Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

Eco-friendly Frame Clips and System Brackets for a fuselage demonstrator

Description du projet

Des pièces structurelles d’avion en composite respectueuses de l’environnement

Le projet ECO-CLIP, financé par l’UE, entend démontrer la faisabilité technique, environnementale et économique de la fabrication de pièces structurelles d’avions, en particulier de clips de cadre et d’attaches de système, à l’aide de composites recyclés provenant de déchets d’usine. L’approche globale du projet consiste à développer un composite recyclé à courtes fibres basé sur le CF/LMPAEK, le processus de fabrication des clips et des attaches et la technologie de soudage permettant de les assembler dans un fuselage sans utiliser de fixations. L’ensemble du processus de développement du produit et de la technologie de fabrication sera validé par une évaluation du cycle de vie et des études de coûts.

Objectif

ECO-CLIP project aims to demonstrate the technical, environmental and economic feasibility of manufacturing structural parts of aircrafts, specifically frame clips and system brackets, using recycled CF/LMPAEK obtained from factory waste.
The overall approach of ECO-CLIP is to develop a short fibre recycled composite based on CF/LMPAEK, the manufacturing process for fabricating structural parts of aircraft (clips and brackets) and the welding technology for a success joining in a fuselage demonstrator avoiding fasteners. The whole product development process and manufacture technology will be validated by LCA/LCC studies. As final result, the new manufacturing processing route will be demonstrated as cost-effective and environmentally favorable by LCA and LCC studies. This can be understood in different stages:
• Designing of recycling route to re-use material from factory waste
• Material development: exploring different mixtures of %wt recycled %wt virgin CF/LMPAEK to accomplish the structural and mechanical requirements.
• Design of manufacturing processes fulfilling the use case scenarios (clips and brackets)
• Selected the joining technology for a MFFD
• Assessment of developed technology through a study of ecological and economical impact
The innovation results from ECO-CLIP project will comprise: development of a new composite material based on short fibre recycled CF/LMPAEK, optimised for injection moulding and 3D-printing, and methodology to redesign structural parts to be installed on a MFFD. These solutions will enable to validate the assessment of the technology, and the viability of the environmental and economical impact.

Champ scientifique (EuroSciVoc)

Mots‑clés

Programme(s)

Thème(s)

Régime de financement

IA - Innovation action

Voir tous les projets financés dans le cadre de ce programme de financement

Appel à propositions

(s’ouvre dans une nouvelle fenêtre) H2020-CS2-CFP10-2019-01

Voir tous les projets financés au titre de cet appel

Coordinateur

ASOCIACION DE INVESTIGACION METALURGICA DEL NOROESTE
Contribution nette de l'UE
€ 291 000,00
Coût total
€ 291 000,00

Participants (1)