DOI: 10.1016/j.heliyon.2022.e12623

Prawa własności intelektualnej

METHOD FOR PRODUCING A COATED CERAMIC PARTICLE BASED ON A LLZO MATERIAL

Numer wniosku/publikacji: 22 305640
Data: 2022-04-29
Wnioskodawca/wnioskodawcy: COMMISSARIAT A L ENERGIE ATOMIQUE ET AUX ENERGIES ALTERNATIVES

Wyszukiwanie danych OpenAIRE...

Podczas wyszukiwania danych OpenAIRE wystąpił błąd

Brak wyników

Moja broszura 0 0