CORDIS - Forschungsergebnisse der EU
CORDIS

Cell-integrated SENSIing functionalities for smart BATtery systems with improved performance and safety

Leistungen

Initial Data Management Plan

Initial Data Management Plan specifying which data will be generated in the project the standardsmethodology that will be used how this data will be exploited andor sharedmade accessible for verification and reuse and how this data will be curated and preserved

Final Data Management Plan

Final Data Management Plan to make research data findable, accessible, interoperable and reusable

Report on prototyping 1Ah cells with integrated level 2 sensors

Report on prototyping of 20x 1Ah baseline pouch battery cells with integrated level 2 sensors

Advanced module-level state estimators based on level 1 sensors

Advanced module-level SOC, SOH, SOE, SOP and SOS estimators based on level 1 sensors: report + software

Report adaptation level 1 sensors

Report on adaptation of level 1 sensors for incorporation into battery cells

Dissemination and Exploitation Plan

The Dissemination and Exploitation Plan see section 222 for more details

Testing plan for cells and modules

Testing plan containing procedures for testing baseline cells cells with integrated sensors and the modules

Project Handbook

Project Handbook describing all procedures of the project contains a detailed Gantt chart and work breakdown structure including a schedule per task with responsible partners use of resources deliverables and dependencies to other tasks

Report on development of electrical connections

Report on development of the printed electrical connections and their encapsulation[

Report on level 2 sensor characterisation

Report on level 2 sensor morphological and electrochemical characterisation

Test report on cell and module performance and safety

The testing report will contain all results from T5.1 and will be updated incrementally as results become available. Due to the larger amount of data expected compared to a scenario without cell-integrated sensors, special consideration will be given to data aspects such as data storage, analysis, compression, metadata/descriptors, correlation and combination with other data

Initial Quality Assurance and Risk Management plan

Initial Quality Assurance and Risk Management Plan for project quality and risk management

Final Quality Assurance and Risk Management plan

Final Quality Assurance and Risk Management Plan for project quality and risk management including an updated, extended and completed risk analysis

Use cases, KPIs and cell, module requirements

Report containing a description of the use cases the KPIs and an overview of the requirements at cell and module level

Report on prototyping baseline pouch battery cells

Report on prototyping of 40x 1Ah baseline pouch battery cells and 20x 5Ah baseline pouch battery cells

Advanced state estimation algorithms based on level 2 sensors

Report on advanced SOC, SOH, SOE, SOP and SOS estimation algorithms based on level 2 sensors

Recycling assessment and integrated validation

D5.3 will contain the recycling assessment. Furthermore it will consider the results obtained in the testing (T5.1) and those from the cost benefit assessment (T5.2) in order to come to an overall technical, economic, manufacturing and (limited) environmental assessment of the sensor-equipped cells and modules, and whether these are able to meet the expectations placed on them [

Report on prototyping 1Ah cells with integrated level 1 sensors

Report on prototyping of 20x 1Ah baseline pouch battery cells with integrated level 1 sensors

Cost benefit assessment

The cost benefit assessment will use the bills of materials to estimate the materials cost and will use process descriptions to estimate energy and labour costs for the lab scale. Appropriate assumptions will be used to estimate the costs at upscaled production volumes. Benefits like shorter charging time, increase capacity and extended lifetime will be assessed

Report on selection of inks and pastes

Report on selection of inks and pastes with different rheological properties and solvent formulations

Report on prototyping 5Ah cells with integrated level 1 sensors

Report on prototyping of 20x 5Ah baseline pouch battery cells with integrated level 1 sensors

Report on development of printed electrodes on cell components

Report on development of printed electrodes on cell components and their performance evaluation

Report on characterisation of pouch cell with integrated level 2 sensor

Report on prototyping of 40x 1Ah baseline pouch battery cells and 20x 5Ah baseline pouch battery cells

SENSIBAT project identity

The SENSIBAT project identity contains a logo leaflet power point presentation and audiovisual material for public presentations

I SENSIBAT AB workshop

1st SENSIBAT Advisory Board workshop

II SENSIBAT AB workshop

2nd SENSIBAT Advisory Board workshop

BMS-master software environment

BMS-master software environment implemented on a rapid prototyping platform

BMS-slave—equipped battery module based on the series connection of at least six 5Ah prototype pouch cells with level 1 sensors

Demonstrator battery module based on the series connection of at least six 5Ah pouch cells with level 1 sensors and equipped with BMS-slave board, and the junction box

BMS-slave demonstrator supporting the read out of cell-integrated level 1 sensors

BMS-slave supporting the read out of cell-integrated pressure and temperature sensors (level 1)

Project website

Project website used for communication purposes including events news projects facts partners public deliverables etc

Veröffentlichungen

Functionalized Metallic 2D Transition Metal Dichalcogenide-Based Solid-State Electrolyte for Flexible All-Solid-State Supercapacitors

Autoren: Ahmad Bagheri, Sebastiano Bellani, Hossein Beydaghi, Matilde Eredia, Leyla Najafi, Gabriele Bianca, Marilena Isabella Zappia, Milad Safarpour, Maedeh Najafi, Elisa Mantero, Zdenek Sofer, Guorong Hou, Vittorio Pellegrini, Xinliang Feng, Francesco Bonaccorso
Veröffentlicht in: ACS Nano, 2022, ISSN 1936-0851
Herausgeber: American Chemical Society
DOI: 10.1021/acsnano.2c05640

Solution-processed two-dimensional materials for next-generation photovoltaics

Autoren: Sebastiano Bellani, Antonino Bartolotta, Antonio Agresti, Giuseppe Calogero, Giulia Grancini, Aldo Di Carlo, Emmanuel Kymakis, Francesco Bonaccorso
Veröffentlicht in: Chemical Society Reviews, 2021, ISSN 0306-0012
Herausgeber: Royal Society of Chemistry
DOI: 10.1039/d1cs00106j

Sulfonated NbS2-based proton-exchange membranes for vanadium redox flow batteries

Autoren: Hossein Beydaghi, Sebastiano Bellani, Leyla Najafi, Reinier Oropesa-Nuñez, Gabriele Bianca, Ahmad Bagheri, Irene Conticello, Beatriz Martín-García, Sepideh Kashefi, Michele Serri, Liping Liao, Zdeněk Sofer, Vittorio Pellegrini, Francesco Bonaccorso
Veröffentlicht in: Nanoscale, 2022, ISSN 2040-3372
Herausgeber: RSC
DOI: 10.1039/d1nr07872k

"""Rapid empirical battery electromotive-force and overpotential modelling using input–output linear parameter-varying methods"""

Autoren: F.S.J. Hoekstra, M.C.F. Donkers, H.J. Bergveld
Veröffentlicht in: Journal of Energy Storage, Ausgabe vol. 65, 2023, 2023, ISSN 2352-152X
Herausgeber: Elsevier
DOI: 10.1016/j.est.2023.107185

Carbon-α-Fe2O3 Composite Active Material for High-Capacity Electrodes with High Mass Loading and Flat Current Collector for Quasi-Symmetric Supercapacitors

Autoren: Maedeh Najafi, Sebastiano Bellani, Valerio Galli, Marilena Isabella Zappia, Ahmad Bagheri, Milad Safarpour, Hossein Beydaghi, Matilde Eredia, Lea Pasquale, Riccardo Carzino, Simone Lauciello, Jaya-Kumar Panda, Rosaria Brescia, Luca Gabatel, Vittorio Pellegrini, Francesco Bonaccorso
Veröffentlicht in: Electrochem, 2022, ISSN 2673-3293
Herausgeber: MDPI
DOI: 10.3390/electrochem3030032

High-energy density aqueous supercapacitors: The role of electrolyte pH and KI redox additive

Autoren: Matilde Eredia, Sebastiano Bellani, Marilena I. Zappia, Luca Gabatel, Valerio Galli, Ahmad Bagheri, Hossein Beydaghi, Gabriele Bianca, Irene Conticello, Vittorio Pellegrini, Francesco Bonaccorso
Veröffentlicht in: APL Materials, 2022, ISSN 2166-532X
Herausgeber: AIP
DOI: 10.1063/5.0106932

3D printed silicon-few layer graphene anode for advanced Li-ion batteries

Autoren: Hossein Beydaghi, Sara Abouali, Sanjay B. Thorat, Antonio Esau Del Rio Castillo, Sebastiano Bellani, Simone Lauciello, Silvia Gentiluomo, Vittorio Pellegrini, Francesco Bonaccorso
Veröffentlicht in: RSC Advances, 2021, ISSN 2046-2069
Herausgeber: Royal Society of Chemistry
DOI: 10.1039/d1ra06643a

"""Comparison of battery electromotive-force measurement and modellingapproaches"""

Autoren: F.S.J.Hoekstra; L.H.J.Raijmakers; M.C.F.Donkers; H.J.Bergveld
Veröffentlicht in: Journal of Energy Storage, Ausgabe Volume 56, December 2022, 2022, ISSN 2352-152X
Herausgeber: Elsevier
DOI: 10.1016/j.est.2022.105910

Transition metal dichalcogenides as catalysts for the hydrogen evolution reaction: The emblematic case of “inert” ZrSe2 as catalyst for electrolyzers

Autoren: Leyla Najafi, Sebastiano Bellani, Marilena I. Zappia, Michele Serri, Reinier Oropesa-Nuñez, Ahmad Bagheri, Hossein Beydaghi, Rosaria Brescia, Lea Pasquale, Dipak V. Shinde, Yong Zuo, Filippo Drago, Kseniia Mosina, Zdeněk Sofer, Liberato Manna, Francesco Bonaccorso
Veröffentlicht in: Nanoselect, 2021, ISSN 2688-4011
Herausgeber: Wiley
DOI: 10.1002/nano.202100364

Graphene-Based Electrodes in a Vanadium Redox Flow Battery Produced by Rapid Low-Pressure Combined Gas Plasma Treatments

Autoren: Sebastiano Bellani, Leyla Najafi, Mirko Prato, Reinier Oropesa-Nuñez, Beatriz Martín-García, Luca Gagliani, Elisa Mantero, Luigi Marasco, Gabriele Bianca, Marilena I. Zappia, Cansunur Demirci, Silvia Olivotto, Giacomo Mariucci, Vittorio Pellegrini, Massimo Schiavetti, Francesco Bonaccorso
Veröffentlicht in: Chemistry of Materials, 2021, ISSN 1520-5002
Herausgeber: ACS
DOI: 10.1021/acs.chemmater.1c00763

Topochemical Transformation of Two-Dimensional VSe2 into Metallic Nonlayered VO2 for Water Splitting Reactions in Acidic and Alkaline Media

Autoren: Leyla Najafi, Reinier Oropesa-Nuñez, Sebastiano Bellani, Beatriz Martín-García, Lea Pasquale, Michele Serri, Filippo Drago, Jan Luxa, Zdeněk Sofer, David Sedmidubský, Rosaria Brescia, Simone Lauciello, Marilena I. Zappia, Dipak V. Shinde, Liberato Manna, Francesco Bonaccorso
Veröffentlicht in: ACS Nano, 2021, ISSN 1936-0851
Herausgeber: American Chemical Society
DOI: 10.1021/acsnano.1c06662

High-performance alkaline water electrolyzers based on Ru-perturbed Cu nanoplatelets cathode

Autoren: Yong Zuo, Sebastiano Bellani, Michele Ferri, Gabriele Saleh, Dipak V. Shinde, Marilena Isabella Zappia, Rosaria Brescia, Mirko Prato, Luca De Trizio, Ivan Infante, Francesco Bonaccorso & Liberato Manna
Veröffentlicht in: Nature communications, 2023, ISSN 2041-1723
Herausgeber: Nature Publishing Group
DOI: 10.1038/s41467-023-40319-5

Graphene vs. carbon black supports for Pt nanoparticles: Towards next-generation cathodes for advanced alkaline electrolyzers

Autoren: Marilena Isabella Zappia, Valentina Mastronardi, Sebastiano Bellani, Yong Zuo, Gabriele Bianca, Luca Gabatel, Matteo Gentile, Ahmad Bagheri, Hossein Beydaghi, Filippo Drago, Michele Ferri, Mauro Moglianetti, Pier Paolo Pompa, Liberato Manna, Francesco Bonaccorso
Veröffentlicht in: Electrochimica Acta, 2023, ISSN 0013-4686
Herausgeber: Pergamon Press Ltd.
DOI: 10.1016/j.electacta.2023.142696

Combined Cell-Level Estimation of State-of-Charge and Temperature in Battery Packs

Autoren: B.A.C. van de Ven; R.W.H. Sneijders; F.S.J. Hoekstra; H.J. Bergveld; M.C.F. Donkers
Veröffentlicht in: Proceedings of the 2022 American Control Conference, Ausgabe June 2022, 2022
Herausgeber: IEEE
DOI: 10.23919/acc53348.2022.9867694

SENSIBAT Zeroing course - Ageing processes and Battery State Estimation

Autoren: J.Garche, H.Kren, S. Koller
Veröffentlicht in: Workshop SENSIBAT Zeroing Course, 2022
Herausgeber: SENSIBAT

Towards State-of-Charge Estimation for Battery Packs: Reducing Computational Complexity by Optimising Model Sampling Time and Update Frequency of the Extended Kalman Filter

Autoren: F.S.J. Hoekstra, H.J. Bergveld, M.C.F. Donkers
Veröffentlicht in: Proceedings of the 2021 American Control Conference, 2021
Herausgeber: IEEE

Battery Electric Vehicle Range Extension by Empirical Battery Modelling, State Estimation and Active Cell Balancing

Autoren: Feye Hoekstra
Veröffentlicht in: 2022
Herausgeber: TU Eindhoven

Suche nach OpenAIRE-Daten ...

Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten

Es liegen keine Ergebnisse vor