Resultado final
Initial Data Management Plan specifying which data will be generated in the project the standardsmethodology that will be used how this data will be exploited andor sharedmade accessible for verification and reuse and how this data will be curated and preserved
Final Data Management PlanFinal Data Management Plan to make research data findable, accessible, interoperable and reusable
Report on prototyping of 20x 1Ah baseline pouch battery cells with integrated level 2 sensors
Advanced module-level state estimators based on level 1 sensorsAdvanced module-level SOC, SOH, SOE, SOP and SOS estimators based on level 1 sensors: report + software
Report adaptation level 1 sensorsReport on adaptation of level 1 sensors for incorporation into battery cells
Dissemination and Exploitation PlanThe Dissemination and Exploitation Plan see section 222 for more details
Testing plan for cells and modulesTesting plan containing procedures for testing baseline cells cells with integrated sensors and the modules
Project HandbookProject Handbook describing all procedures of the project contains a detailed Gantt chart and work breakdown structure including a schedule per task with responsible partners use of resources deliverables and dependencies to other tasks
Report on development of electrical connectionsReport on development of the printed electrical connections and their encapsulation[
Report on level 2 sensor characterisationReport on level 2 sensor morphological and electrochemical characterisation
Test report on cell and module performance and safetyThe testing report will contain all results from T5.1 and will be updated incrementally as results become available. Due to the larger amount of data expected compared to a scenario without cell-integrated sensors, special consideration will be given to data aspects such as data storage, analysis, compression, metadata/descriptors, correlation and combination with other data
Initial Quality Assurance and Risk Management planInitial Quality Assurance and Risk Management Plan for project quality and risk management
Final Quality Assurance and Risk Management planFinal Quality Assurance and Risk Management Plan for project quality and risk management including an updated, extended and completed risk analysis
Use cases, KPIs and cell, module requirementsReport containing a description of the use cases the KPIs and an overview of the requirements at cell and module level
Report on prototyping baseline pouch battery cellsReport on prototyping of 40x 1Ah baseline pouch battery cells and 20x 5Ah baseline pouch battery cells
Advanced state estimation algorithms based on level 2 sensorsReport on advanced SOC, SOH, SOE, SOP and SOS estimation algorithms based on level 2 sensors
Recycling assessment and integrated validationD5.3 will contain the recycling assessment. Furthermore it will consider the results obtained in the testing (T5.1) and those from the cost benefit assessment (T5.2) in order to come to an overall technical, economic, manufacturing and (limited) environmental assessment of the sensor-equipped cells and modules, and whether these are able to meet the expectations placed on them [
Report on prototyping 1Ah cells with integrated level 1 sensorsReport on prototyping of 20x 1Ah baseline pouch battery cells with integrated level 1 sensors
Cost benefit assessmentThe cost benefit assessment will use the bills of materials to estimate the materials cost and will use process descriptions to estimate energy and labour costs for the lab scale. Appropriate assumptions will be used to estimate the costs at upscaled production volumes. Benefits like shorter charging time, increase capacity and extended lifetime will be assessed
Report on selection of inks and pastesReport on selection of inks and pastes with different rheological properties and solvent formulations
Report on prototyping 5Ah cells with integrated level 1 sensorsReport on prototyping of 20x 5Ah baseline pouch battery cells with integrated level 1 sensors
Report on development of printed electrodes on cell componentsReport on development of printed electrodes on cell components and their performance evaluation
Report on characterisation of pouch cell with integrated level 2 sensorReport on prototyping of 40x 1Ah baseline pouch battery cells and 20x 5Ah baseline pouch battery cells
The SENSIBAT project identity contains a logo leaflet power point presentation and audiovisual material for public presentations
I SENSIBAT AB workshop1st SENSIBAT Advisory Board workshop
II SENSIBAT AB workshop2nd SENSIBAT Advisory Board workshop
BMS-master software environmentBMS-master software environment implemented on a rapid prototyping platform
Demonstrator battery module based on the series connection of at least six 5Ah pouch cells with level 1 sensors and equipped with BMS-slave board, and the junction box
BMS-slave demonstrator supporting the read out of cell-integrated level 1 sensorsBMS-slave supporting the read out of cell-integrated pressure and temperature sensors (level 1)
Project website used for communication purposes including events news projects facts partners public deliverables etc
Publicaciones
Autores:
Ahmad Bagheri, Sebastiano Bellani, Hossein Beydaghi, Matilde Eredia, Leyla Najafi, Gabriele Bianca, Marilena Isabella Zappia, Milad Safarpour, Maedeh Najafi, Elisa Mantero, Zdenek Sofer, Guorong Hou, Vittorio Pellegrini, Xinliang Feng, Francesco Bonaccorso
Publicado en:
ACS Nano, 2022, ISSN 1936-0851
Editor:
American Chemical Society
DOI:
10.1021/acsnano.2c05640
Autores:
Sebastiano Bellani, Antonino Bartolotta, Antonio Agresti, Giuseppe Calogero, Giulia Grancini, Aldo Di Carlo, Emmanuel Kymakis, Francesco Bonaccorso
Publicado en:
Chemical Society Reviews, 2021, ISSN 0306-0012
Editor:
Royal Society of Chemistry
DOI:
10.1039/d1cs00106j
Autores:
Hossein Beydaghi, Sebastiano Bellani, Leyla Najafi, Reinier Oropesa-Nuñez, Gabriele Bianca, Ahmad Bagheri, Irene Conticello, Beatriz Martín-García, Sepideh Kashefi, Michele Serri, Liping Liao, Zdeněk Sofer, Vittorio Pellegrini, Francesco Bonaccorso
Publicado en:
Nanoscale, 2022, ISSN 2040-3372
Editor:
RSC
DOI:
10.1039/d1nr07872k
Autores:
F.S.J. Hoekstra, M.C.F. Donkers, H.J. Bergveld
Publicado en:
Journal of Energy Storage, Edición vol. 65, 2023, 2023, ISSN 2352-152X
Editor:
Elsevier
DOI:
10.1016/j.est.2023.107185
Autores:
Maedeh Najafi, Sebastiano Bellani, Valerio Galli, Marilena Isabella Zappia, Ahmad Bagheri, Milad Safarpour, Hossein Beydaghi, Matilde Eredia, Lea Pasquale, Riccardo Carzino, Simone Lauciello, Jaya-Kumar Panda, Rosaria Brescia, Luca Gabatel, Vittorio Pellegrini, Francesco Bonaccorso
Publicado en:
Electrochem, 2022, ISSN 2673-3293
Editor:
MDPI
DOI:
10.3390/electrochem3030032
Autores:
Matilde Eredia, Sebastiano Bellani, Marilena I. Zappia, Luca Gabatel, Valerio Galli, Ahmad Bagheri, Hossein Beydaghi, Gabriele Bianca, Irene Conticello, Vittorio Pellegrini, Francesco Bonaccorso
Publicado en:
APL Materials, 2022, ISSN 2166-532X
Editor:
AIP
DOI:
10.1063/5.0106932
Autores:
Hossein Beydaghi, Sara Abouali, Sanjay B. Thorat, Antonio Esau Del Rio Castillo, Sebastiano Bellani, Simone Lauciello, Silvia Gentiluomo, Vittorio Pellegrini, Francesco Bonaccorso
Publicado en:
RSC Advances, 2021, ISSN 2046-2069
Editor:
Royal Society of Chemistry
DOI:
10.1039/d1ra06643a
Autores:
F.S.J.Hoekstra; L.H.J.Raijmakers; M.C.F.Donkers; H.J.Bergveld
Publicado en:
Journal of Energy Storage, Edición Volume 56, December 2022, 2022, ISSN 2352-152X
Editor:
Elsevier
DOI:
10.1016/j.est.2022.105910
Autores:
Leyla Najafi, Sebastiano Bellani, Marilena I. Zappia, Michele Serri, Reinier Oropesa-Nuñez, Ahmad Bagheri, Hossein Beydaghi, Rosaria Brescia, Lea Pasquale, Dipak V. Shinde, Yong Zuo, Filippo Drago, Kseniia Mosina, Zdeněk Sofer, Liberato Manna, Francesco Bonaccorso
Publicado en:
Nanoselect, 2021, ISSN 2688-4011
Editor:
Wiley
DOI:
10.1002/nano.202100364
Autores:
Sebastiano Bellani, Leyla Najafi, Mirko Prato, Reinier Oropesa-Nuñez, Beatriz Martín-García, Luca Gagliani, Elisa Mantero, Luigi Marasco, Gabriele Bianca, Marilena I. Zappia, Cansunur Demirci, Silvia Olivotto, Giacomo Mariucci, Vittorio Pellegrini, Massimo Schiavetti, Francesco Bonaccorso
Publicado en:
Chemistry of Materials, 2021, ISSN 1520-5002
Editor:
ACS
DOI:
10.1021/acs.chemmater.1c00763
Autores:
Leyla Najafi, Reinier Oropesa-Nuñez, Sebastiano Bellani, Beatriz Martín-García, Lea Pasquale, Michele Serri, Filippo Drago, Jan Luxa, Zdeněk Sofer, David Sedmidubský, Rosaria Brescia, Simone Lauciello, Marilena I. Zappia, Dipak V. Shinde, Liberato Manna, Francesco Bonaccorso
Publicado en:
ACS Nano, 2021, ISSN 1936-0851
Editor:
American Chemical Society
DOI:
10.1021/acsnano.1c06662
Autores:
Yong Zuo, Sebastiano Bellani, Michele Ferri, Gabriele Saleh, Dipak V. Shinde, Marilena Isabella Zappia, Rosaria Brescia, Mirko Prato, Luca De Trizio, Ivan Infante, Francesco Bonaccorso & Liberato Manna
Publicado en:
Nature communications, 2023, ISSN 2041-1723
Editor:
Nature Publishing Group
DOI:
10.1038/s41467-023-40319-5
Autores:
Marilena Isabella Zappia, Valentina Mastronardi, Sebastiano Bellani, Yong Zuo, Gabriele Bianca, Luca Gabatel, Matteo Gentile, Ahmad Bagheri, Hossein Beydaghi, Filippo Drago, Michele Ferri, Mauro Moglianetti, Pier Paolo Pompa, Liberato Manna, Francesco Bonaccorso
Publicado en:
Electrochimica Acta, 2023, ISSN 0013-4686
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.electacta.2023.142696
Autores:
B.A.C. van de Ven; R.W.H. Sneijders; F.S.J. Hoekstra; H.J. Bergveld; M.C.F. Donkers
Publicado en:
Proceedings of the 2022 American Control Conference, Edición June 2022, 2022
Editor:
IEEE
DOI:
10.23919/acc53348.2022.9867694
Autores:
J.Garche, H.Kren, S. Koller
Publicado en:
Workshop SENSIBAT Zeroing Course, 2022
Editor:
SENSIBAT
Autores:
F.S.J. Hoekstra, H.J. Bergveld, M.C.F. Donkers
Publicado en:
Proceedings of the 2021 American Control Conference, 2021
Editor:
IEEE
Autores:
Feye Hoekstra
Publicado en:
2022
Editor:
TU Eindhoven
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles