Deliverables
IWT and icing facilities ready for the testing of sAW devices The ice wind tunnels and other icing facilities ice adhesion tester freezing delay devices tc utilised to test the performance of the acoustic devices for deicing should be modified to enable the introduction of the icing platforms and the wiring connections with the electronic placed outside the setup When possible observation window for optical andor spectroscopic observation would be also incorporated in these facilities These modified icing facilities constitute the basis of this deliverable
Dissemination and Exploitation Plan Dissemination of results should serve not only to spread the main achievements of the project but also to reinforce the capacity of exploiting the main results This deliverable contains a report with all possible actions contributing to the exploitation of results and its future transfer to the industry This exploitation is envisaged at the level of partial results eg sensor SAW to detect ice SAW activation onto large surfaces etc and for the complete technology intended for an autonomous operation of deicing over large surfaces
Report on atomic scale excitation by (s)AWsReport describing the atomic scale effects of SAW excitation of water molecules at icesubstrate interfaces This deliverable will gather main atomic simulation results of the effect of acoustic activation of water molecules at the interface with an oscillating substrate The way how the mechanical energy is transferred to the ice molecules the effect of this transfer in activating the water molecules leading eventually to their detachment from the substrate will be also reported in this deliverable together with expected effects of change the frequency of the oscillation its amplitude etc
De-icing activity of single-(s)AW devicesReport on the deicing activity of singlesAW devices This deliverable will report the results of the effectiveness of deicing from singlesAW decides activated by acoustic excitation and the dependence of the effectiveness of deicing on the operating conditions of the device
Anti-icing and superhydrophobic performance of passive layersReport on antiicing and superhydrophobicperformance of the passive layers integrated in the multisAW devices Termination of multisAW devices consists of a antiicing layer providing an effective passive antiicing function The wetting the superhydrophilicity is related with antiicing capacity and antiicing properties of these layers will be examined correlated with the composition and microstructure and the results reported in this deliverable
Report with management rulesReport with management rules The long duration of the project 48 months and the relatively large consortium the foreseeable need of adopting alternative measures etc requires defining clear rules to adopt agreements to communicate them both internally and to the EU doing rules etc All these management rules will be agreed in the first meeting and include in a report that is the basis of this deliverable
Formation of the Advisory Board This deliverable delas with the formation of the advisory board of the project for which a specific meeting will be organised Before members will have access to the project content after signing a NDA and have the possibility to contact of the members of the consortium and to propose specific actions improving the plans of the project Adoption of this recommendations will require the agreement of the consortium and the EU
SOUNDofICE web services The webpage contemplated in this device will have two functions serve as internal repository of information and exchange of documents and an external area focussed on spreading the information about the project and project results links to other web pages comparison with other technologies breakthroughs etc
First Deliverable on Publications, conferences and other communications/dissemination actionsPublications conferences and other communicationsdissemination actions This deliverable encompasses the plan for workshop preparation and other specific dissemination actions foreseable during the period in order to spread within the scientific community the main results of the project
Project is expected to produce a large set of data whose management for future use and exploitation requires specific organisation and management plan This deliverable includes both the Data Management Plan and decission regarding the open data to share and procedures within the Open Research Data Pilot
Publications
Author(s):
Aurelio García-Valenzuela; Antonio Montero Alcaide; Víctor J. Rico; Francisco J. Ferrer; Francisco J. Ferrer; G. Alcalá; Teresa C. Rojas; Rafael Alvarez; Agustín R. González-Elipe; Alberto Palmero
Published in:
Plasma Processes and Polymers, Issue 19, 2022, Page(s) 2100116, ISSN 1612-8850
Publisher:
Wiley - V C H Verlag GmbbH & Co.
DOI:
10.1002/ppap.202100116
Author(s):
Bartlomiej Przybyszewski, Rafal Kozera, Zuzanna D. Krawczyk, Anna Boczkowska, Ali Dolatabadi, Adham Amer, Bogna Sztorch, Robert E. Przekop
Published in:
Materials, Issue 14/19, 2021, Page(s) 5687, ISSN 1996-1944
Publisher:
MDPI Open Access Publishing
DOI:
10.3390/ma14195687
Author(s):
Parra-Barranco J, Lopez-Santos C, Sánchez-Valencia JR, Borras A, Gonzalez-Elipe AR, Barranco A.
Published in:
Nanomaterials, Issue 11, 2021, Page(s) 2566, ISSN 2079-4991
Publisher:
MDPI
DOI:
10.3390/nano11102566
Author(s):
Muñoz-Piña, Sandra; Alcaide, A. M.; Limones-Ahijón, Blanca; Oliva-Ramírez, M.; Rico, Víctor J.; Alcalá, G.; González Sagardoy, María Ujué; García-Martín, José Miguel; Álvarez, Rafael; Wang, D.; Schaaf, Peter; González-Elipe, Agustín R.; Palmero, Alberto
Published in:
Surface and Coating Technologies, Issue 436, 2022, Page(s) 128293, ISSN 0257-8972
Publisher:
Elsevier BV
DOI:
10.1016/j.surfcoat.2022.128293
Author(s):
Joaquín Rivera-Sahún; Luis Porta-Velilla; Germán F. de la Fuente; Luis A. Angurel
Published in:
Polymers, Issue 14, 2022, Page(s) 5554, ISSN 2073-4360
Publisher:
MDPI
DOI:
10.3390/polym14245554
Author(s):
Ismail Ghemras, Laura Montes, Carmen Lopez-Santos, Agustin R. González-Elipe, Victor Rico
Published in:
Applied Surface Science, Issue 630, 2023, Page(s) 157357, ISSN 0169-4332
Publisher:
Elsevier BV
DOI:
10.1016/j.apsusc.2023.157357
Author(s):
Laura Montes,Jose M. Román, Xabier García-Casas, Javier Castillo-Seoane, Juan R. Sánchez-Valencia, Ángel Barranco, Carmen López-Santos, Ana Borrás
Published in:
Advanced Materials Interfaces, Issue 8, 2021, Page(s) 2100767, ISSN 2196-7350
Publisher:
John Wiley and Sons Inc
DOI:
10.1002/admi.202100767
Author(s):
Jaime del Moral; Laura Montes; Victor Joaquin Rico‐Gavira; Carmen López‐Santos; Stefan Jacob; Manuel Oliva‐Ramirez; Jorge Gil‐Rostra; Armaghan Fakhfouri; Shilpi Pandey; Miguel Gonzalez del Val; Julio Mora; Paloma García‐Gallego; Pablo Francisco Ibáñez‐Ibáñez; Miguel Angel Rodríguez‐Valverde; Andreas Winkler; Ana Borrás; Agustin Rodriguez González‐Elipe
Published in:
Advanced Functional Materials, Issue 33, 2023, Page(s) 2209421, ISSN 1616-301X
Publisher:
John Wiley & Sons Ltd.
DOI:
10.48550/arxiv.2207.14783
Author(s):
Julio Mora, Paloma García, Francisco Carreño, Miguel González, Marcos Gutiérrez, Laura Montes, Victor Rico Gavira, Carmen López-Santos, Adrián Vicente, Pedro Rivero, Rafael Rodríguez, Silvia Larumbe, Carolina Acosta, Pablo Ibáñez-Ibáñez, Alessandro Corozzi, Mariarosa Raimondo, Rafal Kozera, Bartlomiej Przybyszewski, Agustín R. González-Elipe, Ana Borrás, Francisco Redondo, Alina Agü
Published in:
Surface and Coatings Technology, Issue 465, 2023, Page(s) 129585, ISSN 0257-8972
Publisher:
Elsevier BV
DOI:
10.1016/j.surfcoat.2023.129585
Author(s):
Kozera R, Przybyszewski B, Krawczyk ZD, Boczkowska A, Sztorch B, Przekop RE, Barbucha R, Tański M, Garcia-Casas X, Borras A.
Published in:
Processes, Issue 8, 2020, Page(s) 1642, ISSN 2227-9717
Publisher:
MDPI
DOI:
10.3390/pr8121642
Author(s):
Jakob Sablowski; Lydia Galle; Julia Grothe; Mehrzad Roudini; Andreas Winkler; Simon Unz; Michael Beckmann
Published in:
Journal of Heat Transfer, Issue 144, 2022, Page(s) 061601, ISSN 0022-1481
Publisher:
ASME
DOI:
10.1115/1.4053922
Author(s):
Jacob, Stefan;
Pandey, Shilpi;
Moral, Jaime Del;
Karimzadeh, Atefeh;
Gil-Rostra, Jorge;
González-Elipe, Agustín R.;
Borrás, Ana;
Winkler, Andreas
Published in:
Advanced Materials Technologies, 2023, Page(s) 2300263, ISSN 2365-709X
Publisher:
John Wiley and Sons Inc
DOI:
10.1002/admt.202300263
Author(s):
Bobaru, Stefania; Rico-Gavira, Víctor Joaquín; García-Valenzuela, Aurelio; López Santos, Carmen; González-Elipe, Agustín R.
Published in:
Materials Today Communications, Issue 31, 2022, Page(s) 103266, ISSN 2352-4928
Publisher:
Elsevier BV
DOI:
10.1016/j.mtcomm.2022.103266
Author(s):
Aurelio García-Valenzuela, Armaghan Fakhfouri, Manuel Oliva-Ramirez,
Victor Rico-Gavira, Teresa Cristina Rojas, Rafael Alvarez, Siegfried B. Menzel,
Alberto Palmero, Andreas Winkler and Agustín R. González-Elipe
Published in:
Materials Horizon, Issue 8, 2021, Page(s) 515, ISSN 2051-6347
Publisher:
Royal Society of Chemistry
DOI:
10.1039/d0mh01540g
Author(s):
Budagosky, Jorge; García-Casas, Xabier; Sánchez-Valencia, Juan R.; Barranco, Ángel; Borrás, Ana
Published in:
Plasma Processes and Polymers, Issue 19, 2022, Page(s) e2100179, ISSN 1612-8850
Publisher:
Wiley - V C H Verlag GmbbH & Co.
DOI:
10.1002/ppap.202100179
Searching for OpenAIRE data...
There was an error trying to search data from OpenAIRE
No results available