Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski pl
CORDIS - Wyniki badań wspieranych przez UE
CORDIS

Eco-friendly Frame Clips and System Brackets for a fuselage demonstrator

Opis projektu

Ekologiczne kompozytowe elementy konstrukcyjne samolotu

Twórcy finansowanego ze środków UE projektu ECO-CLIP chcą potwierdzić wykonalność techniczną, środowiskową i ekonomiczną wytwarzania części konstrukcyjnych samolotu, konkretnie zaczepów do ram i wsporników, z kompozytów otrzymanych z recyklatu z odpadów poprodukcyjnych. Celem projektu jest opracowanie kompozytu recyklatowego z krótkim włóknem w ramach procesu wytwarzania zaczepów i wsporników oraz technologii spawania zapewniającej skuteczne łączenie obu elementów do kadłuba bez konieczności użycia złączy o nazwie CF/LMPAEK. Zarówno cały proces opracowywania produktu, jak i technologia wytwarzania zostaną w ramach walidacji poddane ocenie cyklu życia i analizie kosztów.

Cel

ECO-CLIP project aims to demonstrate the technical, environmental and economic feasibility of manufacturing structural parts of aircrafts, specifically frame clips and system brackets, using recycled CF/LMPAEK obtained from factory waste.
The overall approach of ECO-CLIP is to develop a short fibre recycled composite based on CF/LMPAEK, the manufacturing process for fabricating structural parts of aircraft (clips and brackets) and the welding technology for a success joining in a fuselage demonstrator avoiding fasteners. The whole product development process and manufacture technology will be validated by LCA/LCC studies. As final result, the new manufacturing processing route will be demonstrated as cost-effective and environmentally favorable by LCA and LCC studies. This can be understood in different stages:
• Designing of recycling route to re-use material from factory waste
• Material development: exploring different mixtures of %wt recycled %wt virgin CF/LMPAEK to accomplish the structural and mechanical requirements.
• Design of manufacturing processes fulfilling the use case scenarios (clips and brackets)
• Selected the joining technology for a MFFD
• Assessment of developed technology through a study of ecological and economical impact
The innovation results from ECO-CLIP project will comprise: development of a new composite material based on short fibre recycled CF/LMPAEK, optimised for injection moulding and 3D-printing, and methodology to redesign structural parts to be installed on a MFFD. These solutions will enable to validate the assessment of the technology, and the viability of the environmental and economical impact.

Dziedzina nauki (EuroSciVoc)

Słowa kluczowe

Program(-y)

Temat(-y)

System finansowania

IA - Innovation action

Wyświetl wszystkie projekty finansowane w ramach tego programu finansowania

Zaproszenie do składania wniosków

(odnośnik otworzy się w nowym oknie) H2020-CS2-CFP10-2019-01

Wyświetl wszystkie projekty finansowane w ramach tego zaproszenia

Koordynator

ASOCIACION DE INVESTIGACION METALURGICA DEL NOROESTE
Wkład UE netto
€ 291 000,00
Koszt całkowity
€ 291 000,00

Uczestnicy (1)