Performance Improvement for Vehicles on Track 2

Informations projet

PIVOT2

N° de convention de subvention: 881807

DOI

10.3030/881807

Projet clôturé

Date de signature de la CE 19 Decembre 2019

Date de début 1 Octobre 2019

Date de fin 30 Juin 2023

Financé au titre de

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Coût total

Aucune donnée

Contribution de l’UE

€ 17 845 062,00

Coordonné par

SIEMENS MOBILITY GMBH
Germany

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Documents, reports (19)

D7.3 Position paper

The deliverable of the Task 7.3 is the final report including the propositions for WG10, the description of simulation process to limit over-speed testing improvement of the method for validating a model against measurements

D20.1 Quality Plan and project Manual

The Quality Plan and project Manual provides the description of the quality management policy of the project describing the necessary procedures, for example guidelines or Gantt tables.

D2.4 Optimization tool for multi-functional design solutions report

Optimization tool for multi-functional design solutions report

D9.4 Virtual Validation & Certification Brakes: Executive Summary of Specifications

This deliverable provides summary of following specification developed in subtasks 9.3.1, 9.3.2 and 9.3.3 - Railway Vehicle Certification Process Specification focusing Brake Systems (including Virtual Validation & Certification)- Railway Vehicle Simulator Specification (allowing Virtual Validation & Certification)- Railway Vehicle Verification & Validation Specification (allowing to test a railway vehicle simulator against its specification)

D19.3 Dissemination and Exploitation Final activities report

The final activities report compares the planned activities described in D19.2 with the activities made during the project and draws conclusions for future projects (lessons learnt).

D4.3 KPI assessment report

KPI assessment report

D17.4 Extract Final KPI Report of TD1.7

General public description of the final concepts and the benefices compared to the original ambitions.

D8.3 Concrete applications description

The deliverable of the Task 8.3 is the final report including the new propositions, taking into account return on experiment about what has been done in WP7.

D18.4 Fundamental work on HVAC

Overview on standardisation of interfacesApplicability of alternative refrigerantsRisk aspectsFirst estimation of KPI reference values and KPI-impact of CO2 HVAC unitsImprovement in the environmental footprint(Results of tasks 18.7 and 18.8)

D3.4 Assessment for the optimization tool report

Assessment for the optimization tool report comparing the conceptual designs derived from the optimization tool with a laboratory demonstrator.

D15.1 Specifications for Open Call S2R-OC-IP1-01-2019

The members of WP15 will written a Design Brief to the Open Call to clarify expectations, deliverables and constraints and help the Open Call to start the work with any misunderstandings. This document will also define the data WP members could share with the Open Call and which data we need from the Open Call to continue our work.

D16.4 Extract Ecodesign analysis of concepts

Extract of the 16.1 which could be public

D9.5 Innovative Friction Pairing solutions - High level concept

- Innovative Friction pairing feasibility study - Market needs and new materials investigation for dust reduction focus

D4.1 Certification procedures report

Certification procedures report for the new generation of carbody shells including new materials

D14.4 kpi report

Definition of the kpi, definition, of the references to calculate the kpi and presentation of the results of the calculations or measures

D11.4 Detailed proposal on adhesion related standards changes

- the proposals on adhesion-related standards changes discussed by the PIVOT2 task group will be summarized within this deliverable- where applicable, additional measurements will be made to support the proposals by analysed measurement data

D20.2 Final Recommendations report for future of S2R

The Final Recommendations report for future of S2R compares the planned activities of Pivot-2 with the activities made during the project and draws conclusions for future projects.

D19.2 Set up a dissemination and exploitation plan for the project

The dissemination and exploitation plan provides the description of the planned activities of the project regarding dissemination and exploitation, i.e. preparing dissemination material, publishing papers in industry journals, exhibiting at trade fairs and participating in other events etc.)

D1.5 Optimization tool preliminary results

Optimization tool preliminary results applied to railway carbodies.

Demonstrators, pilots, prototypes (7)

D8.1 Technical Demonstrator of lighter running gear components

Evaluation of the different Technical Demonstrators, the obtained results and the benefits achieved including conclusion and recommendations.

D3.1 Talgo Demonstrator

Prototype demonstration in InnoTrans 2022 of Talgo Demonstrator

D17.2 Virtual prototypes for Innotrans 2022 - Interiors and Cabin

Virtual demonstrator to test the immersive configurator and build in real time a new layout and ambiance on board. The demonstrator will be done in Virtual Reality.

D3.3 Siemens Demonstrator

Siemens Demonstrator for the test campaign

D3.2 Bombardier Demonstrator

Bombardier Demonstrator for the test campaign

D6.1 Technical Demonstrator of HMS

This deliverable will include a description of the different Technical Demonstrator, the obtained results and the benefits achieved by the different systems.

D17.1 Physical prototypes for Innotrans 2022 - Interiors

Physical demonstrator in real size to test in real time the new interiors

Publications

Non-peer reviewed articles (3)

A condition monitoring approach for the detection of defects in the primary suspension of railway vehicles

Auteurs: Asier Alonso et al.
Publié dans: Journal of Rail and Rapid Transit, 2023, ISSN 0954-4097
Éditeur: Mechanical Engineering Publications Ltd.

A sequential mixed-integer programming method for concurrent optimization of core topology and face sheet thickness of a sandwich beam

Auteurs: J. Larsson
Publié dans: Journal of Sandwich Structures and Materials, 2023, ISSN 1099-6362
Éditeur: SAGE Publications

General article of French companies and research labs contributions and results to S2R

Auteurs: Various
Publié dans: Revue générale des chemins de fer, Numéro Monthly, 2022, ISSN 0035-3183
Éditeur: Editions Hervé Chopin

Conference proceedings (1)

Virtual Testing for Authorization of Railway Vehicle Brake Systems

Auteurs: Oliver Urspruch
Publié dans: NAFEMS, 2021
Éditeur: NAFEMS