Skip to main content
European Commission logo print header

Interlinked Process, Product and Data Quality framework for Zero-Defects Manufacturing

Resultado final

Publicaciones

ALTERNATIVE EXPERIMENTAL METHODS FOR MACHINE TOOL DYNAMICS IDENTIFICATION: A REVIEW

Autores: Alexander IglesiasL.Taner TunçOrkun ÖzsahinOier FrancoJokin MunoaErhan Budak
Publicado en: Mechanical Systems and Signal Processing, Issue Volume 170, 1 May 2022, 108837, 2022, ISSN 0888-3270
Editor: Academic Press
DOI: 10.1016/j.ymssp.2022.108837

Improvement of boring operations by means of mode coupling effect

Autores: Asier Astarloa; Alptunc Comak; Iker Mancisidor; Maria Helena Fernandes; Jokin Munoa; Zoltan Dombovari
Publicado en: CIRP Journal of Manufacturing Science and Technology, Issue Volume 37, May 2022, 2022, Page(s) Pages 633-644, ISSN 1755-5817
Editor: Elsevier BV
DOI: 10.1016/j.cirpj.2022.03.008

Virtual sensors for erroneous data repair in manufacturing a machine learning pipeline

Autores: Sagar Sen Erik Johannes Husom Arda Goknil Dimitra Politaki Simeon Tverdal Phu Nguyen Nicolas Jourdan
Publicado en: Computers in Industry, Issue Volume 149, August 2023, 103917, 2023, ISSN 0166-3615
Editor: Elsevier BV
DOI: 10.1016/j.compind.2023.103917

FINGERPRINT: MACHINE TOOL CONDITION MONITORING APPROACH FOR ZERO DEFECT MANUFACTURING

Autores: M. ARMENDIA J. SAN SEBASTIAN D. GONZALEZ B. SANTAMARIA J. A. GONZALEZ R. GONZALEZ-VELAZQUEZ K. LOPEZ DE CALLE
Publicado en: MM Science Journal, Issue Special Issue. November 2021 | HSM 2021, 2021, ISSN 1803-1269
Editor: MM Publishing
DOI: 10.17973/mmsj.2021_11_2021159

Software Engineering and AI for Data Quality in Cyber- Physical Systems - SEA4DQ'21 Workshop Report

Autores: Phu H. Nguyen; Sagar Sen; Nicolas Jourdan; Beatriz Cassoli; Per Myrseth; Mikel Armendia; Odd Myklebust
Publicado en: ACM SIGSOFT Software Engineering Notes, Issue Volume 47, Issue 1, 2022, Page(s) pp 26–29, ISSN 0163-5948
Editor: Association for Computing Machinery (ACM)
DOI: 10.1145/3502771.3502781

FRAMEWORK FOR COUPLED DIGITAL TWINS IN DIGITAL MACHINING

Autores: D. PLAKHOTNIK A. CURUTIU A. ZHULAVSKYI XAVIER BEUDAERT JOKIN MUNOA M. STAUTNER
Publicado en: MM Science Journal, Issue Special Issue. November 2021 | HSM 2021, 2021, ISSN 1803-1269
Editor: MM Publishing
DOI: 10.17973/mmsj.2021_11_2021158

IDENTIFICATION OF THE ROOT CAUSE OF SURFACE TOPOGRAPHY INACCURACIES BY MEANS OF PROCESS MONITORING: INDUSTRIAL EXAMPLES

Autores: M. GIL X. BEUDAERT J. MUNOA D. BARRENETEXEA J.A. SANCHEZ
Publicado en: MM Science Journal, Issue Special Issue. November 2021 | HSM 2021, 2021, ISSN 1803-1269
Editor: MM Publishing
DOI: 10.17973/mmsj.2021_11_2021169

ALTERNATIVE EXPERIMENTAL METHODS FOR MACHINE TOOL DYNAMICS IDENTIFICATION: A REVIEW

Autores: Alexander Iglesias L.Taner Tunç Orkun Özsahin Oier Franco Jokin Munoa Erhan Budak
Publicado en: Mechanical Systems and Signal Processing, Issue Volume 170, 1 May 2022, 108837, 2022, ISSN 0888-3270
Editor: Academic Press
DOI: 10.1016/j.ymssp.2022.108837

Uncertainty-aware Virtual Sensors for Cyber-Physical Systems

Autores: S. Sen, E. J. Husom, A. Goknil, S. Tverdal and P. Nguyen
Publicado en: IEEE Software, 2023, ISSN 0740-7459
Editor: Institute of Electrical and Electronics Engineers
DOI: 10.1109/ms.2023.3306873

Equation-free bifurcation analysis of a stochastically excited Duffing oscillator

Autores: Zoltan Gabos; David A.W. Barton; Zoltan Dombovari
Publicado en: Journal of Sound and Vibration, Issue Volume 547, 17 March 2023, 117536, 2023, ISSN 0022-460X
Editor: Academic Press
DOI: 10.1016/j.jsv.2022.117536

Estimation of Drag Finishing Abrasive Effect for Cutting Edge Preparation in Broaching Tool

Autores: Cristian Fabian Pérez-Salinas; Ander Del Olmo Sanz; Luis Norberto López de Lacalle
Publicado en: Materials, Issue 2022, 15(15), 5135, 2022, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma15155135

A Systematic Review of Data Quality in CPS and IoT for Industry 4.0

Autores: Goknil, Arda and Nguyen, Phu and Sen, Sagar and Politaki, Dimitra and Niavis, Harris and Pedersen, Karl John and Suyuthi, Abdillah and Anand, Abhilash and Ziegenbein, Amina
Publicado en: ACM Computing Surveys, Issue 55, 14s, 2023, ISSN 0360-0300
Editor: Association for Computing Machinary, Inc.
DOI: 10.1145/3593043

Taming Data Quality in AI-Enabled Industrial Internet of Things

Autores: Sagar Sen; Erik Johannes Husom; Arda Goknil; Simeon Tverdal; Phu Nguyen; Iker Mancisidor
Publicado en: IEEE Software, Issue Volume: 39, Issue: 6, Nov.-Dec. 2022, 2022, Page(s) 35-42, ISSN 0740-7459
Editor: Institute of Electrical and Electronics Engineers
DOI: 10.1109/ms.2022.3193975

TOOL WEAR MONITORING OF HIGH-SPEED BROACHING PROCESS WITH CABIDE TOOLS TO REDUCE PRODUCTION ERRORS

Autores: A.del Olmo L.N.López de Lacalle G.Martínez de Pissón C.Pérez-Salinas J.A.Ealo L.Sastoque M.H.Fernandes
Publicado en: Mechanical Systems and Signal Processing, Issue Volume 172, 1 June 2022, 109003, 2022, ISSN 0888-3270
Editor: Academic Press
DOI: 10.1016/j.ymssp.2022.109003

A decade of research on patterns and architectures for IoT security

Autores: Tanusan Rajmohan; Phu H. Nguyen; Nicolas Ferry
Publicado en: Cybersecurity, Issue 5 (2), 2022, ISSN 2523-3246
Editor: Springer
DOI: 10.1186/s42400-021-00104-7

A blockchain-based framework for trusted quality data sharing towards zero-defect manufacturing

Autores: Mauro Isaja; Phu Nguyen; Arda Goknil; Sagar Sen; Erik Johannes Husom; Simeon Tverdal; Abhilash Anand; Yunman Jiang; Karl John Pedersen; Per Myrseth; Jørgen Stang; Harris Niavis; Simon Pfeifhofer; Patrick Lamplmair
Publicado en: Computers in Industry, Issue Volume 146, April 2023, 103853, 2023, ISSN 0166-3615
Editor: Elsevier BV
DOI: 10.1016/j.compind.2023.103853

Early detection of tool wear in electromechanical broaching machines by monitoring main stroke servomotors

Autores: Iñigo Aldekoa, Ander del Olmo, Leonardo Sastoque-Pinilla, Sara Sendino-Mouliet, Unai Lopez-Novoa, Luis Norberto López de Lacalle,
Publicado en: Mechanical Systems and Signal Processing, Issue Volume 204, 2023, ISSN 0888-3270
Editor: Academic Press
DOI: 10.1016/j.ymssp.2023.110773

Virtual vibration absorber for active forced vibration reduction

Autores: O. Franco M. Gil-Inchaurza D. Barrenetxea X. Beudaert
Publicado en: CIRP Annals, Issue Volume 72, Issue 1, 2023, 2023, Page(s) 329-332, ISSN 0007-8506
Editor: Hallwag AG
DOI: 10.1016/j.cirp.2023.04.006

Traceable on-machine tool coordinate measurement through the integration of a virtual metrology frame in large machine tools

Autores: Unai Mutilba; José A. Yagüe-Fabra; Fernando Egaña; Gorka Kortaberria; Luis Uriarte
Publicado en: CIRP Annals, Issue Volume 72, Issue 1, 2023, 2023, Page(s) 453-456, ISSN 0007-8506
Editor: Hallwag AG
DOI: 10.1016/j.cirp.2023.03.037

UDAVA: an unsupervised learning pipeline for sensor data validation in manufacturing

Autores: Husom, Erik Johannes; Tverdal, Simeon; Goknil, Arda; Sen, Sagar
Publicado en: 2022 IEEE/ACM 1st International Conference on AI Engineering – Software Engineering for AI (CAIN), 2022
Editor: 2022 IEEE/ACM 1st International Conference on AI Engineering – Software Engineering for AI (CAIN)
DOI: 10.1145/3522664.3528603

MACHINE LEARNING FOR INTELLIGENT MAINTENANCE AND QUALITY CONTROL: A REVIEW OF EXISTING DATASETS AND CORRESPONDING USE CASES

Autores: Jourdan, N. Longard, L. Biegel, T. Metternich, J.
Publicado en: Proceedings of the Conference on Production Systems and Logistics : CPSL 2021, 2021
Editor: Institutionelles Repositorium der Leibniz Universität Hannover
DOI: 10.15488/11280

CT IMAGE QUALITY INFLUENCE ON DIFFERENT MATERIAL EDGE RESPONSE FUNCTIONS FOR ACCURATE METROLOGICAL APPLICATIONS

Autores: I Holgado J Iglesias N Ortega S Plaza A Pascual
Publicado en: IOP Conference Series: Materials Science and Engineering, Issue Volume 1193, 9th Manufacturing Engineering Society International Conference (MESIC 2021) 23rd-25th June 2021, Gijόn, Spain, 2021
Editor: IOP Science
DOI: 10.1088/1757-899x/1193/1/012064

A Systematic Review of Secure IoT Data Sharing

Autores: Thanh Thao Thi Tran Phu H. Nguyen Gencer Erdogan
Publicado en: n Proceedings of the 9th International Conference on Information Systems Security and Privacy (ICISSP 2023), 2023, Page(s) pages 95-105, ISSN 2184-4356
Editor: SCITEPRESS – Science and Technology Publications
DOI: 10.5220/0011674200003405

AutoConf : Automated Configuration of Unsupervised Learning Systems using Metamorphic Testing and Bayesian Optimization

Autores: Lwin Khin Shar Arda Gokni Erik Johannes Husom Sagar Sen Yan Naing Tun Kisub Kim
Publicado en: 38th IEEE/ACM International Conference on Automated Software Engineering ((ASE 2023)), 2023
Editor: ASE 2023 Research Papers
DOI: 10.5281/zenodo.8420095

Description of elastic and plastic properties of microstructures on high-performance surfaces of transmission parts by means of angle-resolved scattered light method

Autores: Boris Brodmann
Publicado en: Aachen Conference on Gear Production 2022, 2023
Editor: Aachen Conference on Gear Production 2022
DOI: 10.5281/zenodo.8398302

ON THE RELIABILITY OF MACHINE LEARNING APPLICATIONS IN MANUFACTURING ENVIRONMENTS

Autores: Nicolas Jourdan Sagar Sen Erik Johannes Husom Enrique Garcia-Ceja Tobias Biegel Joachim Metternich
Publicado en: Workshop on Distribution Shifts, 35th Conference on Neural Information Processing Systems (NeurIPS 2021), Issue 35th Conference on Neural Information Processing Systems (NeurIPS 2021), 2021
Editor: Conference on Neural Information Processing Systems
DOI: 10.48550/arxiv.2112.06986

Towards real time monitoring of an aeronautical machining process using scalable technologies

Autores: Endika Tapia; Leonardo Sastoque-Pinilla; Norberto López De Lacalle; Unai Lopez-Novoa
Publicado en: Proceedings of the 2022 7th International Conference on Smart and Sustainable Technologies (SpliTech), 2022
Editor: IEEE
DOI: 10.23919/splitech55088.2022.9854213

ANALYSIS OF THE EFFECT OF POROSITY ON THE MECHANICAL BEHAVIOUR OF L-PBF INCONEL 718 USING XRCT

Autores: A PascualN OrtegaS PlazaI Holgado
Publicado en: IOP Conference Series: Materials Science and Engineering, 2021
Editor: IOP Science
DOI: 10.1088/1757-899x/1193/1/012066

ANALYSIS OF THE EFFECT OF POROSITY ON THE MECHANICAL BEHAVIOUR OF L-PBF INCONEL 718 USING XRCT

Autores: A Pascual N Ortega S Plaza I Holgado
Publicado en: IOP Conference Series: Materials Science and Engineering, Issue Volume 1193, 9th Manufacturing Engineering Society International Conference (MESIC 2021) 23rd-25th June 2021, Gijόn, Spain, 2021
Editor: IOP Science
DOI: 10.1088/1757-899x/1193/1/012066

Replay-Driven Continual Learning for the Industrial Internet of Things

Autores: S. Sen, S. M. Nielsen, E. J. Husom, A. Goknil, S. Tverdal and L. S. Pinilla
Publicado en: 2023 IEEE/ACM 2nd International Conference on AI Engineering – Software Engineering for AI (CAIN), 2023
Editor: IEEE/ACM
DOI: 10.1109/cain58948.2023.00014

A new benchmark dataset for machine learning applications in discrete manufacturing: CiP-DMD

Autores: Nicolas Jourdan Tobias Biegel Beatriz Bretones Cassoli Joachim Metternich
Publicado en: Proceedings of the 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 2023
Editor: Elsevier
DOI: 10.5281/zenodo.8420131

On The Reliability Of Machine Learning Applications In Manufacturing Environments

Autores: Jourdan, Nicolas; Sen, Sagar; Husom, Erik Johannes; Garcia-Ceja, Enrique; Biegel, Tobias; Metternich, Joachim
Publicado en: Workshop on Distribution Shifts, 35th Conference on Neural Information Processing Systems (NeurIPS 2021), 2021
Editor: Workshop on Distribution Shifts, 35th Conference on Neural Information Processing Systems (NeurIPS 2021)
DOI: 10.48550/arxiv.2112.06986

CT IMAGE QUALITY INFLUENCE ON DIFFERENT MATERIAL EDGE RESPONSE FUNCTIONS FOR ACCURATE METROLOGICAL APPLICATIONS

Autores: I HolgadoJ IglesiasN OrtegaS PlazaA Pascual
Publicado en: IOP Conference Series: Materials Science and Engineering, Issue 9th Manufacturing Engineering Society International Conference (MESIC 2021) 23rd-25th June 2021, Gijόn, Spain, 2021
Editor: IOP Science
DOI: 10.1088/1757-899x/1193/1/012064

Toward the Sustainable Development of Machine Learning Applications in Industry 4.0

Autores: Ellenrieder, Sara; Jourdan, Nicolas; Biegel, Tobias; Cassoli, Beatriz B.; Metternich, Joachim; and Buxmann, Peter
Publicado en: ECIS 2023 Research Papers, 2023
Editor: European Conference on Information Systems (ECIS)

Frameworks for data-driven quality management in cyber-physical systems for manufacturing: A systematic review

Autores: Beatriz Bretones Cassoli; Nicolas Jourdan; Phu H. Nguyen; Sagar Sen; Enrique Garcia-Ceja; Joachim Metternich
Publicado en: Procedia CIRP, Issue Volume 112, 2022, 2022, Page(s) 567-572
Editor: Elsevier
DOI: 10.1016/j.procir.2022.09.062

Knowledge Graphs for Data And Knowledge Management in Cyber-Physical Production Systems

Autores: Bretones Cassoli, Beatriz; Jourdan, Nicolas; Metternich, Joachim; Herberger, David; Hübner, Marco
Publicado en: Proceedings of the Conference on Production Systems and Logistics: CPSL 2022, Issue 1, 2022
Editor: Proceedings of the Conference on Production Systems and Logistics: CPSL 2022
DOI: 10.15488/12180

Buscando datos de OpenAIRE...

Se ha producido un error en la búsqueda de datos de OpenAIRE

No hay resultados disponibles