European Commission logo
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS

Spatially resolved acoustic, mechanical and ultrasonic sensing for smart batteries

Description du projet

Des capteurs abordables pour détecter les dégradations et les pannes des batteries

Pour identifier les changements qui se produisent à l’intérieur d’une batterie et qui entraînent dégradations et pannes, il faut des capteurs efficaces. Le projet SPARTACUS, financé par l’UE, cherche à mettre au point des capteurs rentables qui détectent les mécanismes de dégradation et de défaillance avant que la batterie perde son efficacité. L’équipe du projet concevra des capteurs de température ainsi que des capteurs mécaniques et acoustiques, complétés par un compteur d’impédance électrochimique. Le projet corrélera les données des capteurs aux performances de la batterie et aux modèles correspondants. Il surveillera en permanence l’état des différents paramètres afin que la batterie puisse être soumise à des cycles à un niveau optimal en fonction de l’âge. En outre, un système avancé de gestion des batteries sera élaboré. En exploitant les données des capteurs, la surveillance des cellules pourrait être améliorée, ce qui permettra de renforcer l’efficacité et la sécurité des batteries sans risque de surchauffe, d’incendie ou d’explosion.

Objectif

The global objective of the Spartacus project is to develop an affordable sensor solution to detect degradation and failure mechanisms, intentionally before a loss of performance. The project will focus on mechanical and acoustic sensors completed by electrochemical impedance measurement and temperature sensors. The sensoric data will be correlated to battery performance and to corresponding models. The state of different parameters (SoX) will be monitored continuously which enables the management system to cycle the battery on an age-dependent optimum level. An advanced Battery Management System (BMS) will be developed. BMS will work in proximity to the cells terminals (i.e. a cell management system, CMS) to efficiently exploit all the sensoric data without extra-wiring harness. At the end of the project, an 24V smart battery module will be assembled and the CMS enhanced by the senoric data will be validated in different ageing conditions or for misused or abused batteries at lab-scale (TRL4).
Quantitatively, a reduction of 20% charging time without any negative effect on life time by exploitation of sensoric data is targeted. By usage of sensoric data, cell monitoring will be also improved and will increase the safety of batteries and avoid overheating (thermal runaway), fire or explosion.
Spartacus project is based on 6 specific objectives:
- OBJ1: Development of new sensors design for smart batteries
- OBJ2: Integration of the sensors according to industrial constraints incl. Packaging / Assembly technology
- OBJ3: Data acquisition and data pre-processing for BMS integration
- OBJ4: Modelling of failure mechanisms and correlation with SoX
- OBJ5: Development of an advanced BMS and standardization procedures
- OBJ6: Economic and environmental assessment
Spartacus consortium is a strong partnership of 5 European research centres and 1 leading industrial having extensive track-records in materials, battery, sensors, modelling, BMS and associated domains.

Appel à propositions

H2020-LC-BAT-2019-2020

Voir d’autres projets de cet appel

Sous appel

H2020-LC-BAT-2020-3

Coordinateur

FRAUNHOFER GESELLSCHAFT ZUR FORDERUNG DER ANGEWANDTEN FORSCHUNG EV
Contribution nette de l'UE
€ 1 146 851,25
Adresse
HANSASTRASSE 27C
80686 Munchen
Allemagne

Voir sur la carte

Région
Bayern Oberbayern München, Kreisfreie Stadt
Type d’activité
Research Organisations
Liens
Coût total
€ 1 146 851,25

Participants (6)